This bug was fixed in the package linux-mvl-dove - 2.6.32-202.12
---------------
linux-mvl-dove (2.6.32-202.12) lucid; urgency=low
[ Andy Whitcroft ]
* rebase to Ubuntu-2.6.32-16.24
* [Config] updateconfigs following rebase to Ubuntu-2.6.32-16.24
* [Config] updateconfigs following rebase to Ubuntu-2.6.32-16.24
* lintian -- update debhelper package version dependancy
* lintian -- fix ghostscript dependancy
* lintian -- add required misc:Depends
* rename the debug packages to match archive standard
- LP: #527837
[ Eric Miao ]
* SAUCE: dove: disable conflicting v6 cache fns in zImage head.S
* [Config]: CONFIG_KEXEC=y and CONFIG_ATAGS_PROC=y
* [Config]: update configs for latest Marvell patchset
* [Config]: disable OABI_COMPAT
- LP: #534277
[ Saeed Bishara ]
* SAUCE: arm: invalidate TLBs when enabling mmu
* SAUCE: arm: disable L2 cache in the v7 finish function
[ Tony Lindgren ]
* SAUCE: arm: Fix init_atags_procfs() to check tag->hdr.size
[ Upstream Kernel Changes ]
* Revert "printk: remove unused code from kernel/printk.c"
* Revert "Save thread registers in coredumps" Because this patch is
already in the kernel.
* Revert "dove: enable cpu mode (v6/v7) in run-time detection"
* Revert "ARM: provide the cpu_match function to PJ4"
* Revert "ARM: introduce the cpu_match function to the proc_info"
* ARM: 5884/1: arm: Fix DCC console for v7
* ARM: 5885/1: arm: Flush TLB entries in setup_mm_for_reboot()
* ARM: 5886/1: arm: Fix cpu_proc_fin() for proc-v7.S and make kexec work
* ARM: 5888/1: arm: Update comments in cacheflush.h and remove
unnecessary V6 and V7 comments
* rt5630: fix codec->hw_read function
* mm: Check if any page in a pageblock is reserved before marking it
MIGRATE_RESERVE
* Add build option to to set the default panic timeout.
* sched: Enable might_sleep before initializing drivers.
* Add code to prevent system calls from being restarted muliple times
before returning from the kernel.
* Save thread registers in coredumps
* armv6 dcc tty driver
* PM: Add wake lock api.
* PM: Add early suspend api.
* PM: Implement wakelock api.
* PM: Implement early suspend api
* PM: Add user-space wake lock api.
* PM: wakelock: Abort task freezing if a wake lock is held.
* PM: earlysuspend: Add console switch when user requested sleep state
changes.
* PM: earlysuspend: Removing dependence on console.
* rtc: Add android alarm driver.
* rtc: Try to prevent RTC errors from accumulating.
* switch: switch class and GPIO drivers.
* pmem: Add pmem driver
* Add android_aid.h
* ashmem for 2.6.27.
* Add missing conflict codes for 0079-ashmem-for-2.6.27.patch
* Paranoid network.
* net: socket ioctl to reset connections matching local address
* sysfs_net_ipv4: Add sysfs-based knobs for controlling TCP window size
* uidstat: Adding uid stat driver to collect network statistics.
* adding conflict patch codes for
0083-uidstat-Adding-uid-stat-driver-to-collect-network-s.patch
* FAT: Add new ioctl VFAT_IOCTL_GET_VOLUME_ID for reading the volume ID.
* Grants system server access to /proc/<pid>/oom_adj for Android
applications.
* Input: Generic GPIO Input device.
* add missing conflict code for
0086-Input-Generic-GPIO-Input-device.patch
* Input: Hold wake lock while event queue is not empty.
* Input: Use monotonic time for event time stamps.
* Input: synaptics_i2c_rmi: Driver for Synaptics Touchscreens using RMI
over I2C.
* input: Add keyreset driver.
* mmc: Add status IRQ and status callback function to mmc platform data
* mmc: sd: Add new CONFIG_MMC_PARANOID_SD_INIT for enabling retries
during SD detection
* mmc: Add concept of an 'embedded' SDIO device.
