Public bug reported:
sozial...@sozial-pc:~$ uname -a
Linux sozial-pc 2.6.31-16-generic-pae #53-Ubuntu SMP Tue Dec 8 05:20:21 UTC
2009 i686 GNU/Linux
sozial...@sozial-pc:~$ cat /proc/version_signature > version.log
sozial...@sozial-pc:~$ dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.31-16-generic-pae (bui...@rothera) (gcc
version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #53-Ubuntu SMP Tue Dec 8 05:20:21 UTC
2009 (Ubuntu 2.6.31-16.53-generic-pae)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000cc000 - 00000000000d2080 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001f7f0000 (usable)
[ 0.000000] BIOS-e820: 000000001f7f0000 - 000000001f7f8000 (ACPI data)
[ 0.000000] BIOS-e820: 000000001f7f8000 - 000000001f800000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.3 present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable)
==> (reserved)
[ 0.000000] last_pfn = 0x1f7f0 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FE0000000 write-back
[ 0.000000] 1 base 01F800000 mask FFF800000 uncachable
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 base 0E0000000 mask FFC000000 write-combining
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable)
[ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000cc000 - 00000000000d2080 (reserved)
[ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000001f7f0000 (usable)
[ 0.000000] modified: 000000001f7f0000 - 000000001f7f8000 (ACPI data)
[ 0.000000] modified: 000000001f7f8000 - 000000001f800000 (ACPI NVS)
[ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] init_memory_mapping: 0000000000000000-000000001f7f0000
[ 0.000000] Using x86 segment limits to approximate NX protection
[ 0.000000] 0000000000 - 0000200000 page 4k
[ 0.000000] 0000200000 - 001f600000 page 2M
[ 0.000000] 001f600000 - 001f7f0000 page 4k
[ 0.000000] kernel direct mapping tables up to 1f7f0000 @ 10000-16000
[ 0.000000] RAMDISK: 172e4000 - 17a336f9
[ 0.000000] ACPI: RSDP 000fb080 00014 (v00 AMI )
[ 0.000000] ACPI: RSDT 1f7f0000 00034 (v01 HP-BDD HPBDD-JK 00000010 MSFT
00000097)
[ 0.000000] ACPI: FACP 1f7f0040 00081 (v02 HP-BDD HPBDD-JK 00000011 MSFT
00000097)
[ 0.000000] ACPI: DSDT 1f7f01a0 02261 (v01 HP-BDD HPBDD-JK 00001000 MSFT
0100000D)
[ 0.000000] ACPI: FACS 1f7f8000 00040
[ 0.000000] ACPI: BOOT 1f7f00d0 00028 (v01 HP-BDD HPBDD-JK 00000001 MSFT
00000097)
[ 0.000000] ACPI: APIC 1f7f0140 00054 (v01 HP-BDD HPBDD-JK 00000001 MSFT
00000097)
[ 0.000000] ACPI: DBGP 1f7f0100 00034 (v01 HP-BDD 00000001 MSFT
00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 503MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 1f7f0000
[ 0.000000] low ram: 0 - 1f7f0000
[ 0.000000] node 0 low ram: 00000000 - 1f7f0000
[ 0.000000] node 0 bootmap 00012000 - 00015f00
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 001f7f0000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000
- 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000
- 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000
- 0000007000]
[ 0.000000] #3 [0000100000 - 00008ad9a0] TEXT DATA BSS ==> [0000100000
- 00008ad9a0]
[ 0.000000] #4 [00172e4000 - 0017a336f9] RAMDISK ==> [00172e4000
- 0017a336f9]
[ 0.000000] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00
- 0000100000]
[ 0.000000] #6 [00008ae000 - 00008b40ee] BRK ==> [00008ae000
- 00008b40ee]
[ 0.000000] #7 [0000010000 - 0000012000] PGTABLE ==> [0000010000
- 0000012000]
[ 0.000000] #8 [0000012000 - 0000016000] BOOTMAP ==> [0000012000
- 0000016000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x0001f7f0
[ 0.000000] HighMem 0x0001f7f0 -> 0x0001f7f0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0001f7f0
