Public bug reported:
With a stock Ubuntu 6.10 bootCD, or SMPenabled 6.06 kernel, my system freezes
at startup
with no errors or any sign of faults. Except of course from the fact that i can
in no way
interact with the computer. It doesnt react to the mouse nor the keyboard at
all.
info here ->
uname -a
: Linux xeon 2.6.15-27-386 #1 PREEMPT Fri Dec 8 17:51:56 UTC 2006 i686 GNU/Linux
dmesg
: [17179569.184000] Linux version 2.6.15-27-386 ([EMAIL PROTECTED]) (gcc
version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 PREEMPT Fri Dec 8 17:51:56 UTC 2006
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[17179569.184000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[17179569.184000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[17179569.184000] BIOS-e820: 0000000000100000 - 000000005fee0000 (usable)
[17179569.184000] BIOS-e820: 000000005fee0000 - 000000005fee3000 (ACPI NVS)
[17179569.184000] BIOS-e820: 000000005fee3000 - 000000005fef0000 (ACPI data)
[17179569.184000] BIOS-e820: 000000005fef0000 - 000000005ff00000 (reserved)
[17179569.184000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[17179569.184000] 638MB HIGHMEM available.
[17179569.184000] 896MB LOWMEM available.
[17179569.184000] found SMP MP-table at 000f5bd0
[17179569.184000] On node 0 totalpages: 392928
[17179569.184000] DMA zone: 4096 pages, LIFO batch:0
[17179569.184000] DMA32 zone: 0 pages, LIFO batch:0
[17179569.184000] Normal zone: 225280 pages, LIFO batch:31
[17179569.184000] HighMem zone: 163552 pages, LIFO batch:31
[17179569.184000] DMI 2.3 present.
[17179569.184000] ACPI: RSDP (v000 IntelR ) @
0x000f7c60
[17179569.184000] ACPI: RSDT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000)
@ 0x5fee3040
[17179569.184000] ACPI: FADT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000)
@ 0x5fee30c0
[17179569.184000] ACPI: MADT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000)
@ 0x5fee71c0
[17179569.184000] ACPI: DSDT (v001 INTELR AWRDACPI 0x00001000 MSFT 0x0100000e)
@ 0x00000000
[17179569.184000] ACPI: PM-Timer IO Port: 0x408
[17179569.184000] ACPI: Local APIC address 0xfee00000
[17179569.184000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[17179569.184000] Processor #0 15:3 APIC version 20
[17179569.184000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x06] enabled)
[17179569.184000] Processor #6 15:3 APIC version 20
[17179569.184000] WARNING: NR_CPUS limit of 1 reached. Processor ignored.
[17179569.184000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[17179569.184000] Processor #1 15:3 APIC version 20
[17179569.184000] WARNING: NR_CPUS limit of 1 reached. Processor ignored.
[17179569.184000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x07] enabled)
[17179569.184000] Processor #7 15:3 APIC version 20
[17179569.184000] WARNING: NR_CPUS limit of 1 reached. Processor ignored.
[17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[17179569.184000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[17179569.184000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[17179569.184000] ACPI: IOAPIC (id[0x05] address[0xfec10000] gsi_base[24])
[17179569.184000] IOAPIC[1]: apic_id 5, version 32, address 0xfec10000, GSI
24-47
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[17179569.184000] ACPI: IRQ0 used by override.
[17179569.184000] ACPI: IRQ2 used by override.
[17179569.184000] ACPI: IRQ9 used by override.
[17179569.184000] Enabling APIC mode: Flat. Using 2 I/O APICs
[17179569.184000] Using ACPI (MADT) for SMP configuration information
[17179569.184000] Allocating PCI resources starting at 60000000 (gap:
5ff00000:9ed00000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=/dev/sdd2 ro quiet splash
[17179569.184000] mapped APIC to ffffd000 (fee00000)
[17179569.184000] mapped IOAPIC to ffffc000 (fec00000)
[17179569.184000] mapped IOAPIC to ffffb000 (fec10000)
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 4096 (order: 12, 65536 bytes)
[17179569.184000] Detected 2800.573 MHz processor.
[17179569.184000] Using pmtmr for high-res timesource
[17179569.184000] Console: colour VGA+ 80x25
[17179570.208000] Dentry cache hash table entries: 131072 (order: 7, 524288
bytes)
[17179570.208000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[17179570.268000] Memory: 1547356k/1571712k available (1976k kernel code,
23028k reserved, 606k data, 288k init, 654208k highmem)
[17179570.268000] Checking if this processor honours the WP bit even in
supervisor mode... Ok.
[17179570.348000] Calibrating delay using timer specific routine.. 5605.68
BogoMIPS (lpj=11211378)
[17179570.348000] Security Framework v1.0.0 initialized
[17179570.348000] SELinux: Disabled at boot.