* trout: Add functions for WiFi
* mmc: Add new API call 'sdio_reset_comm' for resetting communication
with an SDIO device
* mmc: sd: When resuming, try a little harder to init the card
* mmc: mmcblk: Add new feature 'CONFIG_MMC_BLOCK_PARANOID_RESUME'
* mmc: sd: Add retries in re-detection
* android_usb: Composite USB gadget driver for android.
* rfkill: Introduce CONFIG_RFKILL_PM and use instead of CONFIG_PM to
power down
* tiwlan: Add abstract wifi control functions support
* android: Add android config documentation to boot framework.
* block: block_dump: Add number of sectors to debug output
* fs: block_dump: Don't display inode changes if block_dump < 2
* regenerated code for
0107-mmc-core-Hold-a-wake-lock-accross-delayed-work-m.patch
* mmc: sd: Remove debugging printk
* printk: Fix log_buf_copy termination.
* kernel_debugger_core: add interrupt-context debugger core
* kernel_debugger_core: Add sysrq command.
* pmem: Add include sched.h to fix compile errors
* net: Fix compilation of the IPv6 module
* ashmem: Don't install fault handler for private mmaps.
* ashmem: Add common prefix to name reported in /proc/pid/maps
* net: add PPP on L2TP Access Concentrator (PPPoLAC) driver.
* cgroup: Add generic cgroup subsystem permission checks.
* add missing conflict codes for
0124-cgroup-Add-generic-cgroup-subsystem-permission-chec.patch
* nohz: Fix ondemand governor not always ramping up on 100% load.
* usb: gadget: android: Allow usb charging to draw up to 500mA instead of
250.
* regnerate patch for
0127-futex-Restore-one-of-the-fast-paths-eliminated-by-3.patch
* Optionally flush entire dcache from v6_dma_flush_range
* net: add PPP on PPTP Network Server (PPPoPNS) driver.
* sdio: fix sdio_reset_comm() error path
* net: Fix a bitmask in PPPoPNS and rename constants in PPPoPNS and
PPPoLAC.
* net: Fix a potential deadlock while releasing PPPoLAC/PPPoPNS socket.
* ashmem: don't require a page aligned size
* security: Add AID_NET_RAW and AID_NET_ADMIN capability check in
cap_capable().
* net: Replace AID_NET_RAW checks with capable(CAP_NET_RAW).
* net: Force PPPoLAC and PPPoPNS to bind an interface before creating PPP
channel.
* Add default configuration for Android
* Sync with the newest dove_defconfig
* Turn off TLS feature for android in v7
* Fix compiling error for lowmemorykiller
* Fix Compiling error for shmem
* Temporary disable pm_suspend call.
* Fix crash error for shmem
* Fix met compiling errors from 2.6.31 kernel to 2.6.32 kernel.
* Sync up with 2.6.32.2's dove_defconfig
* cesa: add address decoding windows initialization code
* Refine comments and algorithm for easier to understand LCD's HW RGB
format.
* PM: runtime support for V6 or V7 mode
* Remove all Z0 specific code
* dove: remove remaning Z0 stuff
* Add auto-calibration
* fix compilation error (kernel/power/Makefile)
* update dove_avng_y1_defconfig
* dovefb: clean up CONFIG_DOVEFB_SINGLE_DISPLAY_ACCURATE_PCLK
* 1. fill initial data for dcon. 2. refine backlight driver interface.
* 1. add clock disable and enable interface 2. refine changing LCD source
clock implementation.
* Fill backlight driver platform data
* 1. apply Tawfik's patch to hook fb_blank event. 2. add LCD power on and
off interface.
* Refine backlight interface more portable
* 1. Refine dcon power management feature 2. Implement sysfs interfaces.
* 1. Fix blank function setting to wrong mode when suspend. 2. Add SRAM
power down interface.
* remove compiling warning.
* dove: remove another DOVE_REV_Z0 stuff
* dove: sync dove_defconfig with latest patches
* dove: fix compilation warning in pm.c
* Adds ADI9889 HDMI transmitter support
* Dove: Add Video Plug support
* MPP changes for Dove -
* Swap R&B for Video plug on video overlay Unclear why this is required,
but it solves color bitmapping. Keep now for Video plug but requires
more research
* 1. Remove testing code. 2. disable dumb interface as well when receives
FB_BLANK.
