I have a Nvidia card and the symptoms are the same als in the original post.
My output of krandrtray is the following. Note that in unsuccessful attempts
the changes are immideately reverted
This comes when starting:
display-randr(1869)/kdecore (services)
KServiceFactory::findServiceByDesktopPath: "randr" not found
display-randr(1869) RandRDisplay::RandRDisplay: Using XRANDR extension 1.2 or
greater.
display-randr(1869) RandRDisplay::RandRDisplay: XRANDR error base: 176
display-randr(1869) RandRScreen::loadSettings: Creating CRTC object for XID 0
("None")
display-randr(1869) RandRScreen::loadSettings: Creating CRTC object for XID 356
display-randr(1869) RandRCrtc::loadSettings: Querying information about CRTC 356
display-randr(1869) RandRScreen::loadSettings: Creating output object for XID
357
display-randr(1869) RandROutput::queryOutputInfo: XID 357 is output "default"
(connected)
display-randr(1869) RandROutput::setCrtc: Setting CRTC 356 (enabled) on output
"default"
display-randr(1869) RandROutput::queryOutputInfo: Possible CRTCs for output
"default" :
display-randr(1869) RandROutput::queryOutputInfo: - CRTC 356
display-randr(1869) RandROutput::queryOutputInfo: Current configuration for
output "default" :
display-randr(1869) RandROutput::queryOutputInfo: - Refresh rate: 50
display-randr(1869) RandROutput::queryOutputInfo: - Rect: QRect(0,0
1600x1200)
display-randr(1869) RandROutput::queryOutputInfo: - Rotation: 1
display-randr(1869)/kdecore (services)
KServiceFactory::findServiceByDesktopPath: "nvidiadisplay" not found
display-randr(1869)/kdecore (services)
KServiceFactory::findServiceByDesktopPath: "nvidia3d" not found
display-randr(1869)/kdecore (services)
KServiceFactory::findServiceByDesktopPath: "kgamma" not found
display-randr(1869)/kdecore (services)
KServiceFactory::findServiceByDesktopPath: "energy" not found
display-randr(1869) KRandRModule::load: Loading KRandRModule...
display-randr(1869) OutputConfig::load: Loading output configuration for
"default"
display-randr(1869) RandRConfig::load: Output rect: QRect(0,0 1600x1200)
display-randr(1869) KRandRModule::load: Loading KRandRModule...
display-randr(1869) OutputConfig::load: Loading output configuration for
"default"
display-randr(1869) RandRConfig::load: Output rect: QRect(0,0 1600x1200)
display-randr(1869) KRandRModule::load: Loading KRandRModule...
display-randr(1869) OutputConfig::load: Loading output configuration for
"default"
display-randr(1869) RandRConfig::load: Output rect: QRect(0,0 1600x1200)
Rotating upside-down (successfully):
display-randr(1869) RandRConfig::apply: Applying settings...
display-randr(1869) RandRConfig::apply: Normalizing positions by QPoint(0,0)
display-randr(1869) RandRConfig::apply: Output config for "default" :
rect = QRect(0,0 1600x1200) , rot = 4 , rate = 50
display-randr(1869) RandROutput::setCrtc: Setting CRTC 0 (disabled) on output
"default"
display-randr(1869) RandROutput::slotEnable: Attempting to enable "default"
display-randr(1869) RandROutput::setCrtc: Setting CRTC 356 (enabled) on output
"default"
display-randr(1869) RandRScreen::applyProposed: Applying proposed changes for
screen 0 ...
display-randr(1869) RandROutput::applyProposed: Applying proposed changes for
output "default" ...
display-randr(1869) RandROutput::tryCrtc: Trying to change output "default" to
CRTC 356 ...
display-randr(1869) RandRCrtc::applyProposed: Applying proposed changes for
CRTC 356 ...
display-randr(1869) RandRCrtc::applyProposed: Current Screen rect:
QRect(0,0 1600x1200)
display-randr(1869) RandRCrtc::applyProposed: Current CRTC rect:
QRect(0,0 1600x1200)
display-randr(1869) RandRCrtc::applyProposed: Current rotation: 1
display-randr(1869) RandRCrtc::applyProposed: Proposed CRTC rect:
QRect(0,0 1600x1200)
display-randr(1869) RandRCrtc::applyProposed: Proposed rotation: 4
display-randr(1869) RandRCrtc::applyProposed: Proposed refresh rate: 50
display-randr(1869) RandRCrtc::applyProposed: Enabled outputs:
display-randr(1869) RandRCrtc::applyProposed: - "default"
display-randr(1869) RandRCrtc::applyProposed: Changes for CRTC 356 successfully
applied.