[ 0.000000] On node 0 totalpages: 128895
[ 0.000000] free_area_init_node: node 0, pgdat c078bd20, node_mem_map
c1000200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 976 pages used for memmap
[ 0.000000] Normal zone: 123936 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000cc000
[ 0.000000] PM: Registered nosave memory: 00000000000cc000 - 00000000000d2000
[ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 1f800000 (gap:
1f800000:df400000)
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages at c13f2000, static data 35612 bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total
pages: 127887
[ 0.000000] Kernel command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.31-16-generic-pae
root=UUID=d8704dcc-d2c6-4770-8521-f35dcab84434 ro quiet splash
[ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 2579840 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want
memory cgroups
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 493004k/516032k available (4590k kernel code, 22420k
reserved, 2147k data, 544k init, 0k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
[ 0.000000] pkmap : 0xffa00000 - 0xffc00000 (2048 kB)
[ 0.000000] vmalloc : 0xdfff0000 - 0xff9fe000 ( 506 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xdf7f0000 ( 503 MB)
[ 0.000000] .init : 0xc0795000 - 0xc081d000 ( 544 kB)
[ 0.000000] .data : 0xc057b994 - 0xc07947a8 (2147 kB)
[ 0.000000] .text : 0xc0100000 - 0xc057b994 (4590 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor
mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=1,
Nodes=1
[ 0.000000] NR_IRQS:2304 nr_irqs:256
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2359.107 MHz processor.
[ 0.001855] Console: colour VGA+ 80x25
[ 0.001861] console [tty0] enabled
[ 0.004012] Calibrating delay loop (skipped), value calculated using timer
frequency.. 4718.21 BogoMIPS (lpj=9436428)
[ 0.004039] Security Framework initialized
[ 0.004067] AppArmor: AppArmor initialized
[ 0.004078] Mount-cache hash table entries: 512
[ 0.004441] Initializing cgroup subsys ns
[ 0.004448] Initializing cgroup subsys cpuacct
[ 0.004454] Initializing cgroup subsys memory
[ 0.004467] Initializing cgroup subsys freezer
[ 0.004471] Initializing cgroup subsys net_cls
[ 0.004494] CPU: Trace cache: 12K uops, L1 D cache: 8K
[ 0.004499] CPU: L2 cache: 512K
[ 0.004503] CPU: Hyper-Threading is disabled
[ 0.004508] mce: CPU supports 4 MCE banks
[ 0.004522] CPU0: Thermal monitoring enabled (TM1)
[ 0.004537] Performance Counters: no PMU driver, software counters only.
[ 0.004547] Checking 'hlt' instruction... OK.
[ 0.021034] SMP alternatives: switching to UP code
[ 0.040036] Freeing SMP alternatives: 19k freed
[ 0.040073] ACPI: Core revision 20090521
[ 0.047969] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.086991] CPU0: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 07
[ 0.088001] Brought up 1 CPUs
[ 0.088001] Total of 1 processors activated (4718.21 BogoMIPS).
[ 0.088001] CPU0 attaching NULL sched-domain.
[ 0.088001] Booting paravirtualized kernel on bare hardware
[ 0.088001] regulator: core version 0.5
[ 0.088001] Time: 10:12:31 Date: 01/08/10
[ 0.088001] NET: Registered protocol family 16
[ 0.088001] EISA bus registered
[ 0.088001] ACPI: bus type pci registered
[ 0.088001] PCI: PCI BIOS revision 2.10 entry at 0xfdae1, last bus=3
[ 0.088001] PCI: Using configuration type 1 for base access
[ 0.089111] bio: create slab <bio-0> at 0
[ 0.089712] ACPI: EC: Look up EC in DSDT
[ 0.093978] ACPI: Interpreter enabled
[ 0.093986] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.094018] ACPI: Using IOAPIC for interrupt routing
[ 0.096954] ACPI: No dock devices found.
