** Description changed: This sound card worked perfectly until the 2.6.20-9 kernel release with the new ALSA drivers, and still works under 2.6.20-8, from reports I've read on the Ubuntu forums. However, under 2.6.20-9, the audio is barely audible, and in order to have audio output from Amarok audible, I have to turn the physical volume control on my notebook all the way up, make sure all the mixer settings are all the way up and that the equalizer in Amarok has been set to where all the sliders are maxxed-out. KDE system notifications are barely audible. - [EMAIL PROTECTED]:~$ tail -2 /proc/asound/oss/sndstat - Mixers: - 0: Realtek ALC861 - [EMAIL PROTECTED]:~$ amixer - Simple mixer control 'Master',0 - Capabilities: pswitch - Playback channels: Front Left - Front Right - Mono: - Front Left: Playback [on] - Front Right: Playback [on] - Simple mixer control 'PCM',0 - Capabilities: pvolume - Playback channels: Front Left - Front Right - Limits: Playback 0 - 255 - Mono: - Front Left: Playback 255 [100%] [0.00dB] - Front Right: Playback 255 [100%] [0.00dB] - Simple mixer control 'Front Mic',0 - Capabilities: cswitch cswitch-joined cswitch-exclusive - Capture exclusive group: 0 - Capture channels: Mono - Mono: Capture [off] - Simple mixer control 'Line',0 - Capabilities: cswitch cswitch-joined cswitch-exclusive - Capture exclusive group: 0 - Capture channels: Mono - Mono: Capture [off] - Simple mixer control 'CD',0 - Capabilities: cswitch cswitch-joined cswitch-exclusive - Capture exclusive group: 0 - Capture channels: Mono - Mono: Capture [off] - Simple mixer control 'Mic',0 - Capabilities: pvolume pswitch cswitch cswitch-joined cswitch-exclusive - Capture exclusive group: 0 - Playback channels: Front Left - Front Right - Capture channels: Mono - Limits: Playback 0 - 23 - Mono: Capture [off] - Front Left: Playback 2 [9%] [-30.00dB] [off] - Front Right: Playback 2 [9%] [-30.00dB] [off] - Simple mixer control 'Capture',0 - Capabilities: cvolume cswitch - Capture channels: Front Left - Front Right - Limits: Capture 0 - 13 - Front Left: Capture 13 [100%] [33.00dB] [off] - Front Right: Capture 13 [100%] [33.00dB] [off] - Simple mixer control 'Mixer',0 - Capabilities: cswitch cswitch-joined cswitch-exclusive - Capture exclusive group: 0 - Capture channels: Mono - Mono: Capture [on] - Simple mixer control 'Caller ID',0 - Capabilities: pswitch pswitch-joined - Playback channels: Mono - Mono: Playback [off] - Simple mixer control 'Off-hook',0 - Capabilities: pswitch pswitch-joined - Playback channels: Mono - Mono: Playback [off] - [EMAIL PROTECTED]:~$ lspci -nv - 00:00.0 0600: 8086:27a0 (rev 03) - Subsystem: 1179:ff10 - Flags: bus master, fast devsel, latency 0 - Capabilities: <access denied> + [edited at 9:46 PM, GMT -6 for clarity] - 00:02.0 0300: 8086:27a2 (rev 03) (prog-if 00 [VGA]) - Subsystem: 1179:ff10 - Flags: bus master, fast devsel, latency 0, IRQ 17 - Memory at f0a00000 (32-bit, non-prefetchable) [size=512K] - I/O ports at 1800 [size=8] - Memory at d0000000 (32-bit, prefetchable) [size=256M] - Memory at f0b00000 (32-bit, non-prefetchable) [size=256K] - Capabilities: <access denied> + In response to Andrew's request to post debug information separately, I + have done so. If any other information is needed, please let me know. - 00:02.1 0380: 8086:27a6 (rev 03) - Subsystem: 1179:ff10 - Flags: bus master, fast devsel, latency 0 - Memory at f0a80000 (32-bit, non-prefetchable) [size=512K] - Capabilities: <access denied> - - 00:1b.0 0403: 8086:27d8 (rev 02) - Subsystem: 1179:ff10 - Flags: bus master, fast devsel, latency 0, IRQ 22 - Memory at f0b40000 (64-bit, non-prefetchable) [size=16K] - Capabilities: <access denied> - - 00:1c.0 0604: 8086:27d0 (rev 02) (prog-if 00 [Normal decode]) - Flags: bus master, fast devsel, latency 0 - Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 - Capabilities: <access denied> - - 00:1c.1 0604: 8086:27d2 (rev 02) (prog-if 00 [Normal decode]) - Flags: bus master, fast devsel, latency 0 - Bus: primary=00, secondary=03, subordinate=04, sec-latency=0 - I/O behind bridge: 00002000-00002fff - Memory behind bridge: f0700000-f07fffff - Prefetchable memory behind bridge: 00000000f0200000-00000000f03fffff - Capabilities: <access denied> - - 00:1c.2 0604: 8086:27d4 (rev 02) (prog-if 00 [Normal decode]) - Flags: bus master, fast devsel, latency 0 - Bus: primary=00, secondary=05, subordinate=06, sec-latency=0 - I/O behind bridge: 00003000-00003fff - Memory behind bridge: f0800000-f08fffff - Prefetchable memory behind bridge: 00000000f0400000-00000000f05fffff - Capabilities: <access denied> - - 00:1d.0 0c03: 8086:27c8 (rev 02) (prog-if 00 [UHCI]) - Subsystem: 1179:ff10 - Flags: bus master, medium devsel, latency 0, IRQ 19 - I/O ports at 1820 [size=32] - - 00:1d.1 0c03: 8086:27c9 (rev 02) (prog-if 00 [UHCI]) - Subsystem: 1179:ff10 - Flags: bus master, medium