apport information
** Tags added: apport-collected
** Description changed:
After a boot, my system idles at system temp=29C, CPU temp=31C according
to gkrellm. If I do a sleep then resume, the CPU temp stays above 36C at
idle. All desktop effects are disabled.
Description: Ubuntu lucid (development branch)
Release: 10.04
AMD X4 965
top - 01:56:09 up 14 min, 1 user, load average: 0.44, 0.40, 0.28
Tasks: 211 total, 2 running, 207 sleeping, 0 stopped, 2 zombie
Cpu(s): 0.4%us, 0.2%sy, 0.2%ni, 99.2%id, 0.1%wa, 0.0%hi, 0.0%si, 0.0%st
Mem: 1930052k total, 879512k used, 1050540k free, 29908k buffers
Swap: 9438148k total, 0k used, 9438148k free, 427700k cached
cpufrequtils 006: cpufreq-info (C) Dominik Brodowski 2004-2009
Report errors and bugs to cpuf...@vger.kernel.org, please.
analyzing CPU 0:
driver: powernow-k8
CPUs which run at the same hardware frequency: 0
CPUs which need to have their frequency coordinated by software: 0
maximum transition latency: 8.0 us.
hardware limits: 800 MHz - 3.40 GHz
available frequency steps: 3.40 GHz, 2.70 GHz, 2.20 GHz, 800 MHz
available cpufreq governors: conservative, ondemand, userspace, powersave,
performance
current policy: frequency should be within 800 MHz and 3.40 GHz.
The governor "ondemand" may decide which speed to use
within this range.
current CPU frequency is 800 MHz.
cpufreq stats: 3.40 GHz:3.42%, 2.70 GHz:0.08%, 2.20 GHz:0.83%, 800
MHz:95.67% (1230)
analyzing CPU 1:
driver: powernow-k8
CPUs which run at the same hardware frequency: 1
CPUs which need to have their frequency coordinated by software: 1
maximum transition latency: 8.0 us.
hardware limits: 800 MHz - 3.40 GHz
available frequency steps: 3.40 GHz, 2.70 GHz, 2.20 GHz, 800 MHz
available cpufreq governors: conservative, ondemand, userspace, powersave,
performance
current policy: frequency should be within 800 MHz and 3.40 GHz.
The governor "ondemand" may decide which speed to use
within this range.
current CPU frequency is 800 MHz.
cpufreq stats: 3.40 GHz:2.93%, 2.70 GHz:0.12%, 2.20 GHz:0.97%, 800
MHz:95.98% (774)
analyzing CPU 2:
driver: powernow-k8
CPUs which run at the same hardware frequency: 2
CPUs which need to have their frequency coordinated by software: 2
maximum transition latency: 8.0 us.
hardware limits: 800 MHz - 3.40 GHz
available frequency steps: 3.40 GHz, 2.70 GHz, 2.20 GHz, 800 MHz
available cpufreq governors: conservative, ondemand, userspace, powersave,
performance
current policy: frequency should be within 800 MHz and 3.40 GHz.
The governor "ondemand" may decide which speed to use
within this range.
current CPU frequency is 800 MHz.
cpufreq stats: 3.40 GHz:2.67%, 2.70 GHz:0.09%, 2.20 GHz:0.85%, 800
MHz:96.39% (593)
analyzing CPU 3:
driver: powernow-k8
CPUs which run at the same hardware frequency: 3
CPUs which need to have their frequency coordinated by software: 3
maximum transition latency: 8.0 us.
hardware limits: 800 MHz - 3.40 GHz
available frequency steps: 3.40 GHz, 2.70 GHz, 2.20 GHz, 800 MHz
available cpufreq governors: conservative, ondemand, userspace, powersave,
performance
current policy: frequency should be within 800 MHz and 3.40 GHz.
The governor "ondemand" may decide which speed to use
within this range.
current CPU frequency is 800 MHz.
cpufreq stats: 3.40 GHz:3.90%, 2.70 GHz:0.04%, 2.20 GHz:1.06%, 800
MHz:95.00% (666)
+ ---
+ AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.21.
+ Architecture: i386
+ AudioDevicesInUse:
+ USER PID ACCESS COMMAND
+ /dev/snd/controlC0: ubuntu 3185 F.... pulseaudio
+ CRDA: Error: [Errno 2] No such file or directory
+ Card0.Amixer.info:
+ Card hw:0 'SB'/'HDA ATI SB at 0xfe024000 irq 16'
+ Mixer name : 'Realtek ALC889A'
+ Components : 'HDA:10ec0885,1458a102,00100101'
+ Controls : 43
+ Simple ctrls : 24
+ Card1.Amixer.info:
+ Card hw:1 'HDMI'/'HDA ATI HDMI at 0xfdffc000 irq 19'
+ Mixer name : 'ATI RS690/780 HDMI'
+ Components : 'HDA:1002791a,00791a00,00100000'
+ Controls : 4
+ Simple ctrls : 1
+ Card1.Amixer.values:
+ Simple mixer control 'IEC958',0
+ Capabilities: pswitch pswitch-joined penum
+ Playback channels: Mono
+ Mono: Playback [off]
+ DistroRelease: Ubuntu 10.04
+ IwConfig:
+ lo no wireless extensions.
+
+ eth0 no wireless extensions.
+ LiveMediaBuild: Ubuntu 10.04 LTS "Lucid Lynx" - Release i386 (20100427.1)
+ MachineType: Gigabyte Technology Co., Ltd. GA-MA785GM-US2H
+ Package: linux (not installed)
+ ProcCmdLine: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/hostname.seed
boot=casper initrd=/casper/initrd.lz quiet splash -- maybe-ubiquity
+ ProcEnviron:
+ PATH=(custom, no user)
+ LANG=en_US.UTF-8
+ SHELL=/bin/bash
+ ProcVersionSignature: Ubuntu 2.6.32-21.32-generic 2.6.32.11+drm33.2
+ Regression: No
+ RelatedPackageVersions: linux-firmware 1.34
+ Reproducible: Yes
+ RfKill:
+
+ Tags: lucid suspend resume needs-upstream-testing
+ Uname: Linux 2.6.32-21-generic i686
+ UserGroups:
+
+ dmi.bios.date: 09/16/2009
+ dmi.bios.vendor: Award Software International, Inc.
+ dmi.bios.version: F5
+ dmi.board.name: GA-MA785GM-US2H
+ dmi.board.vendor: Gigabyte Technology Co., Ltd.
+ dmi.chassis.type: 3
+ dmi.chassis.vendor: Gigabyte Technology Co., Ltd.
+ dmi.modalias:
dmi:bvnAwardSoftwareInternational,Inc.:bvrF5:bd09/16/2009:svnGigabyteTechnologyCo.,Ltd.:pnGA-MA785GM-US2H:pvr:rvnGigabyteTechnologyCo.,Ltd.:rnGA-MA785GM-US2H:rvr:cvnGigabyteTechnologyCo.,Ltd.:ct3:cvr:
+ dmi.product.name: GA-MA785GM-US2H
+ dmi.sys.vendor: Gigabyte Technology Co., Ltd.
** Attachment added: "AlsaDevices.txt"
http://launchpadlibrarian.net/46980883/AlsaDevices.txt
--
CPU temperature rises after resume from sleep in Kubuntu
https://bugs.launchpad.net/bugs/568503
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
