This bug was fixed in the package linux-mvl-dove - 2.6.32-409.25
---------------
linux-mvl-dove (2.6.32-409.25) maverick; urgency=low
[ Stefan Bader ]
* Rebased to 2.6.32-24.42
[ Eric Miao ]
* Sync config with Dove LSP 5.3.2
- LP: #611634
[ Upstream Kernel Changes ]
* Revert "erratum of VLDR instruction bug in Thumb-2 mode"
- LP: #611634
* KG2: Add input/output timing auto-configuration functions (daemon
required)
- LP: #611634
* AV-D1 X0 EC key driver
- LP: #611634
* move VGA EDID to i2c bus 1 (avd1r2 ECN6)
- LP: #611634
* dove: add some drivers and code dependency on MV_HAL_DRIVERS_SUPPORT
- LP: #611634
* Hwmon: Add support for setting the Overheat and Overcool temperature
thresholds.
- LP: #611634
* chromium : enable CONFIG_SECURITY_FILE_CAPABILITIES in dove_defconfig
- LP: #611634
* chromium : enable CONFIG_BLK_DEV_DM and CONFIG_DM_CRYPT to let
cryptohome work
- LP: #611634
* pmu: reduce code to make it fit into sram
- LP: #611634
* refine the mechanism for multiple lcd controller to store color key
related registers when suspending.
- LP: #611634
* Support for command-line tool: kg2cfg
- LP: #611634
* ANX7150: Fix screen displays on and off several times for some HDMI TVs
- LP: #611634
* Hide AD9889 debug message
- LP: #611634
* usb: fix issue when USB host ask for string descriptor and USB device
answer with exact 128 bytes.
- LP: #611634
* dove: add support for the temporary DB-88AP510-BP-B board
- LP: #611634
* dove: add support for mpp modes used by DB-88AP510-BP-B board
- LP: #611634
* sound: added codec driver for ALC655
- LP: #611634
* sound: cleaned compilation warning in dove avengers ac97
- LP: #611634
* sound: add board support for AC97 driver for dove-db-b board
- LP: #611634
* mv_sata: fix bug in the scsi translation layer
- LP: #611634
* mvSata: add support for KW2 sata
- LP: #611634
* Exernal VGA clock for Dove DB
- LP: #611634
* NAND: Driver reorganization and support for new 24bit ECC devices
- LP: #611634
* NAND: change read delay from absolut to RnB based
- LP: #611634
* VMETA PM function: add a wait queue for syncing the vmeta
suspend/resume
- LP: #611634
* dove: enable the new nand driver
- LP: #611634
* dove: fix power management support for new db board
- LP: #611634
* galcore: sync with gc600_driver
- LP: #611634
* dove: add LFE and Surround dai to dove db-b
- LP: #611634
* convert idt clock generator to i2c platform driver
- LP: #611634
* dove giga: add wake on lan support
- LP: #611634
* dove: set gpio #1 to 1 to driver the giga phy reset
- LP: #611634
* dove: fix build issue in clock.h
- LP: #611634
* dove: add clk_dev insterface to the idt clock generator
- LP: #611634
* dove: enable the idt clock generator driver
- LP: #611634
* dove LCD: add support for using external clk reference for A0
- LP: #611634
* remove unused code
- LP: #611634
* avoid phy reset on resume when wol enabled
- LP: #611634
* dove: fix SPI flash model and size found on db board
- LP: #611634
* dove: fix typo in dove-db mpp's description
- LP: #611634
* dove: fix sdio workaround to config all sd gpio's as input
- LP: #611634
* sdhci-mv: fix bug when that caused to toggle the wrong bit in the
function select register
- LP: #611634
* NAND: PIO support for naked symantics
- LP: #611634
* NAND: changes to adapt to Uboot driver
- LP: #611634
* NAND: Bus timing optimizations for the Samsung K9HBG08U1A
- LP: #611634
* dove sound: enable surround and center outputs on Realtek 655 codec for
any channels number
- LP: #611634
* fix out of memory problem when playing moives and enter display blank
mode.
- LP: #611634
* fix EDID issue: LCD0 get edid from I2C 0x3f, LCD1 from I2C 0x50.