devsel, latency 0, IRQ 20 - I/O ports at 1840 [size=32] - - 00:1d.2 0c03: 8086:27ca (rev 02) (prog-if 00 [UHCI]) - Subsystem: 1179:ff10 - Flags: bus master, medium devsel, latency 0, IRQ 18 - I/O ports at 1860 [size=32] - - 00:1d.3 0c03: 8086:27cb (rev 02) (prog-if 00 [UHCI]) - Subsystem: 1179:ff10 - Flags: bus master, medium devsel, latency 0, IRQ 17 - I/O ports at 1880 [size=32] - - 00:1d.7 0c03: 8086:27cc (rev 02) (prog-if 20 [EHCI]) - Subsystem: 1179:ff10 - Flags: bus master, medium devsel, latency 0, IRQ 19 - Memory at f0d44000 (32-bit, non-prefetchable) [size=1K] - Capabilities: <access denied> - - 00:1e.0 0604: 8086:2448 (rev e2) (prog-if 01 [Subtractive decode]) - Flags: bus master, fast devsel, latency 0 - Bus: primary=00, secondary=07, subordinate=0b, sec-latency=64 - I/O behind bridge: 00004000-00004fff - Memory behind bridge: f0900000-f09fffff - Prefetchable memory behind bridge: 0000000030000000-0000000033ffffff - Capabilities: <access denied> - - 00:1f.0 0601: 8086:27b9 (rev 02) - Subsystem: 1179:ff10 - Flags: bus master, medium devsel, latency 0 - Capabilities: <access denied> - - 00:1f.2 0101: 8086:27c4 (rev 02) (prog-if 80 [Master]) - Subsystem: 1179:ff10 - Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 20 - I/O ports at 01f0 [size=8] - I/O ports at 03f4 [size=1] - I/O ports at 0170 [size=8] - I/O ports at 0374 [size=1] - I/O ports at 18b0 [size=16] - Capabilities: <access denied> - - 00:1f.3 0c05: 8086:27da (rev 02) - Subsystem: 1179:ff10 - Flags: medium devsel, IRQ 10 - I/O ports at 18c0 [size=32] - - 05:00.0 0280: 8086:4222 (rev 02) - Subsystem: 8086:1040 - Flags: bus master, fast devsel, latency 0, IRQ 18 - Memory at f0800000 (32-bit, non-prefetchable) [size=4K] - Capabilities: <access denied> - - 07:06.0 0607: 104c:8039 - Subsystem: 1179:ff10 - Flags: bus master, medium devsel, latency 168, IRQ 18 - Memory at f0907000 (32-bit, non-prefetchable) [size=4K] - Bus: primary=07, secondary=08, subordinate=0b, sec-latency=176 - Memory window 0: 30000000-33fff000 (prefetchable) - Memory window 1: 34000000-37fff000 - I/O window 0: 00004400-000044ff - I/O window 1: 00004800-000048ff - 16-bit legacy interface ports at 0001 - - 07:06.1 0c00: 104c:803a (prog-if 10 [OHCI]) - Subsystem: 1179:ff10 - Flags: bus master, medium devsel, latency 128, IRQ 16 - Memory at f0906000 (32-bit, non-prefetchable) [size=2K] - Memory at f0900000 (32-bit, non-prefetchable) [size=16K] - Capabilities: <access denied> - - 07:06.2 0180: 104c:803b - Subsystem: 1179:ff10 - Flags: bus master, medium devsel, latency 128, IRQ 18 - Memory at f0904000 (32-bit, non-prefetchable) [size=4K] - Capabilities: <access denied> - - 07:06.3 0805: 104c:803c (prog-if 01) - Subsystem: 1179:ff10 - Flags: bus master, medium devsel, latency 128, IRQ 18 - Memory at f0906800 (32-bit, non-prefetchable) [size=256] - Capabilities: <access denied> - - 07:08.0 0200: 8086:1092 (rev 02) - Subsystem: 1179:ff10 - Flags: bus master, medium devsel, latency 66, IRQ 21 - Memory at f0905000 (32-bit, non-prefetchable) [size=4K] - I/O ports at 4000 [size=64] - Capabilities: <access denied> - - [EMAIL PROTECTED]:~$ asoundconf list - Names of available sound cards: - Intel - [EMAIL PROTECTED]:~$ cat /etc/asound.conf ~/.asoundrc* - cat: /etc/asound.conf: No such file or directory - cat: /home/caleb/.asoundrc*: No such file or directory - [EMAIL PROTECTED]:~$ dmesg - [ 0.000000] Linux version 2.6.20-9-generic ([EMAIL PROTECTED]) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu3)) #2 SMP Mon Feb 26 03:01:44 UTC 2007 (Ubuntu 2.6.20-9.16-generic) - [ 0.000000] BIOS-provided physical RAM map: - [ 0.000000] sanitize start - [ 0.000000] sanitize end - [ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009f800 end: 000000000009f800 type: 1 - [ 0.000000] copy_e820_map() type is E820_RAM - [ 0.000000] copy_e820_map() start: 000000000009f800 size: 0000000000000800 end: 00000000000a0000 type: 2 - [ 0.000000] copy_e820_map() start: 00000000000dc000 size: 0000000000024000 end: 0000000000100000 type: 2 - [ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000001f570000 end: 000000001f670000 type: 1 - [ 0.000000] copy_e820_map() type is E820_RAM - [ 0.000000] copy_e820_map() start: 000000001f670000 size: 0000000000090000 end: 000000001f700000 type: 4 - [ 0.000000] copy_e820_map() start: 000000001f700000 size: 0000000000900000 end: 0000000020000000 type: 2 - [ 0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000000010000 end: 00000000fec10000 type: 2 - [ 0.000000] copy_e820_map() start: 00000000fed00000 size: 0000000000000400 end: 00000000fed00400 type: 2 - [ 0.000000] copy_e820_map() start: 00000000fed14000 size: 0000000000006000 end: 00000000fed1a000 type: 2 - [ 0.000000] copy_e820_map() start: 00000000fed1c000 size: 0000000000074000 end: 00000000fed90000 type: 2 - [ 0.000000] copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2 - [ 0.000000] copy_e820_map() start: 00000000ff000000 size: 0000000001000000 end: 0000000100000000 type: 2 - [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) - [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) - [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) - [ 0.000000] BIOS-e820: 0000000000100000 - 000000001f670000 (usable) - [ 0.000000] BIOS-e820: 000000001f670000 - 000000001f700000 (ACPI NVS) - [ 0.000000] BIOS-e820: 000000001f700000 - 0000000020000000 (reserved) - [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) - [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) - [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) - [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) - [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) - [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) - [ 0.000000] 0MB HIGHMEM available. - [ 0.000000] 502MB LOWMEM available. - [ 0.000000] found SMP MP-table at 000f6a10 - [ 0.000000] Entering add_active_range(0, 0, 128624) 0 entries of 256 used - [ 0.000000] Zone PFN ranges: - [ 0.000000] DMA 0 -> 4096 - [ 0.000000] Normal 4096 -> 128624 - [ 0.000000] HighMem 128624 -> 128624 - [ 0.000000] early_node_map[1] active PFN ranges - [ 0.000000] 0: 0 -> 128624 - [ 0.000000] On node 0 totalpages: 128624 - [ 0.000000] DMA zone: 32 pages used for memmap - [ 0.000000] DMA zone: 0 pages reserved - [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 - [ 0.000000] Normal zone: 972 pages used for memmap - [ 0.000000] Normal zone: 123556 pages, LIFO batch:31 - [ 0.000000] HighMem zone: 0 pages used for memmap - [ 0.000000] DMI present. - [ 0.000000] ACPI: RSDP (v002 TOSINV ) @ 0x000f6960 - [ 0.000000] ACPI: XSDT (v001 TOSINV TOSINV00 0x06040000 INV 0x00000000) @ 0x1f67875a - [ 0.000000] ACPI: FADT (v003 TOSINV TOSINV00 0x06040000 ALAN 0x00000001) @ 0x1f681bf8 - [ 0.000000] ACPI: MADT (v001 INTEL CALISTGA 0x06040000 LOHR 0x0000005a) @ 0x1f681cec - [ 0.000000] ACPI: HPET (v001 INTEL CALISTGA 0x06040000 LOHR 0x0000005a) @ 0x1f681d54 - [ 0.000000] ACPI: MCFG (v001 INTEL CALISTGA 0x06040000 LOHR 0x0000005a) @ 0x1f681d8c - [ 0.000000] ACPI: TCPA (v001 PTLTD CALISTGA 0x06040000 PTL 0x00000001) @ 0x1f681dc8 - [ 0.000000] ACPI: MADT (v001 TOSINV APIC 0x06040000 INV 0x00000000) @ 0x1f681dfa - [ 0.000000] ACPI: SLIC (v001 TOSINV TOSINV00 0x06040000 INV 0x00000000) @ 0x1f681e62 - [ 0.000000] ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x1f681fd8 - [ 0.000000] ACPI: SSDT (v001 SataRe SataPri 0x00001000 INTL 0x20050624) @ 0x1f679e62 - [ 0.000000] ACPI: SSDT (v001 SataRe SataSec 0x00001000 INTL 0x20050624) @ 0x1f6797d0 - [ 0.000000] ACPI: SSDT (v001 PmRef Cpu0Tst 0x00003000 INTL 0x20050624) @ 0x1f678d72 - [ 0.000000] ACPI: SSDT (v001 PmRef Cpu1Tst 0x00003000 INTL 0x20050624) @ 0x1f678ccc - [ 0.000000] ACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL 0x20050624) @ 0x1f6787e6 - [ 0.000000] ACPI: DSDT (v002 TOSINV CALISTGA 0x06040000 INTL 0x20050624) @ 0x00000000 - [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 - [ 0.000000] ACPI: Local APIC address 0xfee00000 - [ 0.000000] ACPI: 2 duplicate APIC table ignored. - [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) - [ 0.000000] Processor #0 6:14 APIC version 20 - [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) - [ 0.000000] Processor #1 6:14 APIC version 20 - [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) - [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) - [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) - [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 - [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) - [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) - [ 0.000000] ACPI: IRQ0 used by override. - [ 0.000000] ACPI: IRQ2 used by override. - [ 0.000000] ACPI: IRQ9 used by override. - [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs - [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 - [ 0.000000] Using ACPI (MADT) for SMP configuration information - [ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000) - [ 0.000000] Detected 1662.646 MHz processor. - [ 15.137924] Built 1 zonelists. Total pages: 127620 - [ 15.137929] Kernel command line: root=UUID=7d031e61-37db-4321-aeb6-be42c1705740 ro quiet splash - [ 15.138191] mapped APIC to ffffd000 (fee00000) - [ 15.138195] mapped IOAPIC to ffffc000 (fec00000) - [ 15.138199] Enabling fast FPU save and restore... done. - [ 15.138204] Enabling unmasked SIMD FPU exception support... done. - [ 15.138214] Initializing CPU#0 - [ 15.138300] PID hash table entries: 2048 (order: 11, 8192 bytes) - [ 15.139999] Console: colour VGA+ 80x25 - [ 15.140169] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) - [ 15.140440] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) - [ 15.157944] Memory: 499292k/514496k available (1979k kernel code, 14540k reserved, 