[ 0.097131] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.097193] pci 0000:00:00.0: reg 10 32bit mmio: [0xe0000000-0xe3ffffff]
[ 0.097292] pci 0000:00:02.0: reg 10 32bit mmio: [0xd0000000-0xd7ffffff]
[ 0.097301] pci 0000:00:02.0: reg 14 32bit mmio: [0xdff80000-0xdfffffff]
[ 0.097433] pci 0000:00:1d.0: reg 20 io port: [0xe400-0xe41f]
[ 0.097499] pci 0000:00:1d.1: reg 20 io port: [0xe800-0xe81f]
[ 0.097565] pci 0000:00:1d.2: reg 20 io port: [0xec00-0xec1f]
[ 0.097810] pci 0000:00:1d.7: reg 10 32bit mmio: [0xdff7bc00-0xdff7bfff]
[ 0.097879] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.097885] pci 0000:00:1d.7: PME# disabled
[ 0.097949] * The chipset may have PM-Timer Bug. Due to workarounds for a
bug,
[ 0.097951] * this clock source is slow. If you are sure your timer does not
have
[ 0.097953] * this bug, please use "acpi_pm_good" to disable the workaround
[ 0.098005] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH4
ACPI/GPIO/TCO
[ 0.098010] pci 0000:00:1f.0: quirk: region 0400-043f claimed by ICH4 GPIO
[ 0.098040] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[ 0.098048] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[ 0.098057] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
[ 0.098065] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
[ 0.098074] pci 0000:00:1f.1: reg 20 io port: [0xfc00-0xfc0f]
[ 0.098082] pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff]
[ 0.098145] pci 0000:00:1f.3: reg 20 io port: [0xc00-0xc1f]
[ 0.098201] pci 0000:00:1f.5: reg 10 io port: [0xe000-0xe0ff]
[ 0.098209] pci 0000:00:1f.5: reg 14 io port: [0xdc00-0xdc3f]
[ 0.098217] pci 0000:00:1f.5: reg 18 32bit mmio: [0xdff7ba00-0xdff7bbff]
[ 0.098226] pci 0000:00:1f.5: reg 1c 32bit mmio: [0xdff7b900-0xdff7b9ff]
[ 0.098263] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
[ 0.098269] pci 0000:00:1f.5: PME# disabled
[ 0.098329] pci 0000:03:08.0: reg 10 32bit mmio: [0xdfdff000-0xdfdfffff]
[ 0.098338] pci 0000:03:08.0: reg 14 io port: [0xcc00-0xcc3f]
[ 0.098382] pci 0000:03:08.0: supports D1 D2
[ 0.098385] pci 0000:03:08.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.098390] pci 0000:03:08.0: PME# disabled
[ 0.098428] pci 0000:00:1e.0: transparent bridge
[ 0.098434] pci 0000:00:1e.0: bridge io port: [0xc000-0xcfff]
[ 0.098439] pci 0000:00:1e.0: bridge 32bit mmio: [0xdfd00000-0xdfdfffff]
[ 0.098453] pci_bus 0000:00: on NUMA node 0
[ 0.098459] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.098576] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.ICHB._PRT]
[ 0.101711] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.101831] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.101949] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.102135] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.102254] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 *4 5 6 7 10 11 12 14 15)
[ 0.102372] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15)
*0, disabled.
[ 0.102492] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15)
*0, disabled.
[ 0.102673] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.102954] SCSI subsystem initialized
[ 0.103077] libata version 3.00 loaded.
