Dominique, the error still there, i have opened a new bug,
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=529880
i try that you say, stopped still scanning but still not connecting, i
get hci0 timeout on both cases,
if i disconnect and reconnect with hcid stopped this show me nothing...
maxim...@maximiliano:~$ sudo /etc/init.d/bluetooth start
Starting bluetooth: hcid.
maxim...@maximiliano:~$ sudo l2ping 00:1A:1B:96:93:22
^C0 sent, 0 received, 0% loss
maxim...@maximiliano:~$ sudo hcitool cc 00:1A:1B:96:93:22
maxim...@maximiliano:~$ sudo /etc/init.d/bluetooth stop
Stopping bluetooth: hcid.
maxim...@maximiliano:~$ sudo hcitool cc 00:1A:1B:96:93:22
maxim...@maximiliano:~$ sudo hcitool scan
Scanning ...
00:1A:1B:96:93:22 Archer's L6
maxim...@maximiliano:~$ sudo hcitool inq
Inquiring ...
00:1A:1B:96:93:22 clock offset: 0x18a2 class: 0x522204
maxim...@maximiliano:~$ sudo /etc/init.d/bluetooth stop
Stopping bluetooth: hcid.
maxim...@maximiliano:~$ sudo hciconfig -a
hci0: Type: USB
BD Address: 00:11:67:CB:5D:87 ACL MTU: 1021:4 SCO MTU: 48:10
UP RUNNING PSCAN ISCAN
RX bytes:2899 acl:0 sco:0 events:80 errors:0
TX bytes:1085 acl:0 sco:0 commands:64 errors:0
Features: 0xff 0xfe 0xff 0x7e 0x98 0x19 0x00 0x80
Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
Link policy: RSWITCH HOLD SNIFF PARK
Link mode: SLAVE ACCEPT
Name: 'Maximiliano-0'
Class: 0x080100
Service Classes: Capturing
Device Class: Computer, Uncategorized
HCI Ver: 2.0 (0x3) HCI Rev: 0x302 LMP Ver: 2.0 (0x3) LMP Subver: 0x302
Manufacturer: Integrated System Solution Corp. (57)
maxim...@maximiliano:~$ sudo hciconfig -a
hci0: Type: USB
BD Address: 00:00:00:00:00:00 ACL MTU: 0:0 SCO MTU: 0:0
DOWN
RX bytes:0 acl:0 sco:0 events:0 errors:0
TX bytes:0 acl:0 sco:0 commands:0 errors:0
But if i umount /proc/bus/usb
i can use some times for a while....
maxim...@maximiliano:~$ sudo umount /proc/bus/usb
maxim...@maximiliano:~$ sudo /etc/init.d/bluetooth start
Starting bluetooth: hcid.
maxim...@maximiliano:~$ sudo hcitool cc 00:1A:1B:96:93:22
maxim...@maximiliano:~$ sudo l2ping 00:1A:1B:96:93:22
^C0 sent, 0 received, 0% loss
maxim...@maximiliano:~$ sudo /etc/init.d/bluetooth start
Starting bluetooth: hcid.
maxim...@maximiliano:~$ sudo /etc/init.d/bluetooth stop
Stopping bluetooth: hcid.
maxim...@maximiliano:~$ sudo l2ping 00:1A:1B:96:93:22
^C0 sent, 0 received, 0% loss
maxim...@maximiliano:~$ sudo hciconfig -a
hci0: Type: USB
BD Address: 00:11:67:CB:5D:87 ACL MTU: 1021:4 SCO MTU: 48:10
UP RUNNING PSCAN ISCAN
RX bytes:421 acl:0 sco:0 events:19 errors:0
TX bytes:336 acl:0 sco:0 commands:19 errors:0
Features: 0xff 0xfe 0xff 0x7e 0x98 0x19 0x00 0x80
Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
Link policy: RSWITCH HOLD SNIFF PARK
Link mode: SLAVE ACCEPT
Can't read local name on hci0: Connection timed out (110)
maxim...@maximiliano:~$ sudo umount /proc/bus/usb
umount: /proc/bus/usb: no montado
And dmesg...
[69525.496543] btusb_intr_complete: hci0 urb f4a7aec0 failed to resubmit (19)
[69525.496842] btusb_send_frame: hci0 urb f4a7aec0 submission failed
[69528.376049] usb 2-2: new full speed USB device using ohci_hcd and address 7
[69528.597532] usb 2-2: New USB device found, idVendor=1131, idProduct=1004
[69528.597540] usb 2-2: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[69528.597545] usb 2-2: Product: ISSCEDRBTA
[69528.597549] usb 2-2: Manufacturer: ISSC
[69528.597677] usb 2-2: configuration #1 chosen from 1 choice
[69621.111274] hci_cmd_task: hci0 command tx timeout
[69647.528825] hci_cmd_task: hci0 command tx timeout
[69656.143488] hci_cmd_task: hci0 command tx timeout
[69731.054159] usb 2-2: USB disconnect, address 7
[69731.054820] btusb_intr_complete: hci0 urb f4a5a840 failed to resubmit (19)
[69731.055105] btusb_send_frame: hci0 urb f4a5a840 submission failed
[69732.192040] usb 2-2: new full speed USB device using ohci_hcd and address 8
[69732.416750] usb 2-2: New USB device found, idVendor=1131, idProduct=1004
[69732.416758] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[69732.416763] usb 2-2: Product: ISSCEDRBTA
[69732.416767] usb 2-2: Manufacturer: ISSC
[69732.416898] usb 2-2: configuration #1 chosen from 1 choice
[69788.244848] usb 2-2: USB disconnect, address 8
[69788.245281] btusb_intr_complete: hci0 urb de03ec40 failed to resubmit (19)
[69788.245762] hci_cmd_task: hci0 command tx timeout
[69788.245775] btusb_send_frame: hci0 urb de03ec40 submission failed
[69788.248037] btusb_send_frame: hci0 urb de03ec40 submission failed
[69789.936036] usb 2-2: new full speed USB device using ohci_hcd and address 9
[69790.160176] usb 2-2: New USB device found, idVendor=1131, idProduct=1004
[69790.160183] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[69790.160189] usb 2-2: Product: ISSCEDRBTA
[69790.160193] usb 2-2: Manufacturer: ISSC
[69790.160321] usb 2-2: configuration #1 chosen from 1 choice
** Bug watch added: Debian Bug tracker #529880
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=529880
--
[D-Link DBT-122] Bluetooth doesn't work (hci_cmd_task: hci0 command tx timeout)
https://bugs.launchpad.net/bugs/377225
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