882k data, 324k init, 0k highmem) - [ 15.157960] virtual kernel memory layout: - [ 15.157962] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB) - [ 15.157964] pkmap : 0xff800000 - 0xffc00000 (4096 kB) - [ 15.157966] vmalloc : 0xe0000000 - 0xff7fe000 ( 503 MB) - [ 15.157968] lowmem : 0xc0000000 - 0xdf670000 ( 502 MB) - [ 15.157971] .init : 0xc03d1000 - 0xc0422000 ( 324 kB) - [ 15.157973] .data : 0xc02eed54 - 0xc03cb6d4 ( 882 kB) - [ 15.157975] .text : 0xc0100000 - 0xc02eed54 (1979 kB) - [ 15.157981] Checking if this processor honours the WP bit even in supervisor mode... Ok. - [ 15.158202] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 - [ 15.158210] hpet0: 3 64-bit timers, 14318180 Hz - [ 15.159217] Using HPET for base-timer - [ 15.238086] Calibrating delay using timer specific routine.. 3329.49 BogoMIPS (lpj=6658990) - [ 15.238148] Security Framework v1.0.0 initialized - [ 15.238157] SELinux: Disabled at boot. - [ 15.238180] Mount-cache hash table entries: 512 - [ 15.238370] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000 - [ 15.238383] monitor/mwait feature present. - [ 15.238386] using mwait in idle threads. - [ 15.238392] CPU: L1 I cache: 32K, L1 D cache: 32K - [ 15.238397] CPU: L2 cache: 2048K - [ 15.238401] CPU: Physical Processor ID: 0 - [ 15.238404] CPU: Processor Core ID: 0 - [ 15.238409] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c1a9 00000000 00000000 - [ 15.238437] Checking 'hlt' instruction... OK. - [ 15.254219] SMP alternatives: switching to UP code - [ 15.254614] ACPI: Core revision 20060707 - [ 15.315817] CPU0: Intel Genuine Intel(R) CPU T2300 @ 1.66GHz stepping 08 - [ 15.315849] SMP alternatives: switching to SMP code - [ 15.315893] Booting processor 1/1 eip 3000 - [ 15.326461] Initializing CPU#1 - [ 15.405826] Calibrating delay using timer specific routine.. 3325.15 BogoMIPS (lpj=6650316) - [ 15.405837] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000 - [ 15.405845] monitor/mwait feature present. - [ 15.405850] CPU: L1 I cache: 32K, L1 D cache: 32K - [ 15.405854] CPU: L2 cache: 2048K - [ 15.405857] CPU: Physical Processor ID: 0 - [ 15.405860] CPU: Processor Core ID: 1 - [ 15.405863] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c1a9 00000000 00000000 - [ 15.406604] CPU1: Intel Genuine Intel(R) CPU T2300 @ 1.66GHz stepping 08 - [ 15.406639] Total of 2 processors activated (6654.65 BogoMIPS). - [ 15.406849] ENABLING IO-APIC IRQs - [ 15.407083] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 - [ 15.553600] checking TSC synchronization across 2 CPUs: passed. - [ 0.003997] Brought up 2 CPUs - [ 0.184584] migration_cost=235 - [ 0.185001] Booting paravirtualized kernel on bare hardware - [ 0.185122] Time: 14:05:41 Date: 02/01/107 - [ 0.185165] NET: Registered protocol family 16 - [ 0.185296] EISA bus registered - [ 0.185307] ACPI: bus type pci registered - [ 0.185319] PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved - [ 0.185382] PCI: Not using MMCONFIG. - [ 0.185597] PCI: PCI BIOS revision 2.10 entry at 0xfd604, last bus=7 - [ 0.185600] PCI: Using configuration type 1 - [ 0.185604] Setting up standard PCI resources - [ 0.193317] ACPI: Interpreter enabled - [ 0.193322] ACPI: Using IOAPIC for interrupt routing - [ 0.197517] ACPI: PCI Root Bridge [PCI0] (0000:00) - [ 0.197524] PCI: Probing PCI hardware (bus 00) - [ 0.200457] Boot video device is 0000:00:02.0 - [ 0.201236] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO - [ 0.201243] PCI quirk: region 1180-11bf claimed by ICH6 GPIO - [ 0.202454] PCI: Firmware left 0000:07:08.0 e100 interrupts enabled, disabling - [ 0.202559] PCI: Transparent bridge - 0000:00:1e.0 - [ 0.202655] PCI: Bus #08 (-#0b) is hidden behind transparent bridge #07 (-#07) (try 'pci=assign-busses') - [ 0.202660] Please report the result to linux-kernel to fix this permanently - [ 0.202744] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] - [ 0.369052] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] - [ 0.369526] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] - [ 0.369995] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] - [ 0.372172] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] - [ 0.404145] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15) - [ 0.404603] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15) - [ 0.405057] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 - [ 0.405513] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 - [ 0.405968] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15) - [ 0.406419] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. - [ 0.406876] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15) - [ 0.407332] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15) - [ 0.483790] ACPI: Power Resource [FN00] (off) - [ 0.484040] Linux Plug and Play Support v0.97 (c) Adam Belay - [ 0.484053] pnp: PnP