* Dove nand: add support for Two CS for the DB board
* Dove nand: Add support for "cmdlinepart" option Add support for
"cmdlinepart" option in kernel command line dove-nand should be used as
the NAND HAL device name. example: mtdparts=dove-nand:1g(swap),-(root)
* dove: use dove_cesa_addr_dec_data instead of dove_eth_addr_dec_data for
cesa driver
* dovefb: fix compilation error when mv_spi is disabled
* Dove: remove gpu_size, vmeta_size and pvt_size kernel command line
parameters from code as they have no effect because fixup function is
called before parse_cmdline function ( see arch/arm/kernel/setup.c )
* VMeta PM func: 1. Power on the VMeta only when VMeta was been used 2.
Support suspend/resume when VMeta was been used (also need user space
player support)
* Add a watch dog timer for Vmeta suspend/resume func
* Dove NAND: fix double byte command on writing small pages
* Change Vmeta PM clock control to using Linux clock framework
* Disable the Vmtea clock/power as default
* Fix MMC/SD cannot be detected issue due to merge upgraded from .31 to
.32 Signed-off-by: Steve Guo <steve....@marvell.com>
* dove: disable some andriod features
* dove: fix crash in shmem
* PM: Debugger Reset Workaround in Deep-Idle
* dove: increase BOOT_PARAMS_SIZE for dram params
* Add support for AV-D1 X0 board and modify ADI9889 driver to fit Linux
coding style
* remove android config from dove_defconfig
* update dove_avng_y1_defconfig
* Fixed AC97 read error issue. Modified SOC sound control items.
* update dove_avng_x0_defconfig : Disable CONFIG_DOVE_DEBUGGER_MODE_V6
* dove: enable UBIFS extended features and advanced compression
* crypt: update ocf to latest release
* dove: enable kexec support
* sound: rt5623 codec: deprecate hw_read and fix driver name
* dove: use updated i2s codec name
* dove: fix dai structure for avengers boards.
* dove: delete the i2c-dummy.c driver which is not used by any system
* sound: rename cs42l51 codec i2c driver from i2s_i2c to cs42l51
* sound: change rt5630 name from i2s_i2c to rt5630
* dove: configure pm mpps for new revision of avengers board
* dove: change power button code to KEY_SLEEP
* Add more resolution support in kernel driver according VGA timing spec
* LCD: disabled CONFIG_DOVEFB_SINGLE_DISPLAY_ACCURATE_PCLK and instead
disabled accurate clock option in runtime if both LCD units are
enabled; this will enable using the same uImage for dual and non-dual
mode.
* 1. fill initial data for dcon. 2. refine backlight driver interface.
* dove: cleanup gpu_size kernel parameter
* pcie - add option to disable scan by command line parameter
* PM: add FB notifier to manage Book/Deep-Idle toggeling
* ARM: Ensure ARMv6/7 mm files are built using appropriate assembler
options
* kirkwood: fix compilation errors
* dove: disable highmem and enable CONFIG_VMSPLIT_2G
* dove: set SKB_HEADROOM to 32 instead of 16
* bmm: export outer_cache
* dove: add missing pj4 name entries
* Fix thread stack overflow caused by Dove NAND HAL driver
* Remove unused include file and declaration
* Roll back wait for vsync mechanism to wait_event_interruptable_timeout
and give timeout delay from 40ms to 4ms.
* dovefb: remove another DOVE_REV_Z0 stuff
* mv643xx_eth: don't include cache padding in rx desc buffer size
* fix build error introduced by add missing conflict codes for
0124-cgroup-Add-generic-cgroup-subsystem-permission-chec.patch
* crypto: add openssl patch for user space to utilize the cesa engine
* crypto: update openswan patch for version 2.6.24
* dove: add device driver for the GPU gc600 engine
* Marvell Buffer Management Module for VPU & GPU memory buffer maintain
* BMM: split VPU & GPU to choice use BMM or not
* dove: enable building the bmm driver as module
* cesa: remove patch for openswan version 2.6.18
* Configure new LCD register for upcoming DOVE A0 Chip
* fix pixclk when under interlaced mode
* Not to power off LCD SRAM when system blanks screen.
