Same problem here:
Bus 002 Device 002: ID 07d1:3300 D-Link System DWA-130 802.11n Wireless
N Adapter(rev.E) [Realtek RTL8192SU]
michael@computer-main:~$ modprobe -l |grep r8169
kernel/drivers/net/r8169.ko
[ 0.818029] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 0.818049] r8169 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.818087] r8169 0000:04:00.0: setting latency timer to 64
[ 0.818127] alloc irq_desc for 44 on node -1
[ 0.818129] alloc kstat_irqs on node -1
[ 0.818142] r8169 0000:04:00.0: irq 44 for MSI/MSI-X
[ 0.824542] r8169 0000:04:00.0: eth0: RTL8168c/8111c at 0xf845e000,
00:01:29:a7:66:7c, XID 1c4000c0 IRQ 44
...
[ 8.746907] r8169 0000:04:00.0: eth0: link up
[ 8.746913] r8169 0000:04:00.0: eth0: link up
If I connect to a WPA2 secured wireless connection, it works:
Mar 27 09:56:12 computer-main kernel: [ 1983.946254] Linking with
fermmy_unplugged,channel:1, qos:1, myHT:1, networkHT:1, mode:10
Mar 27 09:56:12 computer-main kernel: [ 1983.946258]
============>HTIOTActIsForcedRTSCTS(), 0
Mar 27 09:56:12 computer-main kernel: [ 1983.946260]
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00008440
Mar 27 09:56:12 computer-main kernel: [ 1983.947249]
===>ieee80211_associate_procedure_wq(), chan:1
Mar 27 09:56:12 computer-main kernel: [ 1984.010470]
=================>ieee80211_authentication_req():auth->algorithm is 0
Mar 27 09:56:12 computer-main kernel: [ 1984.014374] Associated successfully
Mar 27 09:56:12 computer-main kernel: [ 1984.014376] Using G rates:108
Mar 27 09:56:12 computer-main kernel: [ 1984.014378] Successfully associated,
ht enabled
Mar 27 09:56:12 computer-main kernel: [ 1984.015227] ====================>rx
ADDBAREQ from :48:5b:39:e7:96:ff
Mar 27 09:56:12 computer-main kernel: [ 1984.015234] =====>to send ADDBARSP
Mar 27 09:56:12 computer-main kernel: [ 1984.076693]
!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
Mar 27 09:56:12 computer-main kernel: [ 1984.079188]
=============>ARFR0+rate_index*4:0x100ff005
Mar 27 09:56:12 computer-main kernel: [ 1984.085693] ============>normal
associate
Mar 27 09:56:12 computer-main kernel: [ 1984.090625] alg name:CCMP
Mar 27 09:56:12 computer-main kernel: [ 1984.094866] alg name:CCMP
Mar 27 09:56:27 computer-main kernel: [ 1998.985645]
=============>ARFR0+rate_index*4:0x100ff005
Mar 27 09:57:07 computer-main kernel: [ 2038.989207]
=============>ARFR0+rate_index*4:0x100ff005
Mar 27 09:58:07 computer-main kernel: [ 2098.979375]
=============>ARFR0+rate_index*4:0x100ff005
However, trying to connect to an unsecured wireless access point doesn't work:
Mar 27 09:55:57 computer-main kernel: [ 1968.848012] Linking with
linksys,channel:6, qos:0, myHT:1, networkHT:0, mode:6
Mar 27 09:55:57 computer-main kernel: [ 1968.848017]
===>ieee80211_associate_procedure_wq(), chan:6
Mar 27 09:55:57 computer-main kernel: [ 1968.910968]
=================>ieee80211_authentication_req():auth->algorithm is 0
Mar 27 09:56:00 computer-main kernel: [ 1971.416011] Linking with
linksys,channel:6, qos:0, myHT:1, networkHT:0, mode:6
Mar 27 09:56:01 computer-main kernel: [ 1972.952020]
===>ieee80211_associate_procedure_wq(), chan:6
Mar 27 09:56:01 computer-main kernel: [ 1973.015372]
=================>ieee80211_authentication_req():auth->algorithm is 0
[repeating as mentioned above]
** Changed in: linux (Ubuntu)
Status: New => Confirmed
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/652138
Title:
lucid->maverick rtl8192 stops working
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