ACPI init - [ 0.579443] pnp: PnP ACPI: found 10 devices - [ 0.579451] PnPBIOS: Disabled by ACPI PNP - [ 0.579518] PCI: Using ACPI for IRQ routing - [ 0.579523] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report - [ 0.614350] PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0 - [ 0.614359] PCI: Bridge: 0000:00:1c.0 - [ 0.614362] IO window: disabled. - [ 0.614369] MEM window: disabled. - [ 0.614375] PREFETCH window: disabled. - [ 0.614383] PCI: Bridge: 0000:00:1c.1 - [ 0.614388] IO window: 2000-2fff - [ 0.614397] MEM window: f0700000-f07fffff - [ 0.614404] PREFETCH window: f0200000-f03fffff - [ 0.614412] PCI: Bridge: 0000:00:1c.2 - [ 0.614416] IO window: 3000-3fff - [ 0.614425] MEM window: f0800000-f08fffff - [ 0.614432] PREFETCH window: f0400000-f05fffff - [ 0.614449] PCI: Bus 8, cardbus bridge: 0000:07:06.0 - [ 0.614453] IO window: 00004400-000044ff - [ 0.614460] IO window: 00004800-000048ff - [ 0.614467] PREFETCH window: 30000000-33ffffff - [ 0.614474] MEM window: 34000000-37ffffff - [ 0.614480] PCI: Bridge: 0000:00:1e.0 - [ 0.614485] IO window: 4000-4fff - [ 0.614493] MEM window: f0900000-f09fffff - [ 0.614500] PREFETCH window: 30000000-33ffffff - [ 0.614538] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 16 - [ 0.614548] PCI: Setting latency timer of device 0000:00:1c.0 to 64 - [ 0.614579] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 17 - [ 0.614588] PCI: Setting latency timer of device 0000:00:1c.1 to 64 - [ 0.614618] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18 - [ 0.614627] PCI: Setting latency timer of device 0000:00:1c.2 to 64 - [ 0.614645] PCI: Setting latency timer of device 0000:00:1e.0 to 64 - [ 0.614666] PCI: Enabling device 0000:07:06.0 (0000 -> 0003) - [ 0.614672] ACPI: PCI Interrupt 0000:07:06.0[A] -> GSI 18 (level, low) -> IRQ 18 - [ 0.614719] NET: Registered protocol family 2 - [ 0.659058] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) - [ 0.659175] TCP established hash table entries: 16384 (order: 5, 131072 bytes) - [ 0.659339] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) - [ 0.659423] TCP: Hash tables configured (established 16384 bind 8192) - [ 0.659427] TCP reno registered - [ 0.675147] checking if image is initramfs... it is - [ 1.705805] Freeing initrd memory: 6408k freed - [ 1.706065] Simple Boot Flag at 0x36 set to 0x1 - [ 1.706804] audit: initializing netlink socket (disabled) - [ 1.706828] audit(1172757942.128:1): initialized - [ 1.707090] VFS: Disk quotas dquot_6.5.1 - [ 1.707120] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) - [ 1.707192] io scheduler noop registered - [ 1.707196] io scheduler anticipatory registered - [ 1.707200] io scheduler deadline registered - [ 1.707219] io scheduler cfq registered (default) - [ 1.707558] PCI: Setting latency timer of device 0000:00:1c.0 to 64 - [ 1.707628] assign_interrupt_mode Found MSI capability - [ 1.707702] Allocate Port Service[0000:00:1c.0:pcie00] - [ 1.707762] Allocate Port Service[0000:00:1c.0:pcie02] - [ 1.707940] PCI: Setting latency timer of device 0000:00:1c.1 to 64 - [ 1.708010] assign_interrupt_mode Found MSI capability - [ 1.708065] Allocate Port Service[0000:00:1c.1:pcie00] - [ 1.708122] Allocate Port Service[0000:00:1c.1:pcie02] - [ 1.708288] PCI: Setting latency timer of device 0000:00:1c.2 to 64 - [ 1.708358] assign_interrupt_mode Found MSI capability - [ 1.708413] Allocate Port Service[0000:00:1c.2:pcie00] - [ 1.708464] Allocate Port Service[0000:00:1c.2:pcie02] - [ 1.708725] isapnp: Scanning for PnP cards... - [ 2.062162] isapnp: No Plug & Play device found - [ 2.100861] Real Time Clock Driver v1.12ac - [ 2.100964] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled - [ 2.101972] mice: PS/2 mouse device common for all mice - [ 2.102876] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize - [ 2.103108] input: Macintosh mouse button emulation as /class/input/input0 - [ 2.103170] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 - [ 2.103176] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx - [ 2.103546] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 - [ 2.106127] i8042.c: Detected active multiplexing controller, rev 1.1. - [ 2.107621] serio: i8042 KBD port at 0x60,0x64 irq 1 - [ 2.107628] serio: i8042 AUX0 port at 0x60,0x64 irq 12 - [ 2.107633] serio: i8042 AUX1 port at 0x60,0x64 irq 12 - [ 2.107638] serio: i8042 AUX2 port at 0x60,0x64 irq 12 - [ 2.107642] serio: i8042 AUX3 port at 0x60,0x64 irq 12 - [ 2.107784] EISA: Probing bus 0 at eisa.0 - [ 2.107794] Cannot allocate resource for EISA slot 1 - [ 2.107799] Cannot allocate resource for EISA slot 2 - [ 2.107803] Cannot allocate resource for EISA slot 3 - [ 2.107807] Cannot allocate resource for EISA slot 4 - [ 2.107832] EISA: Detected 0 cards. - [ 2.137935] TCP cubic registered - [ 2.137947] NET: Registered protocol family 1 - [ 2.137955] NET: Registered