I'll add some info to this, since I experience the same behaviour. Might
be related to bugs #98684, #98721 and/or #99003 and/or more.
I'm using kubuntu feisty beta ("release") with latest updates from
today. Running with xorg driver "ati" is fine, using fglrx is not.
xorg.conf (part):
Section "Device"
identifier "ATI Technologies Inc Radeon R300 NE [Radeon 9500 Pro]"
boardname "ati"
busid "PCI:2:0:0"
driver "fglrx"
screen 0
EndSection
Hardware:
02:00.0 VGA compatible controller: ATI Technologies Inc Radeon R300 NE [Radeon
9500 Pro] (prog-if 00 [VGA])
Subsystem: ATI Technologies Inc Radeon R300 NE [Radeon 9500 Pro]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 255 (2000ns min), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at d000 [size=256]
Region 2: Memory at e5000000 (32-bit, non-prefetchable) [size=64K]
[virtual] Expansion ROM at e4000000 [disabled] [size=128K]
Capabilities: [58] AGP version 3.0
Status: RQ=256 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans-
64bit- FW+ AGP3+ Rate=x4,x8
Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP- GART64- 64bit- FW-
Rate=<none>
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
02:00.1 Display controller: ATI Technologies Inc Radeon R300 [Radeon 9500 Pro]
(Secondary)
Subsystem: ATI Technologies Inc Radeon R300 NE [Radeon 9500 Pro]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Region 0: Memory at d8000000 (32-bit, prefetchable) [disabled]
[size=128M]
Region 1: Memory at e5010000 (32-bit, non-prefetchable) [disabled]
[size=64K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Error message from /var/log/Xorg.0.log:
II) fglrx(0): Primary Controller - CRT on primary DAC
(II) fglrx(0): Internal Desktop Setting: 0x00000008
(II) fglrx(0): POWERplay not supported on this hardware
(EE) fglrx(0): === [swlDalHelperAddCustomizeMode] ===
CWDDEDI_DisplayGetSetModeTimingOverride failed: 7
(EE) fglrx(0): === [swlDalHelperAddCustomizeMode] ===
CWDDEDI_DisplayGetSetModeTimingOverride failed: 7
(EE) fglrx(0): === [swlDalHelperAddCustomizeMode] ===
CWDDEDI_DisplayGetSetModeTimingOverride failed: 7
Backtrace:
0: /usr/bin/X(xf86SigHandler+0x81) [0x80c5d91]
1: [0xffffe420]
2: /usr/lib/xorg/modules/drivers//fglrx_drv.so [0xb7567e5f]
3: /usr/lib/xorg/modules/drivers//fglrx_drv.so(DALCWDDE+0x1a2) [0xb75664a2]
4:
/usr/lib/xorg/modules/drivers//fglrx_drv.so(swlDalHelperAddCustomizeMode+0x1a4)
[0xb74fcd54]
5: /usr/lib/xorg/modules/drivers//fglrx_drv.so(atiddxPreInit+0xb7b) [0xb74d675b]
6: /usr/bin/X(InitOutput+0x9aa) [0x80a5b9a]
7: /usr/bin/X(main+0x27b) [0x807456b]
8: /lib/tls/i686/cmov/libc.so.6(__libc_start_main+0xdc) [0xb7d8cebc]
9: /usr/bin/X(FontFileCompleteXLFD+0x1e1) [0x8073ab1]
Fatal server error:
Caught signal 11. Server aborting
That's all, I can tell yo uright now, please tell me if you need more info!
Thanks for any help
Carsten
--
Feisty crashes at login screen after enabling the proprietay driver
https://launchpad.net/bugs/96652
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
