Yes, here is info:

[EMAIL PROTECTED]:~$ ifconfig -a
eth0      Link encap:Ethernet  HWaddr 00:18:DE:4E:AB:06  
          inet addr:192.168.2.4  Bcast:192.168.2.255  Mask:255.255.255.0
          inet6 addr: fe80::218:deff:fe4e:ab06/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:672 errors:0 dropped:338 overruns:0 frame:0
          TX packets:669 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:479258 (468.0 KiB)  TX bytes:150489 (146.9 KiB)
          Interrupt:16 Memory:d6000000-d6000fff 

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:1550 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1550 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:120995 (118.1 KiB)  TX bytes:120995 (118.1 KiB)

[EMAIL PROTECTED]:~$ 
[EMAIL PROTECTED]:~$ iwconfig
lo        no wireless extensions.

eth0      IEEE 802.11g  ESSID:"SOMETHING"  
          Mode:Managed  Frequency:2.412 GHz  Access Point: 00:01:E3:D2:4C:95   
          Bit Rate:54 Mb/s   Tx-Power:15 dBm   
          Retry limit:15   RTS thr:off   Fragment thr:off
          Power Management:off
          Link Quality=72/100  Signal level=-62 dBm  Noise level=-63 dBm
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:338   Missed beacon:0

[EMAIL PROTECTED]:~$ dmesg
[    0.000000] Linux version 2.6.20-6-generic ([EMAIL PROTECTED]) (gcc version 
4.1.2 20070106 (prerelease) (Ubuntu 4.1.1-21ubuntu7)) #2 SMP Wed Jan 31 
20:53:39 UTC 2007 (Ubuntu 2.6.20-6.11-generic)
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] sanitize start
[    0.000000] sanitize end
[    0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009f800 
end: 000000000009f800 type: 1
[    0.000000] copy_e820_map() type is E820_RAM
[    0.000000] copy_e820_map() start: 000000000009f800 size: 0000000000000800 
end: 00000000000a0000 type: 2
[    0.000000] copy_e820_map() start: 00000000000dc000 size: 0000000000024000 
end: 0000000000100000 type: 2
[    0.000000] copy_e820_map() start: 0000000000100000 size: 000000001f580000 
end: 000000001f680000 type: 1
[    0.000000] copy_e820_map() type is E820_RAM
[    0.000000] copy_e820_map() start: 000000001f680000 size: 0000000000080000 
end: 000000001f700000 type: 4
[    0.000000] copy_e820_map() start: 000000001f700000 size: 0000000000900000 
end: 0000000020000000 type: 2
[    0.000000] copy_e820_map() start: 00000000e0000000 size: 0000000010000000 
end: 00000000f0000000 type: 2
[    0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000000010000 
end: 00000000fec10000 type: 2
[    0.000000] copy_e820_map() start: 00000000fed00000 size: 0000000000000400 
end: 00000000fed00400 type: 2
[    0.000000] copy_e820_map() start: 00000000fed14000 size: 0000000000006000 
end: 00000000fed1a000 type: 2
[    0.000000] copy_e820_map() start: 00000000fed1c000 size: 0000000000074000 
end: 00000000fed90000 type: 2
[    0.000000] copy_e820_map() start: 00000000fee00000 size: 0000000000001000 
end: 00000000fee01000 type: 2
[    0.000000] copy_e820_map() start: 00000000ff000000 size: 0000000001000000 
end: 0000000100000000 type: 2
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000001f680000 (usable)
[    0.000000]  BIOS-e820: 000000001f680000 - 000000001f700000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000001f700000 - 0000000020000000 (reserved)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[    0.000000]  BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[    0.000000] 0MB HIGHMEM available.
[    0.000000] 502MB LOWMEM available.
[    0.000000] found SMP MP-table at 000f7670
[    0.000000] Entering add_active_range(0, 0, 128640) 0 entries of 256 used
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   Normal       4096 ->   128640
[    0.000000]   HighMem    128640 ->   128640
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0:        0 ->   128640
[    0.000000] On node 0 totalpages: 128640
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 4064 pages, LIFO batch:0
[    0.000000]   Normal zone: 973 pages used for memmap
[    0.000000]   Normal zone: 123571 pages, LIFO batch:31
[    0.000000]   HighMem zone: 0 pages used for memmap
[    0.000000] DMI present.
