appears to be a lot of rumours ans multiple bug reports here but this looks like the one for not auto mounting I'm not sure it is a tifm module issue as HAL responds correctly on card insertion see below
I have rebuilt the tifm modules from http://openfacts.berlios.de/index-en...12/xx21_driver to replace the hopelessly buggy stock 2.6.20 kernel All is good and installing the card gives [ 714.680000] tifm_core: MMC/SD card detected in socket 0:3 [ 714.972000] mmcblk0: mmc3:0001 SDMMC 508800KiB [ 714.972000] mmcblk0: p1 fdisk -l Disk /dev/sda: 60.0 GB, 60011642880 bytes 240 heads, 63 sectors/track, 7752 cylinders Units = cylinders of 15120 * 512 = 7741440 bytes Device Boot Start End Blocks Id System /dev/sda1 1 250 1889968+ 82 Linux swap / Solaris /dev/sda2 251 7752 56715120 83 Linux Disk /dev/mmcblk0: 521 MB, 521011200 bytes 9 heads, 24 sectors/track, 4711 cylinders Units = cylinders of 216 * 512 = 110592 bytes Device Boot Start End Blocks Id System /dev/mmcblk0p1 2 4712 508685+ 6 FAT16 so all is good manual mounting the card works a treat to but feisty will not automount on insertion this is a retrograde for edgy as with the .6 drivers it worked. I suspect this is a mmc problem as lshal -m gives Start monitoring devicelist: ------------------------------------------------- pci_104c_8033_mmc_host added on card insertion so why doesn't fiesty react to the hal event ?? -- tifm: Texas Instruments Card reader not working https://bugs.launchpad.net/bugs/53923 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