display-randr(1869) OutputConfig::outputChanged: Output "default" changed. (
mask = "4" )
display-randr(1869) OutputConfig::outputChanged: Output mode changed.
display-randr(1869) RandROutput::tryCrtc: Changed output "default" to CRTC 356
display-randr(1869) RandROutput::tryCrtc: ( from old CRTC 356 )
display-randr(1869) RandRScreen::applyProposed: Changes have been applied to
all outputs.
display-randr(1869) RandRCrtc::handleEvent: [CRTC] Event...
display-randr(1869) RandRCrtc::handleEvent: Changed rotation: 4
Cancelling changes:
display-randr(1869) RandRScreen::applyProposed: Changes canceled, reverting to
original setup.
display-randr(1869) RandROutput::applyProposed: Applying proposed changes for
output "default" ...
display-randr(1869) RandROutput::tryCrtc: Trying to change output "default" to
CRTC 356 ...
display-randr(1869) RandRCrtc::applyProposed: Applying proposed changes for
CRTC 356 ...
display-randr(1869) RandRCrtc::applyProposed: Current Screen rect:
QRect(0,0 1600x1200)
display-randr(1869) RandRCrtc::applyProposed: Current CRTC rect:
QRect(0,0 1600x1200)
display-randr(1869) RandRCrtc::applyProposed: Current rotation: 4
display-randr(1869) RandRCrtc::applyProposed: Proposed CRTC rect:
QRect(0,0 1600x1200)
display-randr(1869) RandRCrtc::applyProposed: Proposed rotation: 1
display-randr(1869) RandRCrtc::applyProposed: Proposed refresh rate: 50
display-randr(1869) RandRCrtc::applyProposed: Enabled outputs:
display-randr(1869) RandRCrtc::applyProposed: - "default"
display-randr(1869) RandRCrtc::applyProposed: Changes for CRTC 356 successfully
applied.
display-randr(1869) OutputConfig::outputChanged: Output "default" changed. (
mask = "4" )
display-randr(1869) OutputConfig::outputChanged: Output mode changed.
display-randr(1869) RandROutput::tryCrtc: Changed output "default" to CRTC 356
display-randr(1869) RandROutput::tryCrtc: ( from old CRTC 356 )
display-randr(1869) RandRCrtc::handleEvent: [CRTC] Event...
display-randr(1869) RandRCrtc::handleEvent: Changed rotation: 1
Rotating right (without success):
display-randr(1869) RandRConfig::apply: Applying settings...
display-randr(1869) RandRConfig::apply: Normalizing positions by QPoint(0,0)
display-randr(1869) RandRConfig::apply: Output config for "default" :
rect = QRect(0,0 1600x1200) , rot = 8 , rate = 50
display-randr(1869) RandROutput::setCrtc: Setting CRTC 0 (disabled) on output
"default"
display-randr(1869) RandROutput::slotEnable: Attempting to enable "default"
display-randr(1869) RandROutput::setCrtc: Setting CRTC 356 (enabled) on output
"default"
display-randr(1869) RandRScreen::applyProposed: Applying proposed changes for
screen 0 ...
display-randr(1869) RandROutput::applyProposed: Applying proposed changes for
output "default" ...
display-randr(1869) RandROutput::tryCrtc: Trying to change output "default" to
CRTC 356 ...
display-randr(1869) RandRCrtc::applyProposed: Applying proposed changes for
CRTC 356 ...
display-randr(1869) RandRCrtc::applyProposed: Current Screen rect:
QRect(0,0 1600x1200)
display-randr(1869) RandRCrtc::applyProposed: Current CRTC rect:
QRect(0,0 1600x1200)
display-randr(1869) RandRCrtc::applyProposed: Current rotation: 1
display-randr(1869) RandRCrtc::applyProposed: Proposed CRTC rect:
QRect(0,0 1600x1200)
display-randr(1869) RandRCrtc::applyProposed: Proposed rotation: 8
display-randr(1869) RandRCrtc::applyProposed: Proposed refresh rate: 50
display-randr(1869) RandRCrtc::applyProposed: Enabled outputs:
display-randr(1869) RandRCrtc::applyProposed: - "default"
display-randr(1869) RandRCrtc::applyProposed: Applying proposed changes for
CRTC 356 ...