[    0.000000] ACPI: RSDP (v000 TOSCPL                                ) @ 
0x000f75e0
[    0.000000] ACPI: RSDT (v001 TOSCPL Capell00 0x06040000  LTP 0x00000000) @ 
0x1f681b68
[    0.000000] ACPI: FADT (v001 TOSCPL CALISTGA 0x06040000 LOHR 0x0000005a) @ 
0x1f688dfc
[    0.000000] ACPI: MADT (v001 INTEL  CALISTGA 0x06040000 LOHR 0x0000005a) @ 
0x1f688e70
[    0.000000] ACPI: HPET (v001 INTEL  CALISTGA 0x06040000 LOHR 0x0000005a) @ 
0x1f688ed8
[    0.000000] ACPI: MCFG (v001 INTEL  CALISTGA 0x06040000 LOHR 0x0000005a) @ 
0x1f688f10
[    0.000000] ACPI: BOOT (v001 PTLTD  $SBFTBL$ 0x06040000  LTP 0x00000001) @ 
0x1f688fd8
[    0.000000] ACPI: MADT (v001 PTLTD    APIC   0x06040000  LTP 0x00000000) @ 
0x1f688f7e
[    0.000000] ACPI: SSDT (v001 SataRe  SataPri 0x00001000 INTL 0x20050624) @ 
0x1f682b3c
[    0.000000] ACPI: SSDT (v001 SataRe  SataSec 0x00001000 INTL 0x20050624) @ 
0x1f6824aa
[    0.000000] ACPI: SSDT (v001  PmRef  Cpu0Ist 0x00003000 INTL 0x20050624) @ 
0x1f68228a
[    0.000000] ACPI: SSDT (v001  PmRef  Cpu0Cst 0x00003001 INTL 0x20050624) @ 
0x1f6820ae
[    0.000000] ACPI: SSDT (v001  PmRef    CpuPm 0x00003000 INTL 0x20050624) @ 
0x1f681bb8
[    0.000000] ACPI: DSDT (v001 TOSCPL CALISTGA 0x06040000 INTL 0x20050624) @ 
0x00000000
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: 2 duplicate APIC table ignored.
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] Processor #0 6:14 APIC version 20
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] Allocating PCI resources starting at 30000000 (gap: 
20000000:c0000000)
[    0.000000] Detected 1862.063 MHz processor.
[   21.721992] Built 1 zonelists.  Total pages: 127635
[   21.721996] Kernel command line: 
root=UUID=8ce65f0e-3c7f-43ac-b263-978e016a60ea ro quiet splash
[   21.722143] mapped APIC to ffffd000 (fee00000)
[   21.722145] mapped IOAPIC to ffffc000 (fec00000)
[   21.722148] Enabling fast FPU save and restore... done.
[   21.722151] Enabling unmasked SIMD FPU exception support... done.
[   21.722159] Initializing CPU#0
[   21.722234] PID hash table entries: 2048 (order: 11, 8192 bytes)
[   21.723956] Console: colour VGA+ 80x25
[   21.724131] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[   21.724316] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[   21.734982] Memory: 499300k/514560k available (1975k kernel code, 14784k 
reserved, 878k data, 324k init, 0k highmem)
[   21.734991] virtual kernel memory layout:
[   21.734992]     fixmap  : 0xfff4e000 - 0xfffff000   ( 708 kB)
[   21.734993]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[   21.734994]     vmalloc : 0xe0000000 - 0xff7fe000   ( 503 MB)
[   21.734996]     lowmem  : 0xc0000000 - 0xdf680000   ( 502 MB)
[   21.734997]       .init : 0xc03cf000 - 0xc0420000   ( 324 kB)
[   21.734998]       .data : 0xc02edd14 - 0xc03c96d4   ( 878 kB)
[   21.734999]       .text : 0xc0100000 - 0xc02edd14   (1975 kB)
[   21.735002] Checking if this processor honours the WP bit even in supervisor 
mode... Ok.
[   21.735161] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[   21.735166] hpet0: 3 64-bit timers, 14318180 Hz
[   21.736170] Using HPET for base-timer
[   21.815028] Calibrating delay using timer specific routine.. 3728.20 
BogoMIPS (lpj=7456405)
[   21.815066] Security Framework v1.0.0 initialized
[   21.815074] SELinux:  Disabled at boot.
[   21.815089] Mount-cache hash table entries: 512
[   21.815207] CPU: After generic identify, caps: afe9fbff 00100000 00000000 
00000000 0000c189 00000000 00000000
[   21.815214] monitor/mwait feature present.
[   21.815216] using mwait in idle threads.
[   21.815220] CPU: L1 I cache: 32K, L1 D cache: 32K
[   21.815222] CPU: L2 cache: 2048K
[   21.815225] CPU: After all inits, caps: afe9fbff 00100000 00000000 00002940 
0000c189 00000000 00000000
[   21.815242] Checking 'hlt' instruction... OK.
[   21.831094] SMP alternatives: switching to UP code
[   21.831265] Freeing SMP alternatives: 11k freed
[   21.831341] ACPI: Core revision 20060707
[   21.854828] CPU0: Intel Genuine Intel(R) CPU           T1350  @ 1.86GHz 
stepping 08
[   21.854852] Total of 1 processors activated (3728.20 BogoMIPS).
