apport information ** Tags added: apport-collected
** Description changed: Installed Mythbuntu 10.04 Desktop i386 on to sata hard drive of the AMD64 machine and installed all updates. Everything worked just fine. After copying the installation to nfs server (followed document https://help.ubuntu.com/community/DisklessUbuntuHowto) then network booting failed resulting kernel panic. But if the sata drive isn't removed from the machine network boot works fine. lsb_release -rd server: Description: Ubuntu 10.04.1 LTS Release: 10.04 client: Description: Ubuntu 10.04.1 LTS Release: 10.04 uname -a: server: Linux XXX 2.6.32-25-generic #44-Ubuntu SMP Fri Sep 17 20:05:27 UTC 2010 x86_64 GNU/Linux client: Linux XXX 2.6.32-25-generic #44-Ubuntu SMP Fri Sep 17 20:26:08 UTC 2010 i686 GNU/Linux client (while hard drive attached): $ lspci -k 00:00.0 Memory controller: nVidia Corporation CK804 Memory Controller (rev a2) 00:01.0 ISA bridge: nVidia Corporation CK804 ISA Bridge (rev a2) 00:01.1 SMBus: nVidia Corporation CK804 SMBus (rev a2) Kernel driver in use: nForce2_smbus Kernel modules: i2c-nforce2 00:02.0 USB Controller: nVidia Corporation CK804 USB Controller (rev a2) Kernel driver in use: ohci_hcd 00:02.1 USB Controller: nVidia Corporation CK804 USB Controller (rev a2) Kernel driver in use: ehci_hcd 00:04.0 Multimedia audio controller: nVidia Corporation CK804 AC'97 Audio Controller (rev a2) Kernel driver in use: Intel ICH Kernel modules: snd-intel8x0 00:06.0 IDE interface: nVidia Corporation CK804 IDE (rev f2) Kernel driver in use: pata_amd Kernel modules: pata_amd 00:07.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev f2) Kernel driver in use: sata_nv Kernel modules: sata_nv 00:08.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev f2) Kernel driver in use: sata_nv Kernel modules: sata_nv 00:09.0 PCI bridge: nVidia Corporation CK804 PCI Bridge (rev a2) 00:0a.0 Bridge: nVidia Corporation CK804 Ethernet Controller (rev a2) Kernel driver in use: forcedeth Kernel modules: forcedeth 00:0b.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a2) Kernel driver in use: pcieport Kernel modules: shpchp 00:0c.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a2) Kernel driver in use: pcieport Kernel modules: shpchp 00:0d.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a2) Kernel driver in use: pcieport Kernel modules: shpchp 00:0e.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a2) Kernel driver in use: pcieport Kernel modules: shpchp 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control Kernel driver in use: k8temp Kernel modules: k8temp 01:0a.0 FireWire (IEEE 1394): Texas Instruments TSB82AA2 IEEE-1394b Link Layer Controller (rev 01) Kernel driver in use: ohci1394 Kernel modules: firewire-ohci, ohci1394 05:00.0 VGA compatible controller: nVidia Corporation G72 [GeForce 7300 SE/7200 GS] (rev a1) Kernel driver in use: nouveau Kernel modules: nvidiafb, nouveau + + --- + AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.21. + Architecture: i386 + AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/dsp', '/dev/snd/by-path', '/dev/snd/controlC0', '/dev/snd/pcmC0D0c', '/dev/snd/pcmC0D0p', '/dev/snd/pcmC0D1c', '/dev/snd/pcmC0D2p', '/dev/snd/seq', '/dev/snd/timer', '/dev/sequencer2', '/dev/sequencer'] failed with exit code 1: + CRDA: Error: [Errno 2] No such file or directory + Card0.Amixer.info: + Card hw:0 'CK804'/'NVidia CK804 with ALC850 at irq 22' + Mixer name : 'Realtek ALC850 rev 0' + Components : 'AC97a:414c4790' + Controls : 42 + Simple ctrls : 27 + DistroRelease: Ubuntu 10.04 + HibernationDevice: RESUME=UUID=06e241b1-953b-48fd-a9c7-475c189cb8eb + InstallationMedia: Mythbuntu 10.04 LTS "Lucid Lynx" - Release i386 (20100427.1) + IwConfig: + lo no wireless extensions. + + eth0 no wireless extensions. + Lsusb: + Bus 002 Device 003: ID 0bc7:0004 X10 Wireless Technology, Inc. X10 Receiver + Bus 002 Device 002: ID 046d:c218 Logitech, Inc. Logitech RumblePad 2 USB + Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub + Bus 001 Device 002: ID 152d:2338 JMicron Technology Corp. / JMicron USA Technology Corp. JM20337 Hi-Speed USB to SATA & PATA Combo Bridge + Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub + Package: linux (not installed) + ProcCmdLine: root=/dev/nfs initrd=Ubuntu-Lucid-Lynx-i386/initrd.img-2.6.32-25-generic nfsroot=10.11.12.2:/home/nohdboot/Ubuntu-Lucid-Lynx-i386 ip=dhcp rw BOOT_IMAGE=Ubuntu-Lucid-Lynx-i386/vmlinuz-2.6.32-25-generic auto + ProcEnviron: + LANG=en_US.UTF-8 + SHELL=/bin/bash + ProcVersionSignature: Ubuntu 2.6.32-25.44-generic 2.6.32.21+drm33.7 + Regression: Yes + RelatedPackageVersions: linux-firmware 1.34.1 + Reproducible: Yes + RfKill: + + Tags: lucid regression-update needs-upstream-testing + Uname: Linux 2.6.32-25-generic i686 + UserGroups: adm admin cdrom dialout lpadmin mythtv plugdev sambashare video + dmi.bios.date: 01/13/2006 + dmi.bios.vendor: Award Software International, Inc. + dmi.bios.version: F2 + dmi.board.name: NF-CK804 + dmi.board.vendor: Gigabyte Technology Co., Ltd. + dmi.board.version: x.x + dmi.chassis.type: 3 + dmi.modalias: dmi:bvnAwardSoftwareInternational,Inc.:bvrF2:bd01/13/2006:svn:pn:pvr:rvnGigabyteTechnologyCo.,Ltd.:rnNF-CK804:rvrx.x:cvn:ct3:cvr: ** Attachment added: "AlsaDevices.txt" https://bugs.edge.launchpad.net/bugs/657418/+attachment/1692033/+files/AlsaDevices.txt -- Kernel panic - not syncing: Attempted to kill init! https://bugs.launchpad.net/bugs/657418 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