[ 0.103195] usbcore: registered new interface driver usbfs
[ 0.103221] usbcore: registered new interface driver hub
[ 0.103258] usbcore: registered new device driver usb
[ 0.103437] ACPI: WMI: Mapper loaded
[ 0.103441] PCI: Using ACPI for IRQ routing
[ 0.103886] Bluetooth: Core ver 2.15
[ 0.103934] NET: Registered protocol family 31
[ 0.103938] Bluetooth: HCI device and connection manager initialized
[ 0.103942] Bluetooth: HCI socket layer initialized
[ 0.103945] NetLabel: Initializing
[ 0.103947] NetLabel: domain hash size = 128
[ 0.103949] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.103973] NetLabel: unlabeled traffic allowed by default
[ 0.106756] pnp: PnP ACPI init
[ 0.106805] ACPI: bus type pnp registered
[ 0.108124] pnp: PnP ACPI: found 7 devices
[ 0.108128] ACPI: ACPI bus type pnp unregistered
[ 0.108135] PnPBIOS: Disabled by ACPI PNP
[ 0.108156] system 00:01: ioport range 0x3f0-0x3f1 has been reserved
[ 0.108161] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[ 0.108165] system 00:01: ioport range 0x400-0x43f has been reserved
[ 0.108169] system 00:01: ioport range 0x800-0x87f has been reserved
[ 0.108175] system 00:01: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.143676] AppArmor: AppArmor Filesystem Enabled
[ 0.143716] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
[ 0.143722] pci 0000:00:1e.0: IO window: 0xc000-0xcfff
[ 0.143729] pci 0000:00:1e.0: MEM window: 0xdfd00000-0xdfdfffff
[ 0.143735] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.143752] pci 0000:00:1e.0: setting latency timer to 64
[ 0.143761] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.143765] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.143769] pci_bus 0000:03: resource 0 io: [0xc000-0xcfff]
[ 0.143772] pci_bus 0000:03: resource 1 mem: [0xdfd00000-0xdfdfffff]
[ 0.143776] pci_bus 0000:03: resource 3 io: [0x00-0xffff]
[ 0.143780] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.143837] NET: Registered protocol family 2
[ 0.143974] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.144370] TCP established hash table entries: 16384 (order: 5, 131072
bytes)
[ 0.144512] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.144645] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.144649] TCP reno registered
[ 0.144784] NET: Registered protocol family 1
[ 0.144883] Trying to unpack rootfs image as initramfs...
[ 0.456279] Freeing initrd memory: 7485k freed
[ 0.473719] Simple Boot Flag at 0x79 set to 0x1
[ 0.473846] cpufreq-nforce2: No nForce2 chipset.
[ 0.473890] Scanning for low memory corruption every 60 seconds
[ 0.474073] audit: initializing netlink socket (disabled)
[ 0.474119] type=2000 audit(1262945551.470:1): initialized
[ 0.484254] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.486239] VFS: Disk quotas dquot_6.5.2
[ 0.486320] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.487050] fuse init (API version 7.12)
[ 0.487235] msgmni has been set to 977
[ 0.487723] alg: No test for stdrng (krng)
[ 0.487742] io scheduler noop registered
[ 0.487745] io scheduler anticipatory registered
[ 0.487749] io scheduler deadline registered
[ 0.487815] io scheduler cfq registered (default)
[ 0.487840] pci 0000:00:02.0: Boot video device
[ 0.487938] pci 0000:03:08.0: Firmware left e100 interrupts enabled;
disabling
[ 0.488052] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.488087] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.488264] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.488270] ACPI: Power Button [PWRF]
[ 0.488338] input: Power Button as
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 0.488342] ACPI: Power Button [PWRB]
[ 0.488595] processor LNXCPU:00: registered as cooling_device0
[ 0.488600] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 0.489972] isapnp: Scanning for PnP cards...
