apport information ** Tags added: apport-collected
** Description changed: This bug was originally filed against Ubuntu 8.10, but seems to still be present in 10.04 (Beta 1, kernel 2.6.32-18-generic). I have for testing a Hauppauge HVR-900 USB based terrestrial TV card. It is reported to work with the em28xx driver, all that is needed is the firmware that I originally had to extract manually: http://www.mythtv.co.nz/mythtv/2008/11/16/hauppauge-hvr-900-tuner-and-ubuntu-810/ Today the required firmware is included in the package linux-firmware- nonfree which can be installed directly from the repositories. The problem is that while the card is detected and modules/firmware loaded the files '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' do not appear. Without these files viewing any broadcasts is impossible. lsusb | grep Hauppauge: Bus 005 Device 004: ID 2040:6502 Hauppauge WinTV HVR-900 sudo tail -f /var/log/messages when inserting the tuner into a USB port: [ 1378.728075] usb 1-3: new high speed USB device using ehci_hcd and address 5 [ 1378.866848] usb 1-3: configuration #1 chosen from 1 choice [ 1378.901423] em28xx: New device WinTV HVR-900 @ 480 Mbps (2040:6502, interface 0, class 0) [ 1378.901611] em28xx #0: chip ID is em2882/em2883 [ 1379.077879] em28xx #0: i2c eeprom 00: 1a eb 67 95 40 20 02 65 d0 12 5c 03 82 1e 6a 18 [ 1379.077914] em28xx #0: i2c eeprom 10: 00 00 24 57 66 07 01 00 00 00 00 00 00 00 00 00 [ 1379.077945] em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 02 00 b8 00 00 00 5b e0 00 00 [ 1379.077976] em28xx #0: i2c eeprom 30: 00 00 20 40 20 6e 02 20 10 01 01 01 00 00 00 00 [ 1379.078007] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 1379.078038] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 1379.078069] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 18 03 34 00 30 00 [ 1379.078100] em28xx #0: i2c eeprom 70: 32 00 37 00 38 00 31 00 39 00 33 00 31 00 38 00 [ 1379.078131] em28xx #0: i2c eeprom 80: 00 00 1e 03 57 00 69 00 6e 00 54 00 56 00 20 00 [ 1379.078162] em28xx #0: i2c eeprom 90: 48 00 56 00 52 00 2d 00 39 00 30 00 30 00 00 00 [ 1379.078193] em28xx #0: i2c eeprom a0: 84 12 00 00 05 50 1a 7f d4 78 23 fa fd d0 28 89 [ 1379.078224] em28xx #0: i2c eeprom b0: ff 00 00 00 04 84 0a 00 01 01 20 77 00 40 36 a5 [ 1379.078255] em28xx #0: i2c eeprom c0: 13 f0 74 02 01 00 01 79 5c 00 00 00 00 00 00 00 [ 1379.078287] em28xx #0: i2c eeprom d0: 84 12 00 00 05 50 1a 7f d4 78 23 fa fd d0 28 89 [ 1379.078318] em28xx #0: i2c eeprom e0: ff 00 00 00 04 84 0a 00 01 01 20 77 00 40 36 a5 [ 1379.078349] em28xx #0: i2c eeprom f0: 13 f0 74 02 01 00 01 79 5c 00 00 00 00 00 00 00 [ 1379.078385] em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0x58673bdd [ 1379.078392] em28xx #0: EEPROM info: [ 1379.078398] em28xx #0: AC97 audio (5 sample rates) [ 1379.078403] em28xx #0: 500mA max power [ 1379.078411] em28xx #0: Table at 0x24, strings=0x1e82, 0x186a, 0x0000 [ 1379.079114] em28xx #0: Identified as Hauppauge WinTV HVR 900 (R2) (card=18) [ 1379.085953] tveeprom 2-0050: Hauppauge model 65018, rev B2C0, serial# 1287478 [ 1379.085966] tveeprom 2-0050: tuner model is Xceive XC3028 (idx 120, type 71) [ 1379.085978] tveeprom 2-0050: TV standards PAL(B/G) PAL(I) PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xd4) [ 1379.085989] tveeprom 2-0050: audio processor is None (idx 0) [ 1379.085997] tveeprom 2-0050: has radio [ 1379.089772] tvp5150 2-005c: chip found @ 0xb8 (em28xx #0) [ 1379.096058] tuner 2-0061: chip found @ 0xc2 (em28xx #0) [ 1379.096216] xc2028 2-0061: creating new instance [ 1379.096220] xc2028 2-0061: type set to XCeive xc2028/xc3028 tuner [ 1379.096232] usb 1-3: firmware: requesting xc3028-v27.fw [ 1379.099238] xc2028 2-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7 [ 1379.144051] xc2028 2-0061: Loading firmware for type=BASE MTS (5), id 0000000000000000. [ 1380.046672] xc2028 2-0061: Loading firmware for type=MTS (4), id 000000000000b700. [ 1380.061536] xc2028 2-0061: Loading SCODE for type=MTS LCD NOGD MONO IF SCODE HAS_IF_4500 (6002b004), id 