(support E-EDID feature)
- LP: #611634
* remove unwanted space.
- LP: #611634
* Add dynamic detect monitor connection and get EDID information.
- LP: #611634
* add fake EDID for LCD panel on LCD0
- LP: #611634
* dove: update debugger reset/unreset code in deepidle code for Dove-A0
- LP: #611634
* dove sound: disble debug mode in RealTek 655 codec
- LP: #611634
* video: enable building the adi9889 display driver as module
- LP: #611634
* video: make the adi9889 detect i2c client (edid or ) using driver_data
instead of i2c address
- LP: #611634
* dove: add the adi9889 i2c device to dove db board
- LP: #611634
* dove db: support for adi9889 HDMI to DVI module
- LP: #611634
* video: add ths display driver
- LP: #611634
* dove db: add ths8200 and board parameter for the LCD2DVI module
- LP: #611634
* galcore: sync Makefile
- LP: #611634
* bmm : sync with bmm-lib
- LP: #611634
* idt clock: add error messages
- LP: #611634
* idt clock: add sysfs file for each output clock
- LP: #611634
* adi9889 display: enable 1080i mode
- LP: #611634
* dove: add support for 88AP510 rev A0
- LP: #611634
* idt clock: use i2c messages for reading
- LP: #611634
* idt clock: configure the Loop filter
- LP: #611634
* dove pm: fix build error when mv6xxx i2c expander disabled
- LP: #611634
* idt clock: disable pll's by default
- LP: #611634
* dovefb: disable external clock when entering blank mode
- LP: #611634
* dove: support using external lcd clocks for dove db
- LP: #611634
* mtd nand: fix bug in orion_nfs_hal when addressing orion_nfc_info
structure
- LP: #611634
* dove: fix bug in clk setting from command line
- LP: #611634
* dove: enable co-processor dual issue mode for Dove rev. A0
- LP: #611634
* tools: add tool for reading/writing ethernet phy registers
- LP: #611634
* erratum of VLDR instruction bug in Thumb-2 mode. The workaround should
not affect by the setting of ai_usermode.
- LP: #611634
* Staging: android: binder: Create dedicated workqueue for binder
deferred work
- LP: #611634
* dove: skip VLDR Thumb errara workaround for the cpu revisions where
that bug is fixed
- LP: #611634
* DOVE PM: Deep-Idle debugger reset fix in A0
- LP: #611634
* dove: enable DeepIdle feature by default
- LP: #611634
* dove: make the LCD clk settings depend on A0 revision of the chip
- LP: #611634
* dove: the DB revision B board have the same ID is DB rev A boards
- LP: #611634
* dove: fixed bug in the PMU interrupts handler when clearing the cause
register
- LP: #611634
* adi display: keep the default edid address
- LP: #611634
* dove: set the edid information for all machines
- LP: #611634
* GC600: Fix bug that cause to crash when doing hibernate Driver tries to
enable clock gating during GPU hardware initialization. CPU needs to
stall a little time to wait for GPU ready
- LP: #611634
* Dove PM: invalidate L2 entry that get filled due to temporary mapping
- LP: #611634
* dove: use read modify write when updating the Auxiliary Funcion modes
register
- LP: #611634
* dove: print the value of Auxiliary Functional Modes Control
- LP: #611634
* dove: use marvell toolchain for building the tools
- LP: #611634
* dove: update support for the SB videoplug board
- LP: #611634
[ Ubuntu: 2.6.32-24.42 ]
* (pre-stable) drm/i915: add PANEL_UNLOCK_REGS definition
- LP: #561802, #578673
* (pre-stable) drm/i915: make sure eDP panel is turned on
- LP: #578673
* (pre-stable) drm/i915: make sure we shut off the panel in eDP configs
- LP: #578673
-- Stefan Bader <stefan.ba...@canonical.com> Fri, 20 Aug 2010 16:16:39 +0200
** Changed in: linux-mvl-dove (Ubuntu)
Status: New => Fix Released
--
[dove] BSP update for LSP 5.3.2
https://bugs.launchpad.net/bugs/611634
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