[ 0.654250] Switched to high resolution mode on CPU 0
[ 0.848025] isapnp: No Plug & Play device found
[ 0.849787] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.851451] brd: module loaded
[ 0.852227] loop: module loaded
[ 0.852353] input: Macintosh mouse button emulation as
/devices/virtual/input/input2
[ 0.852514] ata_piix 0000:00:1f.1: version 2.13
[ 0.852543] alloc irq_desc for 18 on node -1
[ 0.852546] alloc kstat_irqs on node -1
[ 0.852558] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.852639] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.852792] scsi0 : ata_piix
[ 0.852944] scsi1 : ata_piix
[ 0.855262] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
[ 0.855267] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
[ 0.856909] Fixed MDIO Bus: probed
[ 0.856972] PPP generic driver version 2.4.2
[ 0.857140] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.857175] alloc irq_desc for 23 on node -1
[ 0.857178] alloc kstat_irqs on node -1
[ 0.857189] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 0.857222] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.857227] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.857298] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus
number 1
[ 0.861299] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.861309] ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported
[ 0.861332] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xdff7bc00
[ 0.876091] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.876237] usb usb1: configuration #1 chosen from 1 choice
[ 0.876283] hub 1-0:1.0: USB hub found
[ 0.876297] hub 1-0:1.0: 6 ports detected
[ 0.876393] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.876427] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.876500] alloc irq_desc for 16 on node -1
[ 0.876504] alloc kstat_irqs on node -1
[ 0.876514] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.876527] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.876532] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.876589] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus
number 2
[ 0.876628] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000e400
[ 0.876744] usb usb2: configuration #1 chosen from 1 choice
[ 0.876781] hub 2-0:1.0: USB hub found
[ 0.876797] hub 2-0:1.0: 2 ports detected
[ 0.876855] alloc irq_desc for 19 on node -1
[ 0.876858] alloc kstat_irqs on node -1
[ 0.876865] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.876874] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.876879] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.876921] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus
number 3
[ 0.876956] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e800
[ 0.877070] usb usb3: configuration #1 chosen from 1 choice
[ 0.877108] hub 3-0:1.0: USB hub found
[ 0.877122] hub 3-0:1.0: 2 ports detected
[ 0.877177] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.877186] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.877191] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.877240] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus
number 4
[ 0.877273] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ec00
[ 0.877388] usb usb4: configuration #1 chosen from 1 choice
[ 0.877424] hub 4-0:1.0: USB hub found
[ 0.877438] hub 4-0:1.0: 2 ports detected
[ 0.877752] PNP: No PS/2 controller found. Probing ports directly.
[ 0.878623] i8042.c: No controller found.
[ 0.878701] mice: PS/2 mouse device common for all mice
[ 0.878834] rtc_cmos 00:04: RTC can wake from S4
[ 0.878889] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.878919] rtc0: alarms up to one month, y3k, 114 bytes nvram
[ 0.879084] device-mapper: uevent: version 1.0.3
[ 0.879258] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised:
dm-de...@redhat.com
[ 0.879344] device-mapper: multipath: version 1.1.0 loaded
[ 0.879349] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.879699] EISA: Probing bus 0 at eisa.0
[ 0.879747] EISA: Detected 0 cards.
[ 0.879820] cpuidle: using governor ladder
[ 0.879824] cpuidle: using governor menu
[ 0.880579] TCP cubic registered
[ 0.880758] NET: Registered protocol family 10
[ 0.881350] lo: Disabled Privacy Extensions
[ 0.881928] NET: Registered protocol family 17
[ 0.881958] Bluetooth: L2CAP ver 2.13
[ 0.881961] Bluetooth: L2CAP socket layer initialized
[ 0.881965] Bluetooth: SCO (Voice Link) ver 0.6
[ 0.881967] Bluetooth: SCO socket layer initialized
[ 0.882035] Bluetooth: RFCOMM TTY layer initialized
[ 0.882040] Bluetooth: RFCOMM socket layer initialized
[ 0.882042] Bluetooth: RFCOMM ver 1.11
[ 0.882095] Using IPI No-Shortcut mode
[ 0.882199] PM: Resume from disk failed.
[ 0.882218] registered taskstats version 1
[ 0.882350] Magic number: 10:794:223
[ 0.882448] rtc_cmos 00:04: setting system clock to 2010-01-08 10:12:32 UTC
(1262945552)
[ 0.882452] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.882455] EDD information not available.
