Same here on 9.10 with Acecad clone. Mouse pointer moves but no click
events from tip nor buttons... Out of the box it appears to use the
evdev driver.
:~$ xinput --list
...
"Acecad USB Tablet" id=7 [XExtensionPointer]
Type is TOUCHPAD
Num_buttons is 5
Num_axes is 3
Mode is Absolute
Motion_buffer is 256
Axis 0 :
Min_value is 0
Max_value is 5000
Resolution is 10000
Axis 1 :
Min_value is 0
Max_value is 3750
Resolution is 10000
Axis 2 :
Min_value is 0
Max_value is 512
Resolution is 10000
...
:~$ xinput list-props "Acecad USB Tablet"
Device 'stylus':
Device Enabled (134): 1
Evdev Reopen Attempts (268): 10
Evdev Axis Inversion (269): 0, 0
Evdev Axis Calibration (270):
Evdev Axes Swap (271): 0
Evdev Middle Button Emulation (272): 2
Evdev Middle Button Timeout (273): 50
Evdev Wheel Emulation (274): 0
Evdev Wheel Emulation Axes (275): 0, 0, 4, 5
Evdev Wheel Emulation Inertia (276): 10
Evdev Wheel Emulation Timeout (277): 200
Evdev Wheel Emulation Button (278): 4
Evdev Drag Lock Buttons (279): 0
Synaptics Off (299): 0
:~$ xinput get-button-map "Acecad USB Tablet"
1 2 3 4 5
:~$ xinput query-state "Acecad USB Tablet"
2 classes :
ButtonClass
button[1]=up
button[2]=up
button[3]=up
button[4]=up
button[5]=up
ValuatorClass Mode=Absolute Proximity=In
valuator[0]=2359
valuator[1]=2690
valuator[2]=0
:~$ lshal -u usb_device_460_4_noserial_if0_logicaldev_input
udi =
'/org/freedesktop/Hal/devices/usb_device_460_4_noserial_if0_logicaldev_input'
info.capabilities = {'input', 'input.tablet'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_460_4_noserial_if0'
(string)
info.product = 'Acecad USB Tablet' (string)
info.subsystem = 'input' (string)
info.udi =
'/org/freedesktop/Hal/devices/usb_device_460_4_noserial_if0_logicaldev_input'
(string)
input.device = '/dev/input/event5' (string)
input.originating_device =
'/org/freedesktop/Hal/devices/usb_device_460_4_noserial_if0' (string)
input.product = 'Acecad USB Tablet' (string)
input.x11_driver = 'evdev' (string)
linux.device_file = '/dev/input/event5' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path =
'/sys/devices/pci0000:00/0000:00:1c.0/usb2/2-1/2-1:1.0/input/input5/event5'
(string)
#
# /var/log/Xorg.0.log
#
...
(II) config/hal: Adding input device stylus
(**) Acecad USB Tablet: always reports core events
(**) Acecad USB Tablet: Device: "/dev/input/event5"
(II) Acecad USB Tablet: Found 3 mouse buttons
(II) Acecad USB Tablet: Found x and y absolute axes
(II) Acecad USB Tablet: Found absolute touchpad
(II) Acecad USB Tablet: Configuring as touchpad
(**) Acecad USB Tablet: YAxisMapping: buttons 4 and 5
(**) Acecad USB Tablet: EmulateWheelButton: 4, EmulateWheelInertia: 10,
EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Acecad USB Tablet" (type: TOUCHPAD)
(**) Acecad USB Tablet: (accel) keeping acceleration scheme 1
(**) Acecad USB Tablet: (accel) filter chain progression: 2.00
(**) Acecad USB Tablet: (accel) filter stage 0: 20.00 ms
(**) Acecad USB Tablet: (accel) set acceleration profile 0
(II) Acecad USB Tablet: initialized for absolute axes.
...
And after using the two buttons on the stylus:
...
(WW) Acecad USB Tablet: unable to handle keycode 331
(WW) Acecad USB Tablet: unable to handle keycode 332
...
#
# /proc/bus/input/devices
#
...
I: Bus=0003 Vendor=0460 Product=0004 Version=0001
N: Name="Acecad USB Tablet"
P: Phys=usb-0000:00:1c.0-1/input0
S: Sysfs=/devices/pci0000:00/0000:00:1c.0/usb2/2-1/2-1:1.0/input/input5
U: Uniq=
H: Handlers=mouse1 event5
B: EV=b
B: KEY=1c01 70000 0 0 0 0
B: ABS=1000003
...
--
Tablet doesn't work after upgrade to 8.10
https://bugs.launchpad.net/bugs/292331
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
