All the blocks are correct and required, as they represent domains that constantly attack my systems, the only typo I has was 2222 UDP which should have been 2222 TCP.
Only 2222 TCP is required on this computer as this is my host, not running the web server. I have not upgraded my VM which is my server that needs 22 and 443 TCP open to 10.04 yet because of all the problems I was having with UFW blocking all traffic out even with default allow in and out rules, the rules are the same for both the host and server with the exception of 443 and 22 on the server on only 2222 on the host. Some times UFW would work on my 10.04 host after a kernel update then I would stop after another, I don't know what caused it, but a full removal and reinstall of UFW seems to have corrected the issue for now. I have seen others have similar issues on-line, with many possible solutions that failed for both them and me, I just on a last resort effort, except waiting to try Ubuntu 10.10, tried a removal and reinstall of UFW, and so far so good. Thanks for looking into this however. > Date: Fri, 8 Oct 2010 18:02:01 +0000 > From: ja...@ubuntu.com > To: slade...@hotmail.com > Subject: [Bug 650620] Re: UFW blocks internet after kernal update. > > Not having /var/lib/ufw is fine. > > You have a lot of deny rules in your /lib/ufw/user.rules file and they are > not at all what you said you added. I suggest doing: > $ sudo ufw reset > $ sudo ufw allow 443/tcp > $ sudo ufw limit 22/tcp > $ sudo ufw enable > > The reset command will backup your files for you. All you other files > look otherwise fine. > > -- > UFW blocks internet after kernal update. > https://bugs.launchpad.net/bugs/650620 > You received this bug notification because you are a direct subscriber > of the bug. > > Status in “ufw” package in Ubuntu: Invalid > > Bug description: > Configuration I have a cable modem connected to a router with my computer > connected to the router, and my IP is statically set. > > With Ubuntu 9.04 and UFW I used a "default deny," I then setup "22 limit > anywhere" and 443/tcp allow anywhere" this worked great and let me browse out > to the internet and only have incoming traffic to 22 and 443. > > However with Ubuntu 10.04 I am having major problems, I have it setup this > way: > > With Ubuntu 10.04 I use "default deny in" and "default allow out." I then > setup "443/tcp allow in anywhere" and "22 limit in anywhere" with this setup > I can't even browse the web; "http://ubuntuforums.org"; times out for example. > The only way I can browse the web is to disable UFW completely. I even tried > setting UFW with "allow" as default for both "in" and "out" but this also > causes the web not to work. > > Any suggestions? > > Well, after getting kernel update and rebooting yesterday, UFW now blocks my > outgoing internet traffic again. Had to disable it to get out. > > To unsubscribe from this bug, go to: > https://bugs.launchpad.net/ubuntu/+source/ufw/+bug/650620/+subscribe -- UFW blocks internet after kernal update. https://bugs.launchpad.net/bugs/650620 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