[   21.855056] ENABLING IO-APIC IRQs
[   21.855254] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[   22.002733] Brought up 1 CPUs
[   22.002929] Booting paravirtualized kernel on bare hardware
[   22.002975] NET: Registered protocol family 16
[   22.003043] EISA bus registered
[   22.003047] ACPI: bus type pci registered
[   22.003055] PCI: Using MMCONFIG
[   22.003773] Setting up standard PCI resources
[   22.011911] ACPI: Interpreter enabled
[   22.011913] ACPI: Using IOAPIC for interrupt routing
[   22.012319] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   22.012324] PCI: Probing PCI hardware (bus 00)
[   22.012963] Boot video device is 0000:00:02.0
[   22.013446] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[   22.013450] PCI quirk: region 1180-11bf claimed by ICH6 GPIO
[   22.014382] PCI: Transparent bridge - 0000:00:1e.0
[   22.014445] PCI: Bus #07 (-#0a) is hidden behind transparent bridge #06 
(-#07) (try 'pci=assign-busses')
[   22.014448] Please report the result to linux-kernel to fix this permanently
[   22.014489] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   22.020954] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[   22.021184] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[   22.022103] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[   22.022659] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[   22.022889] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) 
*10
[   22.023112] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) 
*11
[   22.023333] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[   22.023552] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) 
*11
[   22.023771] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) 
*0, disabled.
[   22.023990] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) 
*11
[   22.024210] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[   22.075076] Linux Plug and Play Support v0.97 (c) Adam Belay
[   22.075088] pnp: PnP ACPI init
[   22.102650] pnp: PnP ACPI: found 10 devices
[   22.102653] PnPBIOS: Disabled by ACPI PNP
[   22.102684] PCI: Using ACPI for IRQ routing
[   22.102687] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, 
post a report
[   22.102971] pnp: 00:01: ioport range 0xfe00-0xfe7f has been reserved
[   22.102974] pnp: 00:01: ioport range 0xfe80-0xfeff has been reserved
[   22.102977] pnp: 00:01: ioport range 0xff00-0xff7f has been reserved
[   22.103180] PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
[   22.103185] PCI: Bridge: 0000:00:1c.0
[   22.103188]   IO window: 2000-2fff
[   22.103194]   MEM window: d4000000-d5ffffff
[   22.103198]   PREFETCH window: d0000000-d1ffffff
[   22.103203] PCI: Bridge: 0000:00:1c.1
[   22.103206]   IO window: 3000-3fff
[   22.103211]   MEM window: d6000000-d7ffffff
[   22.103215]   PREFETCH window: d2000000-d3ffffff
[   22.103226] PCI: Bus 7, cardbus bridge: 0000:06:04.0
[   22.103228]   IO window: 00004400-000044ff
[   22.103233]   IO window: 00004800-000048ff
[   22.103238]   PREFETCH window: 30000000-33ffffff
[   22.103242]   MEM window: 34000000-37ffffff
[   22.103247] PCI: Bridge: 0000:00:1e.0
[   22.103250]   IO window: 4000-4fff
[   22.103255]   MEM window: d8000000-d80fffff
[   22.103259]   PREFETCH window: 30000000-33ffffff
[   22.103282] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> 
IRQ 16
[   22.103288] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[   22.103306] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> 
IRQ 17
[   22.103311] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[   22.103323] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[   22.103337] ACPI: PCI Interrupt 0000:06:04.0[A] -> GSI 16 (level, low) -> 
IRQ 17
[   22.103358] NET: Registered protocol family 2
[   22.138508] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[   22.138569] TCP established hash table entries: 16384 (order: 5, 131072 
bytes)
[   22.138657] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[   22.138701] TCP: Hash tables configured (established 16384 bind 8192)
[   22.138704] TCP reno registered
[   22.150542] checking if image is initramfs... it is
[   22.730204] Freeing initrd memory: 6697k freed
[   22.730607] Simple Boot Flag at 0x36 set to 0x1
[   22.730885] audit: initializing netlink socket (disabled)
[   22.730898] audit(1170510450.064:1): initialized
[   22.730998] VFS: Disk quotas dquot_6.5.1
[   22.731019] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   22.731061] io scheduler noop registered
[   22.731063] io scheduler anticipatory registered
[   22.731065] io scheduler deadline registered
[   22.731072] io scheduler cfq registered (default)
[   22.731456] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[   22.731503] assign_interrupt_mode Found MSI capability
[   22.731547] Allocate Port Service[0000:00:1c.0:pcie00]
[   22.731576] Allocate Port Service[0000:00:1c.0:pcie02]
[   22.731602] Allocate Port Service[0000:00:1c.0:pcie03]
[   22.731700] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[   22.731747] assign_interrupt_mode Found MSI capability
[   22.731780] Allocate Port Service[0000:00:1c.1:pcie00]
[   22.731807] Allocate Port Service[0000:00:1c.1:pcie02]
[   22.731833] Allocate Port Service[0000:00:1c.1:pcie03]
[   22.732143] isapnp: Scanning for PnP cards...
[   23.085813] isapnp: No Plug & Play device found
[   23.106391] Real Time Clock Driver v1.12ac
[   23.106441] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing 
enabled
[   23.107009] mice: PS/2 mouse device common for all mice
[   23.107476] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 
blocksize
[   23.107638] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[   23.107642] ide: Assuming 33MHz system bus speed for PIO modes; override 
with idebus=xx
[   23.107922] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 
irq 1,12
[   23.108147] i8042.c: Detected active multiplexing controller, rev 1.1.