[ 1.008632] ata2.00: ATAPI: CRN-8243B, 2.03, max UDMA/33
[ 1.016467] ata2.00: configured for UDMA/33
[ 1.072436] ata1.00: ATA-6: ST340012A, 3.31, max UDMA/100
[ 1.072441] ata1.00: 78140160 sectors, multi 16: LBA
[ 1.088356] ata1.00: configured for UDMA/100
[ 1.088532] scsi 0:0:0:0: Direct-Access ATA ST340012A 3.31
PQ: 0 ANSI: 5
[ 1.088732] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.088791] sd 0:0:0:0: [sda] 78140160 512-byte logical blocks: (40.0
GB/37.2 GiB)
[ 1.088859] sd 0:0:0:0: [sda] Write Protect is off
[ 1.088864] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.088898] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 1.089092] sda:
[ 1.089722] scsi 1:0:0:0: CD-ROM GoldStar CD-ROM CRN-8243B 2.03
PQ: 0 ANSI: 5
[ 1.091819] sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
[ 1.091825] Uniform CD-ROM driver Revision: 3.20
[ 1.091955] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.092046] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.095733] sda1 sda2 < sda5 >
[ 1.114061] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.114088] Freeing unused kernel memory: 544k freed
[ 1.115033] Write protecting the kernel text: 4592k
[ 1.115108] Write protecting the kernel read-only data: 1836k
[ 1.422094] Linux agpgart interface v0.103
[ 1.427111] agpgart-intel 0000:00:00.0: Intel 830M Chipset
[ 1.427300] agpgart-intel 0000:00:00.0: detected 8060K stolen memory
[ 1.440154] usb 2-1: new low speed USB device using uhci_hcd and address 2
[ 1.518448] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 1.518455] e100: Copyright(c) 1999-2006 Intel Corporation
[ 1.518538] alloc irq_desc for 20 on node -1
[ 1.518542] alloc kstat_irqs on node -1
[ 1.518554] e100 0000:03:08.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 1.544735] e100 0000:03:08.0: PME# disabled
[ 1.545087] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xd0000000
[ 1.645065] e100: eth0: e100_probe: addr 0xdfdff000, irq 20, MAC addr
00:04:23:41:3b:82
[ 1.646882] [drm] Initialized drm 1.1.0 20060810
[ 1.669765] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.669775] i915 0000:00:02.0: setting latency timer to 64
[ 1.678544] usb 2-1: configuration #1 chosen from 1 choice
[ 1.707347] usbcore: registered new interface driver hiddev
[ 1.725498] input: CHICONY HP Basic USB Keyboard as
/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input3
[ 1.725788] generic-usb 0003:03F0:0024.0001: input,hidraw0: USB HID v1.10
Keyboard [CHICONY HP Basic USB Keyboard] on usb-0000:00:1d.0-1/input0
[ 1.725818] usbcore: registered new interface driver usbhid
[ 1.725823] usbhid: v2.6:USB HID core driver
[ 1.870175] [drm] fb0: inteldrmfb frame buffer device
[ 1.870192] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 1.962002] render error detected, EIR: 0x00000010
[ 1.962008] [drm:i915_handle_error] *ERROR* EIR stuck: 0x00000010, masking
[ 1.962019] render error detected, EIR: 0x00000010
[ 1.973198] [drm] DAC-5: set mode 1280x1024 16
[ 1.982682] Console: switching to colour frame buffer device 160x64
[ 2.056097] usb 2-2: new low speed USB device using uhci_hcd and address 3
[ 2.240324] usb 2-2: configuration #1 chosen from 1 choice
[ 2.264545] input: USB Optical Mouse as
/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input4
[ 2.264688] generic-usb 0003:0461:4D20.0002: input,hidraw1: USB HID v1.11
Mouse [USB Optical Mouse] on usb-0000:00:1d.0-2/input0
[ 2.628347] PM: Starting manual resume from disk
[ 2.628356] PM: Resume from partition 8:5
[ 2.628359] PM: Checking hibernation image.
[ 2.628653] PM: Resume from disk failed.
