My Shuttle box also suffers from this problem after upgrading to 9.10
(9.04 was fine). Ethernet chip periodically locks up - about once a day
with the following log:
Nov 3 19:24:39 cube kernel: [ 9782.746442] EXT3-fs warning: maximal mount
count reached, running e2fsck is recommended
Nov 3 19:24:39 cube kernel: [ 9782.747134] EXT3 FS on sdb1, internal journal
Nov 3 19:24:39 cube kernel: [ 9782.747140] EXT3-fs: mounted filesystem with
writeback data mode.
Nov 3 19:34:05 cube kernel: [10349.127358] usb 1-2: USB disconnect, address 6
Nov 3 20:46:36 cube kernel: [14699.989023] ------------[ cut here ]------------
Nov 3 20:46:36 cube kernel: [14699.989045] WARNING: at
/build/buildd/linux-2.6.31/net/sched/sch_generic.c:246
dev_watchdog+0x1f6/0x210()
Nov 3 20:46:36 cube kernel: [14699.989052] Hardware name: SK22V10
Nov 3 20:46:36 cube kernel: [14699.989056] NETDEV WATCHDOG: eth0 (via-rhine):
transmit queue 0 timed out
Nov 3 20:46:36 cube kernel: [14699.989061] Modules linked in: isofs udf
crc_itu_t nls_iso8859_1 nls_cp437 vfat fat usb_storage binfmt_misc ppdev
snd_usb_audio snd_usb_lib snd_hwdep gspca_stv06xx gspca_zc3xx gspca_main
iptable_filter videodev v4l1_compat ip_tables x_tables snd_via82xx gameport
snd_ac97_codec ac97_bus snd_pcm_oss snd_mixer_oss snd_pcm snd_page_alloc
snd_mpu401_uart lp snd_seq_dummy psmouse keyspan_remote k8temp i2c_viapro
shpchp nvidia(P) serio_raw parport snd_seq_oss snd_seq_midi snd_rawmidi
snd_seq_midi_event snd_seq snd_timer snd_seq_device snd soundcore ohci1394
via_rhine mii ieee1394 sata_via amd64_agp agpgart
Nov 3 20:46:36 cube kernel: [14699.989153] Pid: 0, comm: swapper Tainted: P
2.6.31-14-generic #48-Ubuntu
Nov 3 20:46:36 cube kernel: [14699.989159] Call Trace:
Nov 3 20:46:36 cube kernel: [14699.989173] [<c014518d>]
warn_slowpath_common+0x6d/0xa0
Nov 3 20:46:36 cube kernel: [14699.989182] [<c04b07c6>] ?
dev_watchdog+0x1f6/0x210
Nov 3 20:46:36 cube kernel: [14699.989190] [<c04b07c6>] ?
dev_watchdog+0x1f6/0x210
Nov 3 20:46:36 cube kernel: [14699.989198] [<c0145206>]
warn_slowpath_fmt+0x26/0x30
Nov 3 20:46:36 cube kernel: [14699.989206] [<c04b07c6>]
dev_watchdog+0x1f6/0x210
Nov 3 20:46:36 cube kernel: [14699.989215] [<c0120065>] ?
__assign_irq_vector+0xc5/0x1c0
Nov 3 20:46:36 cube kernel: [14699.989223] [<c05707da>] ?
_spin_lock_irqsave+0x2a/0x40
Nov 3 20:46:36 cube kernel: [14699.989230] [<c01508d0>] ?
add_timer_on+0x70/0xc0
Nov 3 20:46:36 cube kernel: [14699.989237] [<c01501b7>]
run_timer_softirq+0x117/0x200
Nov 3 20:46:36 cube kernel: [14699.989248] [<c016a125>] ?
tick_dev_program_event+0x45/0xe0
Nov 3 20:46:36 cube kernel: [14699.989256] [<c04b05d0>] ?
dev_watchdog+0x0/0x210
Nov 3 20:46:36 cube kernel: [14699.989264] [<c014b3b0>]
__do_softirq+0x90/0x1a0
Nov 3 20:46:36 cube kernel: [14699.989274] [<c015ff63>] ?