[   23.108222] serio: i8042 KBD port at 0x60,0x64 irq 1
[   23.108226] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[   23.108228] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[   23.108230] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[   23.108232] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[   23.108326] EISA: Probing bus 0 at eisa.0
[   23.108335] Cannot allocate resource for EISA slot 1
[   23.108337] Cannot allocate resource for EISA slot 2
[   23.108339] Cannot allocate resource for EISA slot 3
[   23.108341] Cannot allocate resource for EISA slot 4
[   23.108358] EISA: Detected 0 cards.
[   23.138477] TCP cubic registered
[   23.138485] NET: Registered protocol family 1
[   23.138490] NET: Registered protocol family 8
[   23.138492] NET: Registered protocol family 20
[   23.138522] Using IPI No-Shortcut mode
[   23.138585] ACPI: (supports S0 S3 S4 S5)
[   23.138800] Freeing unused kernel memory: 324k freed
[   23.140498] input: AT Translated Set 2 keyboard as /class/input/input0
[   23.140747] Time: tsc clocksource has been installed.
[   24.323423] Capability LSM initialized
[   24.349018] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[   24.349028] ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor 
Device is not present [20060707]
[   24.640630] usbcore: registered new interface driver usbfs
[   24.640649] usbcore: registered new interface driver hub
[   24.640666] usbcore: registered new device driver usb
[   24.641353] USB Universal Host Controller Interface driver v3.0
[   24.641398] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> 
IRQ 18
[   24.641407] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[   24.641411] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[   24.641548] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus 
number 1
[   24.641579] uhci_hcd 0000:00:1d.0: irq 18, io base 0x00001820
[   24.641659] usb usb1: configuration #1 chosen from 1 choice
[   24.641678] hub 1-0:1.0: USB hub found
[   24.641682] hub 1-0:1.0: 2 ports detected
[   24.697574] ieee1394: Initialized config rom entry `ip1394'
[   24.742130] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> 
IRQ 19
[   24.742142] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[   24.742146] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[   24.742164] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus 
number 2
[   24.742196] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
[   24.742277] usb usb2: configuration #1 chosen from 1 choice
[   24.742299] hub 2-0:1.0: USB hub found
[   24.742304] hub 2-0:1.0: 2 ports detected
[   24.845957] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> 
IRQ 20
[   24.845968] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[   24.845972] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[   24.845994] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus 
number 3
[   24.846028] uhci_hcd 0000:00:1d.2: irq 20, io base 0x00001860
[   24.846102] usb usb3: configuration #1 chosen from 1 choice
[   24.846122] hub 3-0:1.0: USB hub found
[   24.846126] hub 3-0:1.0: 2 ports detected
[    3.080000] Time: hpet clocksource has been installed.
[    3.104000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> 
IRQ 17
[    3.104000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[    3.104000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    3.104000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus 
number 4
[    3.104000] uhci_hcd 0000:00:1d.3: irq 17, io base 0x00001880
[    3.104000] usb usb4: configuration #1 chosen from 1 choice
[    3.104000] hub 4-0:1.0: USB hub found
[    3.104000] hub 4-0:1.0: 2 ports detected
[    3.208000] ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 20 (level, low) -> 
IRQ 21
[    3.260000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21]  
MMIO=[d8001000-d80017ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
[    3.264000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> 
IRQ 18
[    3.264000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[    3.264000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    3.264000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus 
number 5
[    3.264000] ehci_hcd 0000:00:1d.7: debug port 1
[    3.264000] PCI: cache line size of 32 is not supported by device 
0000:00:1d.7
[    3.264000] ehci_hcd 0000:00:1d.7: irq 18, io mem 0xd8444000
[    3.268000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 
2004
[    3.268000] usb usb5: configuration #1 chosen from 1 choice
[    3.268000] hub 5-0:1.0: USB hub found
[    3.268000] hub 5-0:1.0: 8 ports detected
[    3.376000] SCSI subsystem initialized
[    3.380000] libata version 2.00 loaded.
[    3.380000] ata_piix 0000:00:1f.2: version 2.00ac7
[    3.380000] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[    3.536000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> 
IRQ 19
[    3.536000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[    3.536000] ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0x18B0 irq 14
[    3.536000] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18B8 irq 15
[    3.536000] scsi0 : ata_piix
[    3.700000] ata1.00: ATA-7, max UDMA/100, 117210240 sectors: LBA48 NCQ 
(depth 0/32)
[    3.700000] ata1.00: ata1: dev 0 multi count 16
[    3.708000] ata1.00: configured for UDMA/100
[    3.708000] scsi1 : ata_piix
[    4.028000] ata2.00: ATAPI, max UDMA/33
[    4.192000] ata2.00: configured for UDMA/33
[    4.192000] scsi 0:0:0:0: Direct-Access     ATA      TOSHIBA MK6034GS AH10 
PQ: 0 ANSI: 5
[    4.192000] scsi 1:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ-841S  1.70 
PQ: 0 ANSI: 5
[    4.208000] SCSI device sda: 117210240 512-byte hdwr sectors (60012 MB)
[    4.208000] sda: Write Protect is off
[    4.208000] sda: Mode Sense: 00 3a 00 00
[    4.208000] SCSI device sda: write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[    4.208000] SCSI device sda: 117210240 512-byte hdwr sectors (60012 MB)
[    4.208000] sda: Write Protect is off
[    4.208000] sda: Mode Sense: 00 3a 00 00
[    4.208000] SCSI device sda: write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[    4.208000]  sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
[    4.300000] sd 0:0:0:0: Attached scsi disk sda
[    4.304000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    4.304000] scsi 1:0:0:0: Attached scsi generic sg1 type 5
[    4.312000] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda 
tray
[    4.312000] Uniform CD-ROM driver Revision: 3.20
[    4.312000] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    4.536000] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00023f6a994001b8]
[    4.548000] Attempting manual resume
[    4.588000] kjournald starting.  Commit interval 5 seconds
[    4.588000] EXT3-fs: mounted filesystem with ordered data mode.