[ 2.654705] EXT4-fs (sda1): barriers enabled
[ 2.668307] kjournald2 starting: pid 313, dev sda1:8, commit interval 5
seconds
[ 2.668331] EXT4-fs (sda1): delayed allocation enabled
[ 2.668336] EXT4-fs: file extents enabled
[ 2.674711] EXT4-fs: mballoc enabled
[ 2.674739] EXT4-fs (sda1): mounted filesystem with ordered data mode
[ 3.436958] type=1505 audit(1262945555.053:2): operation="profile_load"
pid=336 name=/usr/share/gdm/guest-session/Xsession
[ 3.463545] type=1505 audit(1262945555.077:3): operation="profile_load"
pid=337 name=/sbin/dhclient3
[ 3.464458] type=1505 audit(1262945555.081:4): operation="profile_load"
pid=337 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 3.464847] type=1505 audit(1262945555.081:5): operation="profile_load"
pid=337 name=/usr/lib/connman/scripts/dhclient-script
[ 3.533035] type=1505 audit(1262945555.149:6): operation="profile_load"
pid=338 name=/usr/bin/evince
[ 3.546884] type=1505 audit(1262945555.161:7): operation="profile_load"
pid=338 name=/usr/bin/evince-previewer
[ 3.554994] type=1505 audit(1262945555.169:8): operation="profile_load"
pid=338 name=/usr/bin/evince-thumbnailer
[ 3.576428] type=1505 audit(1262945555.193:9): operation="profile_load"
pid=340 name=/usr/lib/cups/backend/cups-pdf
[ 3.577270] type=1505 audit(1262945555.193:10): operation="profile_load"
pid=340 name=/usr/sbin/cupsd
[ 13.605953] Adding 1469908k swap on /dev/sda5. Priority:-1 extents:1
across:1469908k
[ 13.627338] udev: starting version 147
[ 13.816216] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 13.832311] intel_rng: FWH not detected
[ 13.897750] lp: driver loaded but no devices found
[ 14.060027] EXT4-fs (sda1): internal journal on sda1:8
[ 14.438371] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 14.675970] alloc irq_desc for 17 on node -1
[ 14.675976] alloc kstat_irqs on node -1
[ 14.675988] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ
17
[ 14.676040] Intel ICH 0000:00:1f.5: setting latency timer to 64
[ 15.050033] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 15.064121] intel8x0_measure_ac97_clock: measured 59096 usecs (2798 samples)
[ 15.064128] intel8x0: clocking to 48663
[ 15.137714] __ratelimit: 3 callbacks suppressed
[ 15.137720] type=1505 audit(1262941966.753:12): operation="profile_replace"
pid=774 name=/usr/share/gdm/guest-session/Xsession
[ 15.183180] type=1505 audit(1262941966.797:13): operation="profile_replace"
pid=780 name=/sbin/dhclient3
[ 15.183895] type=1505 audit(1262941966.797:14): operation="profile_replace"
pid=780 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 15.206971] type=1505 audit(1262941966.821:15): operation="profile_replace"
pid=780 name=/usr/lib/connman/scripts/dhclient-script
[ 15.297059] type=1505 audit(1262941966.913:16): operation="profile_replace"
pid=782 name=/usr/bin/evince
[ 15.387988] type=1505 audit(1262941967.001:17): operation="profile_replace"
pid=782 name=/usr/bin/evince-previewer
[ 15.421232] type=1505 audit(1262941967.037:18): operation="profile_replace"
pid=782 name=/usr/bin/evince-thumbnailer
[ 15.479112] type=1505 audit(1262941967.093:19): operation="profile_replace"
pid=816 name=/usr/lib/cups/backend/cups-pdf
[ 15.479953] type=1505 audit(1262941967.093:20): operation="profile_replace"
pid=816 name=/usr/sbin/cupsd
[ 15.513187] type=1505 audit(1262941967.129:21): operation="profile_replace"
pid=825 name=/usr/sbin/tcpdump
[ 16.816262] e100: eth0 NIC Link is Up 100 Mbps Full Duplex
[ 16.816398] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 16.844009] ppdev: user-space parallel port driver
[ 26.956122] eth0: no IPv6 routers present
sozial...@sozial-pc:~$ sudo lspci
[sudo] password for sozial-pc:
