my nic is:
09:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd.
88E8071 PCI-E Gigabit Ethernet Controller [11ab:436b] (rev 16)
the home server is plugged into a 10/100mbit switch. no jumbo frames:
root@media:~# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP
qlen 1000
link/ether 00:26:2d:02:d3:c7 brd ff:ff:ff:ff:ff:ff
inet 192.168.1.11/24 brd 192.168.1.255 scope global eth0
inet 192.168.1.111/24 brd 192.168.1.255 scope global secondary eth0:0
inet6 fe80::226:2dff:fe02:d3c7/64 scope link
valid_lft forever preferred_lft forever
root@media:~# mii-tool eth0
eth0: negotiated 100baseTx-FD flow-control, link ok
unfortunately, Dmik's hint did not help :(
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/488153
Title:
NETDEV WATCHDOG: eth0 (sky2): transmit queue 0 timed out
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