[   13.316000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   13.316000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   13.600000] intel_rng: FWH not detected
[   14.084000] Linux agpgart interface v0.101 (c) Dave Jones
[   14.088000] agpgart: Detected an Intel 945GM Chipset.
[   14.088000] agpgart: Detected 7932K stolen memory.
[   14.108000] agpgart: AGP aperture is 256M @ 0xc0000000
[   14.128000] iTCO_vendor_support: vendor-support=0
[   14.140000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006)
[   14.140000] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
[   14.140000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   14.204000] Yenta: CardBus bridge found at 0000:06:04.0 [1179:ff01]
[   14.204000] Yenta: Using CSCINT to route CSC interrupts to PCI
[   14.204000] Yenta: Routing CardBus interrupts to PCI
[   14.204000] Yenta TI: socket 0000:06:04.0, mfunc 0x89501212, devctl 0x44
[   14.224000] sdhci: Secure Digital Host Controller Interface driver, 0.12
[   14.224000] sdhci: Copyright(c) Pierre Ossman
[   14.412000] input: PC Speaker as /class/input/input1
[   14.436000] Yenta: ISA IRQ mask 0x0cf8, PCI irq 17
[   14.436000] Socket status: 30000006
[   14.436000] Yenta: Raising subordinate bus# of parent bus (#06) from #07 to 
#0a
[   14.436000] pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff
[   14.436000] cs: IO port probe 0x4000-0x4fff: clean.
[   14.436000] pcmcia: parent PCI bridge Memory window: 0xd8000000 - 0xd80fffff
[   14.436000] pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x33ffffff
[   14.436000] sdhci: SDHCI controller found at 0000:06:04.2 [1524:0550] (rev 1)
[   14.436000] ACPI: PCI Interrupt 0000:06:04.2[B] -> GSI 17 (level, low) -> 
IRQ 16
[   14.436000] sdhci:slot0: Controller reports > 25 MHz base clock, but no high 
speed support.
[   14.436000] mmc0: SDHCI at 0xd8001c00 irq 16 DMA
[   14.444000] input: PS/2 Mouse as /class/input/input2
[   14.464000] input: AlpsPS/2 ALPS GlidePoint as /class/input/input3
[   14.880000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> 
IRQ 22
[   14.880000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[   14.932000] ieee80211_crypt: registered algorithm 'NULL'
[   14.944000] ieee80211: 802.11 data/management/control stack, git-1.1.13
[   14.944000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <[EMAIL 
PROTECTED]>
[   15.012000] ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver 
for Linux, 1.1.3mp
[   15.012000] ipw3945: Copyright(c) 2003-2006 Intel Corporation
[   15.072000] hda_codec: Unknown model for ALC861, trying auto-probe from 
BIOS...
[   15.156000] cs: IO port probe 0x100-0x3af: clean.
[   15.156000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[   15.156000] cs: IO port probe 0x820-0x8ff: clean.
[   15.156000] cs: IO port probe 0xc00-0xcf7: clean.
[   15.160000] cs: IO port probe 0xa00-0xaff: clean.
[   15.836000] si3054: cannot initialize. EXT MID = 0000
[   15.852000] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> 
IRQ 16
[   15.852000] PCI: Setting latency timer of device 0000:04:00.0 to 64
[   15.852000] ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection
[   16.596000] fuse init (API version 7.8)
[   16.644000] lp: driver loaded but no devices found
[   16.688000] Adding 771080k swap on 
/dev/disk/by-uuid/beb9fa37-eb1b-4fa6-bfbf-165d9655f917.  Priority:-1 extents:1 
across:771080k
[   16.828000] EXT3 FS on sda6, internal journal
[   17.776000] ipw3945: Detected geography ABG (13 802.11bg channels, 23 
802.11a channels)
[   18.272000] NET: Registered protocol family 17
[   57.812000] NET: Registered protocol family 10
[   57.812000] lo: Disabled Privacy Extensions
[   57.812000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   75.052000] ibm_acpi: ec object not found
[   75.136000] No dock devices found.
