Public bug reported:
Binary package hint: wammu
Distro: Ubuntu 9.10
Source package: wammu
Version: 0.30.1-2
Hi all,
I tried to use wammu with 3G GSM DONGLE "ONDA MDC502HS". It is a multi-device
attached on USB port. When attached, it is seen as a "CD-ROM". After having
(virtually) "ejected" it, the dongle switches to a 3G GSM device and these
devices appear under /dev:
ls -al /dev/ttyUSB*
crw-rw---- 1 root dialout 188, 0 2009-12-28 14:30 /dev/ttyUSB0
crw-rw---- 1 root dialout 188, 1 2009-12-28 14:39 /dev/ttyUSB1
crw-rw---- 1 root dialout 188, 2 2009-12-28 14:30 /dev/ttyUSB2
The output of "lsusb" is:
lsusb | grep ONDA
Bus 003 Device 004: ID 19d2:0002 ONDA Communication S.p.A. ET502HS/MT505UP ZTE
MF632
Wammu is configured to use the device "/dev/ttyUSB1". The first time I
try to use the connect command in Wammu, it waits a long while and then
it reports a time out (the relative log is attached).
If, without closing Wammu and without unplugging the device, I try to
connect again, the connection happens successfully.
I hope this piece of information can be useful, Bye.
** Affects: wammu (Ubuntu)
Importance: Undecided
Status: New
--
Wammu timeout during connection
https://bugs.launchpad.net/bugs/501025
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