* dvs: make dvs_enable variable depend on board, and change the default
to enable instead of disable on Dove DB board.
[ Ubuntu: 2.6.32-16.24 ]
* armel -- perf userspace does not support arm
* ia64 -- libelf-dev/binutils-dev to not provide necessary libraries
[ Ubuntu: 2.6.32-16.23 ]
* SAUCE: PM report driver and device suspend/resume times -- move config
* update to standards version 3.8.4.0
* printenv -- expose all of the package selectors
* source package -- cleanup source content control
* doc package -- ensure we do build package content on buildd
* lintian -- correct the address in the debian/copyright
* lintian -- update debhelper package version dependancy
* lintian -- fix ghostscript dependancy
* lintian -- add required misc:Depends
* lintian -- move our debhelper compat level to debian/compat
* perf -- build the kernel carried tools
* perf -- add linux-tools carrying the version switches and manuals
* SAUCE: fix up Kconfig for staging drivers
* [Config] enable NOUVEAU etc following drm backport
* update DRM to mainline v2.6.33
* [Config] Remove AppArmor config options that no longer exist (ports)
* [Config] updateportsconfigs following drm update
* ubuntu: AppArmor -- update to mainline 2010-03-04
* SAUCE: AppArmor: Reintroduce AppArmor 2.4 compatibility
* SAUCE: AppArmor: replace strim with strstrip for 2.6.32 kernels
* [Config] Remove AppArmor config options that no longer exist
* ubuntu: rtl8192se -- version 2010-0115,0014
- LP: #530275
* [Config] added CONFIG_RTL8192SE module.
- LP: #530275
* [Config] Added vmw_pvscsi to d-i/scsi-modules
- LP: #531017
* [Upstream] netfilter: xt_recent: Add an entry reaper
* Revert "KVM: x86 emulator: Check CPL level during privilege instruction
emulation"
* Revert "KVM: x86 emulator: Fix popf emulation"
* Revert "KVM: x86 emulator: Check IOPL level during io instruction
emulation"
* Revert "KVM: x86 emulator: Add Virtual-8086 mode of emulation"
* Revert "KVM: fix memory access during x86 emulation."
* Add vlan (8021.Q) module package for d-i.
* (pre-stable) drm/i915: blacklist lid status: Sony VGN-BX196VP, Dell
Inspiron 700m
- LP: #515246
* [Upstream] docbook: need xmldoclinks for all doc types
* x86: set_personality_ia32() misses force_personality32
* lib: Introduce generic list_sort function
* drm/nv50: Implement ctxprog/state generation.
* drm/nv50: Remove redundant/incorrect ctxvals initialisation.
* (pre-stable) drm/i915: blacklist lid status: Sony VGN-BX196VP, Dell
Inspiron 700m
- LP: #515246
[ Ubuntu: 2.6.32-15.22 ]
* Revert "[Config] added new config option CONFIG_SR_REPORT_TIME_LIMIT"
* Revert "SAUCE: PM report driver and device suspend/resume times."
* [Config] set CONFIG_SR_REPORT_TIME_LIMIT
* SAUCE: PM report driver and device suspend/resume times.
[ Ubuntu: 2.6.32-15.21 ]
* Revert "(pre-stable) drm/i915: Increase fb alignment to 64k"
* Revert "[Config] lenovo-sl-laptop -- enable"
* Revert "ubuntu: lenovo-sl-laptop -- git tip (b19a08f81f)"
* armel -- cramfs module will no longer be built
* d-i -- make all modules optional
* rename the debug packages to match archive standard
- LP: #527837
* lenovo-sl-laptop is no longer built
* Disable 4MB page tables for Atom, work around errata AAE44
- LP: #523112
* ubuntu: dm-raid4-5: Depend on XOR_BLOCKS
* ubuntu: fsam7400: Depend on CHECK_SIGNATURE
* SAUCE: drm/i915: don't change DRM configuration when releasing load
detect pipe
- LP: #488328
* [Config] armel Update versatile initrd configs
- LP: #524893
* SAUCE: [um] Don't use nx_enabled under UML
- LP: #524849
* [Config] added new config option CONFIG_SR_REPORT_TIME_LIMIT
* SAUCE: v3 - Add Dell Business Class Netbook LED driver
* SAUCE: PM report driver and device suspend/resume times.