[   75.212000] ACPI: Battery Slot [BAT1] (battery present)
[   75.220000] ACPI: AC Adapter [ACAD] (on-line)
[   75.228000] toshiba_acpi: Unknown parameter `hotkeys_over_acpi'
[   75.296000] input: Power Button (FF) as /class/input/input4
[   75.312000] ACPI: Power Button (FF) [PWRF]
[   75.360000] input: Lid Switch as /class/input/input5
[   75.376000] ACPI: Lid Switch [LID0]
[   75.420000] input: Power Button (CM) as /class/input/input6
[   75.436000] ACPI: Power Button (CM) [PWRB]
[   75.448000] Using specific hotkey driver
[   75.460000] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[   75.460000] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   77.440000] [drm] Initialized drm 1.1.0 20060810
[   77.464000] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> 
IRQ 17
[   77.464000] [drm] Initialized i915 1.6.0 20060119 on minor 0
[   79.516000] apm: BIOS not found.
[   85.708000] Bluetooth: Core ver 2.11
[   85.712000] NET: Registered protocol family 31
[   85.712000] Bluetooth: HCI device and connection manager initialized
[   85.712000] Bluetooth: HCI socket layer initialized
[   85.816000] Bluetooth: L2CAP ver 2.8
[   85.816000] Bluetooth: L2CAP socket layer initialized
[   86.072000] Bluetooth: RFCOMM socket layer initialized
[   86.072000] Bluetooth: RFCOMM TTY layer initialized
[   86.072000] Bluetooth: RFCOMM ver 1.8
[  139.604000] usb 2-2: new low speed USB device using uhci_hcd and address 2
[  139.860000] usb 2-2: configuration #1 chosen from 1 choice
[  140.408000] usbcore: registered new interface driver hiddev
[  140.448000] input: HID 1241:1166 as /class/input/input7
[  140.448000] input: USB HID v1.10 Mouse [HID 1241:1166] on usb-0000:00:1d.1-2
[  140.448000] usbcore: registered new interface driver usbhid
[  140.448000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[  218.900000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  281.904000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  299.512000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  301.448000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  315.656000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  343.440000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  358.204000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  366.400000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  432.848000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  485.476000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  493.952000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  520.184000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  869.296000] ieee80211_crypt: registered algorithm 'WEP'
[  871.556000] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  882.496000] eth0: no IPv6 routers present
[ 1141.236000] ACPI: PCI interrupt for device 0000:04:00.0 disabled
[ 1143.684000] Disabling non-boot CPUs ...
[ 1143.684000] Stopping tasks ... done.
[ 1143.916000] Suspending console(s)
[ 1144.556000]  usbdev5.1_ep81: PM: suspend 0->2, parent 5-0:1.0 already 2
[ 1144.556000] hub 5-0:1.0: PM: suspend 2->2, parent usb5 already 2
[ 1144.556000]  usbdev5.1_ep00: PM: suspend 0->2, parent usb5 already 2
[ 1144.556000]  usbdev4.1_ep81: PM: suspend 0->2, parent 4-0:1.0 already 2
[ 1144.556000] hub 4-0:1.0: PM: suspend 2->2, parent usb4 already 2
[ 1144.556000]  usbdev4.1_ep00: PM: suspend 0->2, parent usb4 already 2
[ 1144.556000]  usbdev3.1_ep81: PM: suspend 0->2, parent 3-0:1.0 already 2
[ 1144.556000] hub 3-0:1.0: PM: suspend 2->2, parent usb3 already 2
[ 1144.556000]  usbdev3.1_ep00: PM: suspend 0->2, parent usb3 already 2
[ 1144.556000]  usbdev1.1_ep81: PM: suspend 0->2, parent 1-0:1.0 already 2
[ 1144.556000] hub 1-0:1.0: PM: suspend 2->2, parent usb1 already 2
[ 1144.556000]  usbdev1.1_ep00: PM: suspend 0->2, parent usb1 already 2
[ 1145.056000] ACPI: PCI interrupt for device 0000:06:04.2 disabled
[ 1145.072000] ohci1394 does not fully support suspend and resume yet
[ 1145.092000] ACPI: PCI interrupt for device 0000:00:1f.2 disabled
[ 1145.108000] ACPI: PCI interrupt for device 0000:00:1d.7 disabled
[ 1145.124000] ACPI: PCI interrupt for device 0000:00:1d.3 disabled
[ 1145.124000] ACPI: PCI interrupt for device 0000:00:1d.2 disabled
[ 1145.124000] ACPI: PCI interrupt for device 0000:00:1d.1 disabled
[ 1145.124000] ACPI: PCI interrupt for device 0000:00:1d.0 disabled
[ 1145.132000] ACPI: PCI interrupt for device 0000:00:1b.0 disabled
[ 1145.148000] Back to C!