00:00.0 Host bridge: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE DRAM
Controller/Host-Hub Interface (rev 01)
00:02.0 VGA compatible controller: Intel Corporation 82845G/GL[Brookdale-G]/GE
Chipset Integrated Graphics Device (rev 01)
00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M)
USB UHCI Controller #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M)
USB UHCI Controller #2 (rev 01)
00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M)
USB UHCI Controller #3 (rev 01)
00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI
Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 81)
00:1f.0 ISA bridge: Intel Corporation 82801DB/DBL (ICH4/ICH4-L) LPC Interface
Bridge (rev 01)
00:1f.1 IDE interface: Intel Corporation 82801DB (ICH4) IDE Controller (rev 01)
00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus
Controller (rev 01)
00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 01)
03:08.0 Ethernet controller: Intel Corporation 82801DB PRO/100 VE (LOM)
Ethernet Controller (rev 81)
sozial...@sozial-pc:~$
Ubuntu 2.6.31-16.53-generic-pae
EVO D510 EPC
HEWLETT PACKARD
PRODUCT ID: X1029T #ABD Compaq
ProblemType: Bug
Architecture: i386
AudioDevicesInUse:
USER PID ACCESS COMMAND
/dev/snd/controlC0: sozial-pc 1205 F.... pulseaudio
CRDA: Error: [Errno 2] No such file or directory
Card0.Amixer.info:
Card hw:0 'I82801DBICH4'/'Intel 82801DB-ICH4 with AD1981A at irq 17'
Mixer name : 'Analog Devices AD1981A'
Components : 'AC97a:41445372'
Controls : 25
Simple ctrls : 17
CurrentDmesg:
[ 16.816262] e100: eth0 NIC Link is Up 100 Mbps Full Duplex
[ 16.816398] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 16.844009] ppdev: user-space parallel port driver
[ 26.956122] eth0: no IPv6 routers present
Date: Fri Jan 8 10:54:54 2010
DistroRelease: Ubuntu 9.10
HibernationDevice: RESUME=UUID=0cf4eaa7-0af2-446c-99d5-46cc4b2de9fc
InstallationMedia: Ubuntu 9.10 "Karmic Koala" - Release i386 (20091028.5)
IwConfig:
lo no wireless extensions.
eth0 no wireless extensions.
MachineType: COMPAQ Compaq Evo D510 e-pc
Package: linux-image-2.6.31-16-generic-pae 2.6.31-16.53
ProcCmdLine: BOOT_IMAGE=/boot/vmlinuz-2.6.31-16-generic-pae
root=UUID=d8704dcc-d2c6-4770-8521-f35dcab84434 ro quiet splash
ProcEnviron:
LANG=de_AT.UTF-8
SHELL=/bin/bash
ProcVersionSignature: Ubuntu 2.6.31-16.53-generic-pae
RelatedPackageVersions:
linux-backports-modules-2.6.31-16-generic-pae N/A
linux-firmware 1.25
RfKill:
SourcePackage: linux
Uname: Linux 2.6.31-16-generic-pae i686
XsessionErrors:
(gnome-settings-daemon:1293): GLib-CRITICAL **: g_propagate_error: assertion
`src != NULL' failed
(gnome-settings-daemon:1293): GLib-CRITICAL **: g_propagate_error: assertion
`src != NULL' failed
(nautilus:1371): Eel-CRITICAL **: eel_preferences_get_boolean: assertion
`preferences_is_initialized ()' failed
(polkit-gnome-authentication-agent-1:1416): GLib-CRITICAL **:
g_once_init_leave: assertion `initialization_value != 0' failed
dmi.bios.date: 02/21/2003
dmi.bios.vendor: American Megatrends Inc.
dmi.bios.version: Version JK.01.05
dmi.board.name: 0838h
dmi.board.vendor: COMPAQ
dmi.board.version: A07
dmi.chassis.type: 15
dmi.chassis.vendor: COMPAQ
dmi.chassis.version: JK.01.05
dmi.modalias:
dmi:bvnAmericanMegatrendsInc.:bvrVersionJK.01.05:bd02/21/2003:svnCOMPAQ:pnCompaqEvoD510e-pc:pvrJK.01.05:rvnCOMPAQ:rn0838h:rvrA07:cvnCOMPAQ:ct15:cvrJK.01.05:
dmi.product.name: Compaq Evo D510 e-pc
dmi.product.version: JK.01.05
dmi.sys.vendor: COMPAQ
** Affects: linux (Ubuntu)
Importance: Undecided
Status: New
** Tags: apport-bug i386
--
Compaq Evo a great many starting attempts fail, for screen remain black without
evident reason.
https://bugs.launchpad.net/bugs/504675
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