* Revert "[Upstream] e1000e: enhance frame fragment detection"
- CVE-2009-4538
* Revert "[Upstream] e1000: enhance frame fragment detection"
- CVE-2009-4536
* [Config] Enabled CONFIG_LEDS_DELL_NETBOOKS=m
* SAUCE: (pre-stable) netfilter: xt_recent: fix buffer overflow
* SAUCE: (pre-stable) netfilter: xt_recent: fix false match
* Revert "(pre-stable) eCryptfs: Add getattr function"
* Fix potential crash with sys_move_pages
* futex_lock_pi() key refcnt fix
* futex: Handle user space corruption gracefully
* futex: Handle futex value corruption gracefully
* Fix race in tty_fasync() properly
* hwmon: (w83781d) Request I/O ports individually for probing
* hwmon: (lm78) Request I/O ports individually for probing
* hwmon: (adt7462) Wrong ADT7462_VOLT_COUNT
* ALSA: ctxfi - fix PTP address initialization
* drm/i915: disable hotplug detect before Ironlake CRT detect
* drm/i915: enable self-refresh on 965
* drm/i915: Disable SR when more than one pipe is enabled
* drm/i915: Fix DDC on some systems by clearing BIOS GMBUS setup.
* drm/i915: Add HP nx9020/SamsungSX20S to ACPI LID quirk list
* drm/i915: Fix the incorrect DMI string for Samsung SX20S laptop
* drm/i915: Add MALATA PC-81005 to ACPI LID quirk list
* usb: r8a66597-hcd: Flush the D-cache for the pipe-in transfer buffers.
* i2c-tiny-usb: Fix on big-endian systems
* drm/i915: handle FBC and self-refresh better
* drm/i915: Increase fb alignment to 64k
* drm/i915: Update write_domains on active list after flush.
* regulator: Fix display of null constraints for regulators
* ALSA: hda-intel: Avoid divide by zero crash
* CPUFREQ: Fix use after free of struct powernow_k8_data
* freeze_bdev: don't deactivate successfully frozen MS_RDONLY sb
* cciss: Make cciss_seq_show handle holes in the h->drv[] array
* ioat: fix infinite timeout checking in ioat2_quiesce
* resource: add helpers for fetching rlimits
* fs/exec.c: restrict initial stack space expansion to rlimit
* cifs: fix length calculation for converted unicode readdir names
* NFS: Fix a reference leak in nfs_wb_cancel_page()
* NFS: Try to commit unstable writes in nfs_release_page()
* NFSv4: Don't allow posix locking against servers that don't support it
* NFSv4: Ensure that the NFSv4 locking can recover from stateid errors
* NFS: Fix an Oops when truncating a file
* NFS: Fix a umount race
* NFS: Fix a bug in nfs_fscache_release_page()
* NFS: Fix the mapping of the NFSERR_SERVERFAULT error
* md: fix 'degraded' calculation when starting a reshape.
* V4L/DVB: dvb-core: fix initialization of feeds list in demux filter
* Export the symbol of getboottime and mmonotonic_to_bootbased
* kvmclock: count total_sleep_time when updating guest clock
* KVM: PIT: control word is write-only
* tpm_infineon: fix suspend/resume handler for pnp_driver
* amd64_edac: Do not falsely trigger kerneloops
* netfilter: nf_conntrack: fix memory corruption with multiple namespaces
* netfilter: nf_conntrack: per netns nf_conntrack_cachep
* netfilter: nf_conntrack: restrict runtime expect hashsize modifications
* netfilter: xtables: compat out of scope fix
* netfilter: nf_conntrack: fix hash resizing with namespaces
* drm/i915: remove full registers dump debug
* drm/i915: add i915_lp_ring_sync helper
* drm/i915: Don't wait interruptible for possible plane buffer flush
* dasd: remove strings from s390dbf
* crypto: padlock-sha - Add import/export support
* wmi: Free the allocated acpi objects through wmi_get_event_data
* dell-wmi, hp-wmi, msi-wmi: check wmi_get_event_data() return value
* /dev/mem: introduce size_inside_page()
* devmem: check vmalloc address on kmem read/write
* devmem: fix kmem write bug on memory holes
* SCSI: mptfusion : mptscsih_abort return value should be SUCCESS instead
of value 0.