display-randr(1869) RandRCrtc::applyProposed: Current Screen rect:
QRect(0,0 1600x1200)
display-randr(1869) RandRCrtc::applyProposed: Current CRTC rect:
QRect(0,0 1600x1200)
display-randr(1869) RandRCrtc::applyProposed: Current rotation: 1
display-randr(1869) RandRCrtc::applyProposed: Proposed CRTC rect:
QRect(0,0 1600x1200)
display-randr(1869) RandRCrtc::applyProposed: Proposed rotation: 1
display-randr(1869) RandRCrtc::applyProposed: Proposed refresh rate: 50
display-randr(1869) RandRCrtc::applyProposed: Enabled outputs:
display-randr(1869) RandRCrtc::applyProposed: - "default"
display-randr(1869) RandRCrtc::applyProposed: Changes for CRTC 356 successfully
applied.
display-randr(1869) OutputConfig::outputChanged: Output "default" changed. (
mask = "4" )
display-randr(1869) OutputConfig::outputChanged: Output mode changed.
display-randr(1869) RandROutput::tryCrtc: Failed to change output "default" to
CRTC 356
display-randr(1869) RandROutput::tryCrtc: Switching back to old CRTC 356
display-randr(1869) RandRScreen::applyProposed: Changes have been applied to
all outputs.
display-randr(1869) RandRScreen::applyProposed: Changes canceled, reverting to
original setup.
Rotating left (without success):
display-randr(1869) RandRConfig::apply: Applying settings...
display-randr(1869) RandRConfig::apply: Normalizing positions by QPoint(0,0)
display-randr(1869) RandRConfig::apply: Output config for "default" :
rect = QRect(0,0 1600x1200) , rot = 2 , rate = 50
display-randr(1869) RandROutput::setCrtc: Setting CRTC 0 (disabled) on output
"default"
display-randr(1869) RandROutput::slotEnable: Attempting to enable "default"
display-randr(1869) RandROutput::setCrtc: Setting CRTC 356 (enabled) on output
"default"
display-randr(1869) RandRScreen::applyProposed: Applying proposed changes for
screen 0 ...
display-randr(1869) RandROutput::applyProposed: Applying proposed changes for
output "default" ...
display-randr(1869) RandROutput::tryCrtc: Trying to change output "default" to
CRTC 356 ...
display-randr(1869) RandRCrtc::applyProposed: Applying proposed changes for
CRTC 356 ...
display-randr(1869) RandRCrtc::applyProposed: Current Screen rect:
QRect(0,0 1600x1200)
display-randr(1869) RandRCrtc::applyProposed: Current CRTC rect:
QRect(0,0 1600x1200)
display-randr(1869) RandRCrtc::applyProposed: Current rotation: 1
display-randr(1869) RandRCrtc::applyProposed: Proposed CRTC rect:
QRect(0,0 1600x1200)
display-randr(1869) RandRCrtc::applyProposed: Proposed rotation: 2
display-randr(1869) RandRCrtc::applyProposed: Proposed refresh rate: 50
display-randr(1869) RandRCrtc::applyProposed: Enabled outputs:
display-randr(1869) RandRCrtc::applyProposed: - "default"
display-randr(1869) RandRCrtc::applyProposed: Applying proposed changes for
CRTC 356 ...
display-randr(1869) RandRCrtc::applyProposed: Current Screen rect:
QRect(0,0 1600x1200)
display-randr(1869) RandRCrtc::applyProposed: Current CRTC rect:
QRect(0,0 1600x1200)
display-randr(1869) RandRCrtc::applyProposed: Current rotation: 1
display-randr(1869) RandRCrtc::applyProposed: Proposed CRTC rect:
QRect(0,0 1600x1200)
display-randr(1869) RandRCrtc::applyProposed: Proposed rotation: 1
display-randr(1869) RandRCrtc::applyProposed: Proposed refresh rate: 50
display-randr(1869) RandRCrtc::applyProposed: Enabled outputs:
display-randr(1869) RandRCrtc::applyProposed: - "default"
display-randr(1869) RandRCrtc::applyProposed: Changes for CRTC 356 successfully
applied.
display-randr(1869) OutputConfig::outputChanged: Output "default" changed. (
mask = "4" )
display-randr(1869) OutputConfig::outputChanged: Output mode changed.
display-randr(1869) RandROutput::tryCrtc: Failed to change output "default" to
CRTC 356
display-randr(1869) RandROutput::tryCrtc: Switching back to old CRTC 356
display-randr(1869) RandRScreen::applyProposed: Changes have been applied to
all outputs.
display-randr(1869) RandRScreen::applyProposed: Changes canceled, reverting to
original setup.
** Changed in: kdebase-workspace (Ubuntu)
Status: Invalid => New
--
krandrtray can't rotate screen
https://bugs.launchpad.net/bugs/432756
You received this bug notification because you are a member of Kubuntu
Bugs, which is subscribed to kdebase-workspace in ubuntu.
--
kubuntu-bugs mailing list
kubuntu-b...@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/kubuntu-bugs