000000000000b700. [ 1380.245335] input: em28xx IR (em28xx #0) as /devices/pci0000:00/0000:00:1d.7/usb1/1-3/input/input9 [ 1380.245778] em28xx #0: Config register raw data: 0xd0 [ 1380.246649] em28xx #0: AC97 vendor ID = 0xffffffff [ 1380.247023] em28xx #0: AC97 features = 0x6a90 [ 1380.247031] em28xx #0: Empia 202 AC97 audio processor detected [ 1380.376550] tvp5150 2-005c: tvp5150am1 detected. [ 1380.472925] em28xx #0: v4l2 driver version 0.1.2 [ 1380.559658] em28xx #0: V4L2 video device registered as /dev/video0 [ 1380.559667] em28xx #0: V4L2 VBI device registered as /dev/vbi0 [ 1380.577370] usbcore: registered new interface driver em28xx [ 1380.579192] em28xx driver loaded [ 1380.598857] em28xx-audio.c: probing for em28x1 non standard usbaudio [ 1380.598863] em28xx-audio.c: Copyright (C) 2006 Markus Rechberger [ 1380.604262] Em28xx: Initialized (Em28xx Audio Extension) extension [ 1380.698157] tvp5150 2-005c: tvp5150am1 detected. [ 1381.096571] tvp5150 2-005c: tvp5150am1 detected. and after sudo modprobe em28xx-dvb: [ 1752.342963] Em28xx: Initialized (Em28xx dvb Extension) extension However when I attempt to generate a channel file ( scan -n -o zap -p fi-Jyväskylä > ~/.xine/channels.conf ) I get the following error: scanning fi-Jyväskylä using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' main:2273: FATAL: failed to open '/dev/dvb/adapter0/frontend0': 2 No such file or directory Using Totem's DVB daemon plug-in it will either tell me "no devices are present" or "the device has already been configured". I observe with 'ls -lh /dev/dvb' that the files are indeed not present. + --- + AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.21. + Architecture: i386 + AudioDevicesInUse: + USER PID ACCESS COMMAND + /dev/snd/controlC1: andreas 1405 F.... pulseaudio + /dev/snd/controlC0: andreas 1405 F.... pulseaudio + CRDA: Error: [Errno 2] Tiedostoa tai hakemistoa ei ole + Card0.Amixer.info: + Card hw:0 'I82801DBICH4'/'Intel 82801DB-ICH4 with STAC9750,51 at irq 7' + Mixer name : 'SigmaTel STAC9750,51' + Components : 'AC97a:83847650' + Controls : 38 + Simple ctrls : 24 + Card1.Amixer.info: + Card hw:1 'Em28xxAudio'/'Empia Em28xx Audio' + Mixer name : '' + Components : '' + Controls : 0 + Simple ctrls : 0 + Card1.Amixer.values: + + DistroRelease: Ubuntu 10.04 + HibernationDevice: RESUME=UUID=30e3faba-8e9e-4616-97ab-aae747c6a3b5 + InstallationMedia: Ubuntu 10.04 "Lucid Lynx" - Alpha i386 (20100224.1) + MachineType: Dell Computer Corporation Latitude D600 + Package: linux (not installed) + PccardctlIdent: + Socket 0: + no product info available + Socket 1: + product info: "O2Micro", "SmartCardBus Reader", "V1.0", "" + manfid: 0xffff, 0x0001 + PccardctlStatus: + Socket 0: + no card + Socket 1: + 5.0V 16-bit PC Card + Subdevice 0 (function 0) [unbound] + ProcCmdLine: BOOT_IMAGE=/boot/vmlinuz-2.6.32-18-generic root=UUID=99ec916b-a551-4e75-85d2-60d165d6e870 ro quiet splash + ProcEnviron: + LANG=fi_FI.utf8 + SHELL=/bin/bash + ProcVersionSignature: Ubuntu 2.6.32-18.27-generic 2.6.32.10+drm33.1 + Regression: No + RelatedPackageVersions: linux-firmware 1.33 + Reproducible: Yes + RfKill: + 0: hci0: Bluetooth + Soft blocked: no + Hard blocked: no + Tags: lucid + TestedUpstream: Yes + Uname: Linux 2.6.32-18-generic i686 + UserGroups: adm admin cdrom dialout lpadmin plugdev sambashare video + dmi.bios.date: 06/29/2005 + dmi.bios.vendor: Dell Computer Corporation + dmi.bios.version: A16 + dmi.board.name: 0D2125 + dmi.board.vendor: Dell Computer Corporation + dmi.chassis.type: 8 + dmi.chassis.vendor: Dell Computer Corporation + dmi.modalias: dmi:bvnDellComputerCorporation:bvrA16:bd06/29/2005:svnDellComputerCorporation:pnLatitudeD600:pvr:rvnDellComputerCorporation:rn0D2125:rvr:cvnDellComputerCorporation:ct8:cvr: + dmi.product.name: Latitude D600 + dmi.sys.vendor: Dell Computer Corporation ** Attachment added: "AlsaDevices.txt" http://launchpadlibrarian.net/42425915/AlsaDevices.txt -- [Hauppauge WinTV HVR-900][em28xx]Missing device files https://bugs.launchpad.net/bugs/318448 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