* sh: Couple kernel and user write page perm bits for CONFIG_X2TLB
* ALSA: hda - use WARN_ON_ONCE() for zero-division detection
* dst: call cond_resched() in dst_gc_task()
* ALSA: hda - Improved MacBook (Pro) 5,1 / 5,2 support
* befs: fix leak
* rtc-fm3130: add missing braces
* Call flush_dcache_page after PIO data transfers in libata-sff.c
* ahci: add Acer G725 to broken suspend list
* pktgen: Fix freezing problem
* x86/amd-iommu: Fix IOMMU-API initialization for iommu=pt
* x86/amd-iommu: Fix deassignment of a device from the pt_domain
* x86: Re-get cfg_new in case reuse/move irq_desc
* Staging: fix rtl8187se compilation errors with mac80211
* ALSA: usb-audio - Avoid Oops after disconnect
* serial: 8250: add serial transmitter fully empty test
* sysfs: sysfs_sd_setattr set iattrs unconditionally
* class: Free the class private data in class_release
* USB: usbfs: only copy the actual data received
* USB: usbfs: properly clean up the as structure on error paths
* rtl8187: Add new device ID
* ACPI: Add NULL pointer check in acpi_bus_start
* ACPI: fix High cpu temperature with 2.6.32
* drm/radeon/kms: use udelay for short delays
* NFS: Too many GETATTR and ACCESS calls after direct I/O
* eCryptfs: Add getattr function
* b43: Fix throughput regression
* ath9k: Fix sequence numbers for PAE frames
* mac80211: Fix probe request filtering in IBSS mode
* iwlwifi: Fix to set correct ht configuration
* dm stripe: avoid divide by zero with invalid stripe count
* dm log: userspace fix overhead_size calcuations
* Linux 2.6.32.9
* sfc: Fix SFE4002 initialisation
* sfc: Fix sign of efx_mcdi_poll_reboot() error in efx_mcdi_poll()
* sfc: SFE4002/SFN4112F: Widen temperature and voltage tolerances
* (pre-stable) HID: handle joysticks with large number of buttons
- LP: #492056
* (pre-stable) HID: extend mask for BUTTON usage page
- LP: #492056
* PM: Measure device suspend and resume times
* e1000: enhance frame fragment detection
- CVE-2009-4536
* e1000e: enhance frame fragment detection
- CVE-2009-4538
* KVM: fix memory access during x86 emulation.
- CVE-2010-0306
* KVM: x86 emulator: Add Virtual-8086 mode of emulation
- CVE-2010-0306
* KVM: x86 emulator: Check IOPL level during io instruction emulation
- CVE-2010-0306
* KVM: x86 emulator: Fix popf emulation
- CVE-2010-0306
* KVM: x86 emulator: Check CPL level during privilege instruction
emulation
- CVE-2010-0306
* Input: wacom - ensure the device is initialized properly upon resume
* Input: wacom - add defines for packet lengths of various devices
* Input: wacom - add support for new LCD tablets
- LP: #516777
[ Ubuntu: 2.6.32-14.20 ]
* rebuild following the GCC update to match compiler for out of tree modules
* Revert "[Config] drbd -- enable"
* Revert "ubuntu: drbd -- version 8.3.1"
* SAUCE: khubd -- switch USB product/manufacturer/serial handling to RCU
- LP: #510937
-- Andy Whitcroft <a...@canonical.com> Mon, 08 Mar 2010 15:26:14 +0000
** Changed in: linux-mvl-dove (Ubuntu)
Status: In Progress => Fix Released
** CVE added: http://www.cve.mitre.org/cgi-
bin/cvename.cgi?name=2009-4536
** CVE added: http://www.cve.mitre.org/cgi-
bin/cvename.cgi?name=2009-4538
** CVE added: http://www.cve.mitre.org/cgi-
bin/cvename.cgi?name=2010-0306
--
disable OABI_COMPAT
https://bugs.launchpad.net/bugs/534277
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