[ 1172.188000] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> 
IRQ 17
[ 1172.204000] PM: Writing back config space on device 0000:00:1b.0 at offset b 
(was 0, writing ff011179)
[ 1172.204000] PM: Writing back config space on device 0000:00:1b.0 at offset 1 
(was 100006, writing 100002)
[ 1172.204000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> 
IRQ 22
[ 1172.204000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 1172.400000] si3054: cannot initialize. EXT MID = 0000
[ 1172.408000] PM: Writing back config space on device 0000:00:1c.0 at offset f 
(was 40100, writing 4010a)
[ 1172.408000] PM: Writing back config space on device 0000:00:1c.0 at offset 9 
(was 10001, writing d1f1d001)
[ 1172.408000] PM: Writing back config space on device 0000:00:1c.0 at offset 8 
(was 0, writing d5f0d400)
[ 1172.408000] PM: Writing back config space on device 0000:00:1c.0 at offset 7 
(was 20000000, writing 2020)
[ 1172.408000] PM: Writing back config space on device 0000:00:1c.0 at offset 6 
(was 0, writing 20200)
[ 1172.408000] PM: Writing back config space on device 0000:00:1c.0 at offset 3 
(was 810000, writing 810010)
[ 1172.408000] PM: Writing back config space on device 0000:00:1c.0 at offset 1 
(was 100000, writing 100407)
[ 1172.408000] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 1172.408000] PM: Writing back config space on device 0000:00:1c.1 at offset f 
(was 40200, writing 4020a)
[ 1172.408000] PM: Writing back config space on device 0000:00:1c.1 at offset 9 
(was 10001, writing d3f1d201)
[ 1172.408000] PM: Writing back config space on device 0000:00:1c.1 at offset 8 
(was 0, writing d7f0d600)
[ 1172.408000] PM: Writing back config space on device 0000:00:1c.1 at offset 7 
(was 20000000, writing 3030)
[ 1172.408000] PM: Writing back config space on device 0000:00:1c.1 at offset 3 
(was 810000, writing 810010)
[ 1172.408000] PM: Writing back config space on device 0000:00:1c.1 at offset 1 
(was 100000, writing 100407)
[ 1172.408000] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 1172.408000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> 
IRQ 18
[ 1172.408000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 1172.408000] usb usb1: root hub lost power or was reset
[ 1172.408000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> 
IRQ 19
[ 1172.408000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 1172.408000] usb usb2: root hub lost power or was reset
[ 1172.408000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> 
IRQ 20
[ 1172.408000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 1172.408000] usb usb3: root hub lost power or was reset
[ 1172.408000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> 
IRQ 17
[ 1172.408000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 1172.408000] usb usb4: root hub lost power or was reset
[ 1172.424000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> 
IRQ 18
[ 1172.424000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 1172.424000] PM: Writing back config space on device 0000:00:1e.0 at offset 9 
(was 1fff1, writing 33f13001)
[ 1172.424000] PM: Writing back config space on device 0000:00:1e.0 at offset 6 
(was 20070600, writing 200a0600)
[ 1172.424000] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 1172.440000] PM: Writing back config space on device 0000:00:1f.2 at offset 1 
(was 2b00005, writing 2b80005)
[ 1172.440000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> 
IRQ 19
[ 1172.440000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 1172.440000] PM: Writing back config space on device 0000:04:00.0 at offset f 
(was 100, writing 10a)
[ 1172.440000] PM: Writing back config space on device 0000:04:00.0 at offset 4 
(was 0, writing d6000000)
[ 1172.440000] PM: Writing back config space on device 0000:04:00.0 at offset 3 
(was 0, writing 10)
[ 1172.440000] PM: Writing back config space on device 0000:04:00.0 at offset 1 
(was 100000, writing 100002)
[ 1172.508000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21]  
MMIO=[d8001000-d80017ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
[ 1172.512000] PM: Writing back config space on device 0000:06:04.0 at offset f 
(was 744010a, writing 5c0010a)
[ 1172.512000] PM: Writing back config space on device 0000:06:04.0 at offset e 
(was 0, writing 48fc)
[ 1172.512000] PM: Writing back config space on device 0000:06:04.0 at offset d 
(was 0, writing 4800)
[ 1172.512000] PM: Writing back config space on device 0000:06:04.0 at offset c 
(was 0, writing 44fc)
[ 1172.512000] PM: Writing back config space on device 0000:06:04.0 at offset b 
(was 0, writing 4400)
[ 1172.512000] PM: Writing back config space on device 0000:06:04.0 at offset a 
(was 0, writing 37fff000)
[ 1172.512000] PM: Writing back config space on device 0000:06:04.0 at offset 9 
(was 0, writing 34000000)