protocol family 8 - [ 2.137958] NET: Registered protocol family 20 - [ 2.138015] Starting balanced_irq - [ 2.138025] Using IPI No-Shortcut mode - [ 2.138183] ACPI: (supports S0 S3 S4 S5) - [ 2.138259] Magic number: 15:52:80 - [ 2.138599] Freeing unused kernel memory: 324k freed - [ 2.140737] Time: tsc clocksource has been installed. - [ 2.141273] input: AT Translated Set 2 keyboard as /class/input/input1 - [ 3.449431] Capability LSM initialized - [ 3.495686] ACPI: Transitioning device [FAN0] to D3 - [ 3.495692] ACPI: Transitioning device [FAN0] to D3 - [ 3.495698] ACPI: Fan [FAN0] (off) - [ 3.503078] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Ist] [20060707] - [ 3.503540] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Cst] [20060707] - [ 3.504539] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) - [ 3.504548] ACPI: Processor [CPU0] (supports 8 throttling states) - [ 3.505456] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Ist] [20060707] - [ 3.505834] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Cst] [20060707] - [ 3.506926] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) - [ 3.506935] ACPI: Processor [CPU1] (supports 8 throttling states) - [ 3.508321] ACPI: Thermal Zone [TZ00] (36 C) - [ 3.509220] ACPI: Invalid passive threshold - [ 3.510170] ACPI: Transitioning device [FAN0] to D0 - [ 3.510174] ACPI: Transitioning device [FAN0] to D0 - [ 3.510178] ACPI: Unable to turn cooling device [c147cfcc] 'on' - [ 3.510183] ACPI: Thermal Zone [TZ01] (34 C) - [ 3.776000] Time: hpet clocksource has been installed. - [ 4.232000] usbcore: registered new interface driver usbfs - [ 4.232000] usbcore: registered new interface driver hub - [ 4.232000] usbcore: registered new device driver usb - [ 4.236000] USB Universal Host Controller Interface driver v3.0 - [ 4.236000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19 - [ 4.236000] PCI: Setting latency timer of device 0000:00:1d.0 to 64 - [ 4.236000] uhci_hcd 0000:00:1d.0: UHCI Host Controller - [ 4.236000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 - [ 4.236000] uhci_hcd 0000:00:1d.0: irq 19, io base 0x00001820 - [ 4.236000] usb usb1: configuration #1 chosen from 1 choice - [ 4.236000] hub 1-0:1.0: USB hub found - [ 4.236000] hub 1-0:1.0: 2 ports detected - [ 4.288000] ieee1394: Initialized config rom entry `ip1394' - [ 4.340000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 20 - [ 4.340000] PCI: Setting latency timer of device 0000:00:1d.1 to 64 - [ 4.340000] uhci_hcd 0000:00:1d.1: UHCI Host Controller - [ 4.340000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 - [ 4.340000] uhci_hcd 0000:00:1d.1: irq 20, io base 0x00001840 - [ 4.340000] usb usb2: configuration #1 chosen from 1 choice - [ 4.340000] hub 2-0:1.0: USB hub found - [ 4.340000] hub 2-0:1.0: 2 ports detected - [ 4.368000] e100: Intel(R) PRO/100 Network Driver, 3.5.17-k2-NAPI - [ 4.368000] e100: Copyright(c) 1999-2006 Intel Corporation - [ 4.444000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 - [ 4.444000] PCI: Setting latency timer of device 0000:00:1d.2 to 64 - [ 4.444000] uhci_hcd 0000:00:1d.2: UHCI Host Controller - [ 4.444000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 - [ 4.444000] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860 - [ 4.444000] usb usb3: configuration #1 chosen from 1 choice - [ 4.444000] hub 3-0:1.0: USB hub found - [ 4.444000] hub 3-0:1.0: 2 ports detected - [ 4.548000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 17 - [ 4.548000] PCI: Setting latency timer of device 0000:00:1d.3 to 64 - [ 4.548000] uhci_hcd 0000:00:1d.3: UHCI Host Controller - [ 4.548000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 - [ 4.548000] uhci_hcd 0000:00:1d.3: irq 17, io base 0x00001880 - [ 4.548000] usb usb4: configuration #1 chosen from 1 choice - [ 4.548000] hub 4-0:1.0: USB hub found - [ 4.548000] hub 4-0:1.0: 2 ports detected - [ 4.652000] ACPI: PCI Interrupt 0000:07:06.1[B] -> GSI 17 (level, low) -> IRQ 16 - [ 4.704000] SCSI subsystem initialized - [ 4.704000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[f0906000-f09067ff] Max Packet=[2048] IR/IT contexts=[4/8] - [ 4.708000] ACPI: PCI Interrupt 0000:07:08.0[A] -> GSI 20 (level, low) -> IRQ 21 - [ 4.740000] e100: eth0: e100_probe: addr 0xf0905000, irq 21, MAC addr 00:A0:D1:37:01:53 - [ 4.740000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 19 - [ 4.740000] PCI: Setting latency timer of device 0000:00:1d.7 to 64 - [ 4.740000] ehci_hcd 0000:00:1d.7: EHCI Host Controller - [ 4.740000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 - [ 4.740000] ehci_hcd 0000:00:1d.7: debug port 1 - [ 4.740000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 - [ 4.740000] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xf0d44000 - [ 4.744000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 - [ 4.744000] usb usb5: