Public bug reported:
Binary package hint: hal
OS installed:
Kubuntu 7.04 (Feisty)
Problem Description:
When I update hal on my laptop from version 0.5.8.1-4ubuntu12 to
0.5.9-1ubuntu2~feisty1, the USB host controller on my system appears to
constantly reset, according to the dmesg logs
>From dmesg:
[ 629.192000] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 630.564000] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 664.352000] usb 5-7: reset high speed USB device using ehci_hcd and address 4
[ 665.724000] usb 5-7: reset high speed USB device using ehci_hcd and address 4
>From lsusb:
[EMAIL PROTECTED]:~$ lsusb
Bus 005 Device 004: ID 0b05:1726 ASUSTek Computer, Inc.
Bus 005 Device 003: ID 05e1:0501 Syntek Semiconductor Co., Ltd
Bus 005 Device 001: ID 0000:0000
Bus 004 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
Bus 003 Device 002: ID 0b05:1712 ASUSTek Computer, Inc.
Bus 003 Device 001: ID 0000:0000
>From lspci:
[EMAIL PROTECTED]:~$ lspci
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS/940GML and 945GT
Express Memory Controller Hub (rev 03)
00:01.0 PCI bridge: Intel Corporation Mobile 945GM/PM/GMS/940GML and 945GT
Express PCI Express Root Port (rev 03)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition
Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1
(rev 02)
00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4
(rev 02)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev
02)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev
02)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev
02)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev
02)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI
Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge
(rev 02)
00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) Serial ATA
Storage Controller IDE (rev 02)
01:00.0 VGA compatible controller: nVidia Corporation Unknown device 0397 (rev
a1)
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI
Express Gigabit Ethernet controller (rev 01)
03:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG Network
Connection (rev 02)
04:01.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev b3)
04:01.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394 Controller (rev 08)
04:01.2 Generic system peripheral [0805]: Ricoh Co Ltd R5C822
SD/SDIO/MMC/MS/MSPro Host Adapter (rev 17)
04:01.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter
(rev 08)
My USB controller is an Intel 82801G (ICH7 Family)
The USB resets will continue until I either unload the usbhid module, or
until I revert back to the earlier version of the hal package
** Affects: hal (Ubuntu)
Importance: Undecided
Status: Unconfirmed
--
HAL resets USB device(s)
https://bugs.launchpad.net/bugs/115691
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