[ 1172.512000] PM: Writing back config space on device 0000:06:04.0 at offset 8 
(was 0, writing 33fff000)
[ 1172.512000] PM: Writing back config space on device 0000:06:04.0 at offset 7 
(was 0, writing 30000000)
[ 1172.512000] PM: Writing back config space on device 0000:06:04.0 at offset 6 
(was 20070706, writing b00a0706)
[ 1172.512000] PM: Writing back config space on device 0000:06:04.0 at offset 3 
(was 824008, writing 82a820)
[ 1172.512000] PM: Writing back config space on device 0000:06:04.1 at offset f 
(was 40102ff, writing 401020a)
[ 1172.512000] PM: Writing back config space on device 0000:06:04.1 at offset 4 
(was 0, writing d8001800)
[ 1172.512000] PM: Writing back config space on device 0000:06:04.1 at offset 3 
(was 800000, writing 802010)
[ 1172.512000] PM: Writing back config space on device 0000:06:04.1 at offset 1 
(was 2100000, writing 2100006)
[ 1172.528000] PM: Writing back config space on device 0000:06:04.2 at offset f 
(was 482002ff, writing 4820020a)
[ 1172.528000] PM: Writing back config space on device 0000:06:04.2 at offset 4 
(was 0, writing d8001c00)
[ 1172.528000] PM: Writing back config space on device 0000:06:04.2 at offset 3 
(was 800000, writing 802010)
[ 1172.528000] PM: Writing back config space on device 0000:06:04.2 at offset 1 
(was 2100000, writing 2100006)
[ 1172.528000] ACPI: PCI Interrupt 0000:06:04.2[B] -> GSI 17 (level, low) -> 
IRQ 16
[ 1172.532000] PM: Writing back config space on device 0000:06:04.3 at offset f 
(was 40102ff, writing 401020a)
[ 1172.532000] PM: Writing back config space on device 0000:06:04.3 at offset 4 
(was 0, writing d8002000)
[ 1172.532000] PM: Writing back config space on device 0000:06:04.3 at offset 3 
(was 800000, writing 802010)
[ 1172.532000] PM: Writing back config space on device 0000:06:04.3 at offset 1 
(was 2100000, writing 2100006)
[ 1172.532000] PM: Writing back config space on device 0000:06:04.4 at offset 4 
(was 0, writing d8001900)
[ 1172.532000] pnp: Device 00:08 does not support activation.
[ 1172.532000] pnp: Device 00:09 does not support activation.
[ 1172.816000]  usbdev5.1_ep00: PM: resume from 0, parent usb5 still 2
[ 1172.816000]  usbdev5.1_ep81: PM: resume from 0, parent 5-0:1.0 still 2
[ 1172.816000]  usbdev2.2_ep00: PM: resume from 0, parent 2-2 still 2
[ 1172.816000] usbhid 2-2:1.0: PM: resume from 2, parent 2-2 still 2
[ 1172.816000]  usbdev2.2_ep81: PM: resume from 0, parent 2-2:1.0 still 2
[ 1172.816000] Restarting tasks ... <6>usb 2-2: USB disconnect, address 2
[ 1172.872000] done.
[ 1172.872000] Enabling non-boot CPUs ...
[ 1172.872000] APIC error on CPU0: 00(40)
[ 1173.484000] usb 2-2: new low speed USB device using uhci_hcd and address 3
[ 1173.500000] input: PS/2 Mouse as /class/input/input8
[ 1173.516000] input: AlpsPS/2 ALPS GlidePoint as /class/input/input9
[ 1173.684000] usb 2-2: configuration #1 chosen from 1 choice
[ 1173.732000] ata1.00: configured for UDMA/100
[ 1173.732000] input: HID 1241:1166 as /class/input/input10
[ 1173.732000] input: USB HID v1.10 Mouse [HID 1241:1166] on usb-0000:00:1d.1-2
[ 1173.756000] SCSI device sda: 117210240 512-byte hdwr sectors (60012 MB)
[ 1173.772000] sda: Write Protect is off
[ 1173.772000] sda: Mode Sense: 00 3a 00 00
[ 1173.780000] SCSI device sda: write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[ 1173.932000] ata2.00: configured for UDMA/33
[ 1174.692000] ieee80211: 802.11 data/management/control stack, git-1.1.13
[ 1174.692000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <[EMAIL 
PROTECTED]>
[ 1174.756000] ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver 
for Linux, 1.1.3mp
[ 1174.756000] ipw3945: Copyright(c) 2003-2006 Intel Corporation
[ 1174.756000] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> 
IRQ 16
[ 1174.756000] PCI: Setting latency timer of device 0000:04:00.0 to 64
[ 1174.756000] ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection
[ 1175.516000] input: Power Button (FF) as /class/input/input11
[ 1175.516000] ACPI: Power Button (FF) [PWRF]
[ 1175.516000] input: Lid Switch as /class/input/input12
[ 1175.516000] ACPI: Lid Switch [LID0]
[ 1175.516000] input: Power Button (CM) as /class/input/input13
[ 1175.516000] ACPI: Power Button (CM) [PWRB]
[ 1175.920000] ACPI: AC Adapter [ACAD] (on-line)
[ 1176.008000] ACPI: Battery Slot [BAT1] (battery present)
[ 1176.540000] ipw3945: Detected geography ABG (13 802.11bg channels, 23 
802.11a channels)
[ 1176.816000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1243.632000] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 1254.612000] eth0: no IPv6 routers present
[ 1281.688000] eth0: no IPv6 routers present

-- 
Internet via DHCP lost after suspend on Toshiba laptop
https://launchpad.net/bugs/79104

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Reply via email to