configuration #1 chosen from 1 choice - [ 4.744000] hub 5-0:1.0: USB hub found - [ 4.744000] hub 5-0:1.0: 8 ports detected - [ 4.744000] libata version 2.00 loaded. - [ 4.852000] ata_piix 0000:00:1f.2: version 2.00ac7 - [ 4.852000] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] - [ 5.008000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 20 - [ 5.008000] PCI: Setting latency timer of device 0000:00:1f.2 to 64 - [ 5.008000] ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0x18B0 irq 14 - [ 5.008000] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18B8 irq 15 - [ 5.008000] scsi0 : ata_piix - [ 5.324000] ata1.00: ATA-7, max UDMA/100, 156301488 sectors: LBA48 NCQ (depth 0/32) - [ 5.324000] ata1.00: ata1: dev 0 multi count 16 - [ 5.484000] ata1.00: configured for UDMA/100 - [ 5.484000] scsi1 : ata_piix - [ 5.804000] ata2.00: ATAPI, max UDMA/33 - [ 5.968000] ata2.00: configured for UDMA/33 - [ 5.968000] scsi 0:0:0:0: Direct-Access ATA HTS541080G9SA00 MB4O PQ: 0 ANSI: 5 - [ 5.972000] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GMA-4082N HV02 PQ: 0 ANSI: 5 - [ 5.980000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00080da0d1370153] - [ 5.980000] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) - [ 5.980000] sda: Write Protect is off - [ 5.980000] sda: Mode Sense: 00 3a 00 00 - [ 5.980000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA - [ 5.980000] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) - [ 5.980000] sda: Write Protect is off - [ 5.980000] sda: Mode Sense: 00 3a 00 00 - [ 5.980000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA - [ 5.980000] sda: sda1 sda2 < sda5 > - [ 6.036000] sd 0:0:0:0: Attached scsi disk sda - [ 6.056000] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray - [ 6.056000] Uniform CD-ROM driver Revision: 3.20 - [ 6.056000] sr 1:0:0:0: Attached scsi CD-ROM sr0 - [ 6.060000] sd 0:0:0:0: Attached scsi generic sg0 type 0 - [ 6.060000] sr 1:0:0:0: Attached scsi generic sg1 type 5 - [ 6.272000] Attempting manual resume - [ 6.272000] swsusp: Resume From Partition 8:5 - [ 6.272000] PM: Checking swsusp image. - [ 6.272000] PM: Resume from disk failed. - [ 6.308000] kjournald starting. Commit interval 5 seconds - [ 6.308000] EXT3-fs: mounted filesystem with ordered data mode. - [ 18.068000] Linux agpgart interface v0.101 (c) Dave Jones - [ 18.088000] agpgart: Detected an Intel 945GM Chipset. - [ 18.088000] agpgart: Detected 7932K stolen memory. - [ 18.108000] agpgart: AGP aperture is 256M @ 0xd0000000 - [ 18.364000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 - [ 18.412000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 - [ 18.416000] NET: Registered protocol family 17 - [ 18.848000] sdhci: Secure Digital Host Controller Interface driver, 0.12 - [ 18.848000] sdhci: Copyright(c) Pierre Ossman - [ 18.848000] sdhci: SDHCI controller found at 0000:07:06.3 [104c:803c] (rev 0) - [ 18.848000] ACPI: PCI Interrupt 0000:07:06.3[A] -> GSI 18 (level, low) -> IRQ 18 - [ 18.848000] sdhci:slot0: Controller reports > 25 MHz base clock, but no high speed support. - [ 18.848000] mmc0: SDHCI at 0xf0906800 irq 18 DMA - [ 18.884000] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04713/0x0 - [ 18.884000] synaptics: Toshiba Satellite A105 detected, limiting rate to 40pps. - [ 18.920000] input: SynPS/2 Synaptics TouchPad as /class/input/input2 - [ 18.960000] iTCO_vendor_support: vendor-support=0 - [ 18.972000] ieee80211_crypt: registered algorithm 'NULL' - [ 18.984000] ieee80211: 802.11 data/management/control stack, git-1.1.13 - [ 18.984000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <[EMAIL PROTECTED]> - [ 18.988000] ACPI: PCI Interrupt 0000:07:06.2[A] -> GSI 18 (level, low) -> IRQ 18 - [ 18.988000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006) - [ 18.988000] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060) - [ 18.988000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) - [ 19.084000] intel_rng: FWH not detected - [ 19.092000] Yenta: CardBus bridge found at 0000:07:06.0 [1179:ff10] - [ 19.092000] Yenta: Enabling burst memory read transactions - [ 19.092000] Yenta: Using CSCINT to route CSC interrupts to PCI - [ 19.092000] Yenta: Routing CardBus interrupts to PCI - [ 19.092000] Yenta TI: socket 0000:07:06.0, mfunc 0x01a01b22, devctl 0x66 - [ 19.136000] ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.2.0mp - [ 19.136000] ipw3945: Copyright(c) 2003-2006 Intel Corporation - [ 19.324000] Yenta: ISA IRQ mask 0x0cf8, PCI irq 18 - [ 19.324000] Socket status: 30000006 - [ 19.324000] Yenta: Raising subordinate bus# of parent bus (#07) from #07 to #0b - [ 19.324000] pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff - [ 19.324000] cs: IO port probe 0x4000-0x4fff: clean. - [ 19.324000] pcmcia: parent PCI bridge Memory window: 0xf0900000 - 0xf09fffff - [ 