hrtimer_interrupt+0x183/0x210
Nov 3 20:46:36 cube kernel: [14699.989282] [<c014b4fd>] do_softirq+0x3d/0x40
Nov 3 20:46:36 cube kernel: [14699.989288] [<c014b63d>] irq_exit+0x5d/0x70
Nov 3 20:46:36 cube kernel: [14699.989295] [<c011dcf7>]
smp_apic_timer_interrupt+0x57/0x90
Nov 3 20:46:36 cube kernel: [14699.989303] [<c0103d71>]
apic_timer_interrupt+0x31/0x40
Nov 3 20:46:36 cube kernel: [14699.989311] [<c0126fc5>] ?
native_safe_halt+0x5/0x10
Nov 3 20:46:36 cube kernel: [14699.989318] [<c010a486>] default_idle+0x46/0xd0
Nov 3 20:46:36 cube kernel: [14699.989324] [<c010a55d>] c1e_idle+0x4d/0x100
Nov 3 20:46:36 cube kernel: [14699.989331] [<c010202c>] cpu_idle+0x8c/0xd0
Nov 3 20:46:36 cube kernel: [14699.989340] [<c056c096>]
start_secondary+0xc6/0xc8
Nov 3 20:46:36 cube kernel: [14699.989346] ---[ end trace 08de259b328a8e53 ]---
Nov 3 20:46:36 cube kernel: [14699.989495] eth0: Transmit timed out, status
1003, PHY status 786d, resetting...
Nov 3 20:46:36 cube kernel: [14699.990191] eth0: link up, 100Mbps,
full-duplex, lpa 0xCDE1
Nov 3 20:46:56 cube kernel: [14719.989163] eth0: Transmit timed out, status
0003, PHY status 786d, resetting...
Nov 3 20:46:56 cube kernel: [14719.989804] eth0: link up, 100Mbps,
full-duplex, lpa 0xCDE1
Nov 3 20:47:16 cube kernel: [14739.989167] eth0: Transmit timed out, status
0003, PHY status 786d, resetting...
Nov 3 20:47:16 cube kernel: [14739.989867] eth0: link up, 100Mbps,
full-duplex, lpa 0xCDE1
Nov 3 20:47:28 cube kernel: [14751.989172] eth0: Transmit timed out, status
0003, PHY status 786d, resetting...
Nov 3 20:47:28 cube kernel: [14751.989884] eth0: link up, 100Mbps,
full-duplex, lpa 0xCDE1
Nov 3 20:47:40 cube kernel: [14763.988164] eth0: Transmit timed out, status
0003, PHY status 786d, resetting...
Nov 3 20:47:40 cube kernel: [14763.988855] eth0: link up, 100Mbps,
full-duplex, lpa 0xCDE1
Nov 3 20:47:54 cube kernel: [14777.989171] eth0: Transmit timed out, status
0003, PHY status 786d, resetting...
Nov 3 20:47:54 cube kernel: [14777.989859] eth0: link up, 100Mbps,
full-duplex, lpa 0xCDE1
Nov 3 20:48:06 cube kernel: [14789.989171] eth0: Transmit timed out, status
0003, PHY status 786d, resetting...
Nov 3 20:48:06 cube kernel: [14789.989859] eth0: link up, 100Mbps,
full-duplex, lpa 0xCDE1
Nov 3 20:48:18 cube kernel: [14801.988180] eth0: Transmit timed out, status
0003, PHY status 786d, resetting...
Nov 3 20:48:18 cube kernel: [14801.988861] eth0: link up, 100Mbps,
full-duplex, lpa 0xCDE1
Nov 3 20:48:28 cube kernel: [14811.989065] eth0: Transmit timed out, status
0003, PHY status 786d, resetting...
Nov 3 20:48:28 cube kernel: [14811.989763] eth0: link up, 100Mbps,
full-duplex, lpa 0xCDE1
.
. etc etc. ad infinitum.
.
Rebooting the OS is the only workaround so far. Thanks for your
attention.
--
NETDEV WATCHDOG: eth0 (via-rhine): transmit queue 0 timed out
https://bugs.launchpad.net/bugs/454747
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