19.324000] pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x33ffffff - [ 19.324000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22 - [ 19.324000] PCI: Setting latency timer of device 0000:00:1b.0 to 64 - [ 19.688000] cs: IO port probe 0x100-0x3af: clean. - [ 19.692000] cs: IO port probe 0x3e0-0x4ff: excluding 0x400-0x407 0x4d0-0x4d7 - [ 19.692000] cs: IO port probe 0x820-0x8ff: clean. - [ 19.692000] cs: IO port probe 0xc00-0xcf7: clean. - [ 19.692000] cs: IO port probe 0xa00-0xaff: clean. - [ 19.796000] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 18 - [ 19.796000] PCI: Setting latency timer of device 0000:05:00.0 to 64 - [ 19.796000] ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection - [ 20.516000] lp: driver loaded but no devices found - [ 20.580000] Adding 1477940k swap on /dev/disk/by-uuid/bfac0a8e-39f3-4f66-8575-8219540c17e7. Priority:-1 extents:1 across:1477940k - [ 20.668000] EXT3 FS on sda1, internal journal - [ 20.932000] hda_intel: azx_get_response timeout, switching to polling mode... - [ 21.656000] ipw3945: Detected geography ABG (11 802.11bg channels, 13 802.11a channels) - [ 32.876000] ipw3945: Radio Frequency Kill Switch is On: - [ 32.876000] Kill switch must be turned off for wireless networking to work. - [ 44.540000] ipw3945: Detected geography ABG (11 802.11bg channels, 13 802.11a channels) - [ 59.256000] NET: Registered protocol family 10 - [ 59.256000] lo: Disabled Privacy Extensions - [ 59.256000] ADDRCONF(NETDEV_UP): eth0: link is not ready - [ 74.580000] ADDRCONF(NETDEV_UP): eth1: link is not ready - [ 107.464000] ACPI: AC Adapter [ADP0] (off-line) - [ 107.596000] ACPI: Battery Slot [BAT0] (battery present) - [ 107.620000] input: Power Button (FF) as /class/input/input3 - [ 107.620000] ACPI: Power Button (FF) [PWRF] - [ 107.620000] input: Lid Switch as /class/input/input4 - [ 107.620000] ACPI: Lid Switch [LID] - [ 107.620000] input: Power Button (CM) as /class/input/input5 - [ 107.620000] ACPI: Power Button (CM) [PWRB] - [ 107.784000] Using specific hotkey driver - [ 107.880000] ACPI: Error installing notify handler - [ 107.880000] Device 'dock.0' does not have a release() function, it is broken and must be fixed. - [ 107.880000] BUG: at drivers/base/core.c:104 device_release() - [ 107.880000] [<c01ec459>] kobject_cleanup+0x49/0x90 - [ 107.880000] [<c01ec4a0>] kobject_release+0x0/0x10 - [ 107.880000] [<c01ed15b>] kref_put+0x2b/0xa0 - [ 107.880000] [<e0558723>] find_dock+0x1d0/0x1f0 [dock] - [ 107.880000] [<c021b17d>] acpi_ns_walk_namespace+0xf9/0x114 - [ 107.880000] [<c0219934>] acpi_walk_namespace+0x57/0x74 - [ 107.880000] [<e0558553>] find_dock+0x0/0x1f0 [dock] - [ 107.880000] [<e003f03c>] dock_init+0x3c/0x55 [dock] - [ 107.880000] [<e0558553>] find_dock+0x0/0x1f0 [dock] - [ 107.880000] [<c0143ded>] sys_init_module+0x15d/0x1ba0 - [ 107.880000] [<c0107a3d>] sys_mmap2+0xcd/0xd0 - [ 107.880000] [<c01031d0>] sysenter_past_esp+0x69/0xa9 - [ 107.880000] ======================= - [ 107.880000] No dock devices found. - [ 107.976000] ibm_acpi: ec object not found - [ 108.116000] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) - [ 108.116000] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) - [ 110.376000] ppdev: user-space parallel port driver - [ 111.044000] [drm] Initialized drm 1.1.0 20060810 - [ 111.092000] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 17 - [ 111.096000] [drm] Initialized i915 1.6.0 20060119 on minor 0 - [ 113.180000] apm: BIOS not found. - [ 119.956000] Bluetooth: Core ver 2.11 - [ 119.956000] NET: Registered protocol family 31 - [ 119.956000] Bluetooth: HCI device and connection manager initialized - [ 119.956000] Bluetooth: HCI socket layer initialized - [ 120.008000] Bluetooth: L2CAP ver 2.8 - [ 120.008000] Bluetooth: L2CAP socket layer initialized - [ 120.148000] Bluetooth: RFCOMM socket layer initialized - [ 120.148000] Bluetooth: RFCOMM TTY layer initialized - [ 120.148000] Bluetooth: RFCOMM ver 1.8 - [ 278.168000] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready - [ 288.840000] eth1: no IPv6 routers present - [EMAIL PROTECTED]:~$ cat /proc/interrupts - CPU0 CPU1 - 0: 401020 0 IO-APIC-edge timer - 1: 8122 0 IO-APIC-edge i8042 - 8: 8 0 IO-APIC-edge rtc - 9: 813 0 IO-APIC-fasteoi acpi - 12: 143743 0 IO-APIC-edge i8042 - 14: 19306 0 IO-APIC-edge libata - 15: 16343 0 IO-APIC-edge libata - 16: 3 0 IO-APIC-fasteoi ohci1394 - 17: 0 0 IO-APIC-fasteoi uhci_hcd:usb4, [EMAIL PROTECTED]:0000:00:02.0 - 18: 63997 0 IO-APIC-fasteoi uhci_hcd:usb3, sdhci:slot0, tifm_7xx1, yenta, ipw3945 - 19: 0 0 IO-APIC-fasteoi uhci_hcd:usb1, ehci_hcd:usb5 - 20: 0 0 IO-APIC-fasteoi uhci_hcd:usb2 - 21: 800 0 IO-APIC-fasteoi eth0 - 22: 68788 0 IO-APIC-fasteoi HDA Intel - NMI: 0 0 - LOC: 400960 400958 - ERR: 0 - MIS: 0 + CSC
-- intel hda audio much too soft https://launchpad.net/bugs/88965 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