[17179570.348000] Mount-cache hash table entries: 512
[17179570.348000] CPU: After generic identify, caps: bfebfbff 20000000 00000000
00000000 0000441d 00000000 00000000
[17179570.348000] CPU: After vendor identify, caps: bfebfbff 20000000 00000000
00000000 0000441d 00000000 00000000
[17179570.348000] monitor/mwait feature present.
[17179570.348000] using mwait in idle threads.
[17179570.348000] CPU: Trace cache: 12K uops, L1 D cache: 16K
[17179570.348000] CPU: L2 cache: 1024K
[17179570.348000] CPU: After all inits, caps: bfebfbff 20000000 00000000
00000080 0000441d 00000000 00000000
[17179570.348000] mtrr: v2.0 (20020519)
[17179570.348000] CPU: Intel(R) Xeon(TM) CPU 2.80GHz stepping 04
[17179570.348000] Enabling fast FPU save and restore... done.
[17179570.348000] Enabling unmasked SIMD FPU exception support... done.
[17179570.348000] Checking 'hlt' instruction... OK.
[17179570.364000] checking if image is initramfs... it is
[17179570.908000] Freeing initrd memory: 6614k freed
[17179570.916000] ACPI: Looking for DSDT ... not found!
[17179571.120000] ENABLING IO-APIC IRQs
[17179571.120000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[17179571.264000] NET: Registered protocol family 16
[17179571.264000] EISA bus registered
[17179571.264000] ACPI: bus type pci registered
[17179571.276000] PCI: PCI BIOS revision 2.10 entry at 0xf1d30, last bus=4
[17179571.276000] PCI: Using configuration type 1
[17179571.276000] ACPI: Subsystem revision 20051216
[17179571.284000] ACPI: Interpreter enabled
[17179571.284000] ACPI: Using IOAPIC for interrupt routing
[17179571.284000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[17179571.284000] PCI: Probing PCI hardware (bus 00)
[17179571.288000] PCI quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO
[17179571.288000] PCI quirk: region 0480-04bf claimed by ICH4 GPIO
[17179571.288000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2
[17179571.288000] Boot video device is 0000:01:00.0
[17179571.288000] PCI: Transparent bridge - 0000:00:1e.0
[17179571.288000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[17179571.296000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[17179571.296000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HRB_._PRT]
[17179571.304000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 *9 10 11 12 14
15)
[17179571.304000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 9 10 11 12 14
15)
[17179571.304000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12 14
15)
[17179571.304000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14
15)
[17179571.304000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *9 10 11 12 14
15)
[17179571.304000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11 12 14
15)
[17179571.304000] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 12 14
15) *0, disabled.
[17179571.304000] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 7 9 10 11 12 14
15)
[17179571.304000] Linux Plug and Play Support v0.97 (c) Adam Belay
[17179571.304000] pnp: PnP ACPI init
[17179571.308000] pnp: PnP ACPI: found 16 devices
[17179571.308000] PnPBIOS: Disabled by ACPI PNP
[17179571.308000] PCI: Using ACPI for IRQ routing
[17179571.308000] PCI: If a device doesn't work, try "pci=routeirq". If it
helps, post a report
[17179571.344000] pnp: 00:0c: ioport range 0x400-0x4bf could not be reserved
[17179571.344000] PCI: Bridge: 0000:00:01.0
[17179571.344000] IO window: disabled.
[17179571.344000] MEM window: f8000000-faffffff
[17179571.344000] PREFETCH window: e0000000-efffffff
[17179571.344000] PCI: Bridge: 0000:00:03.0
[17179571.344000] IO window: a000-afff
[17179571.344000] MEM window: fb000000-fc0fffff
[17179571.344000] PREFETCH window: 60000000-600fffff
[17179571.344000] PCI: Bridge: 0000:00:1c.0
[17179571.344000] IO window: disabled.
[17179571.344000] MEM window: disabled.
[17179571.344000] PREFETCH window: disabled.
[17179571.344000] PCI: Bridge: 0000:00:1e.0
[17179571.344000] IO window: b000-bfff
[17179571.344000] MEM window: fc100000-fc1fffff
[17179571.344000] PREFETCH window: disabled.
[17179571.344000] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[17179571.344000] audit: initializing netlink socket (disabled)
[17179571.344000] audit(1168172138.344:1): initialized
[17179571.344000] highmem bounce pool size: 64 pages
[17179571.344000] VFS: Disk quotas dquot_6.5.1
[17179571.344000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[17179571.344000] Initializing Cryptographic API
[17179571.344000] io scheduler noop registered
[17179571.344000] io scheduler anticipatory registered
[17179571.344000] io scheduler deadline registered
[17179571.344000] io scheduler cfq registered
[17179571.344000] isapnp: Scanning for PnP cards...
[17179571.696000] isapnp: No Plug & Play device found
[17179571.716000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64
irq 1,12
[17179571.728000] serio: i8042 AUX port at 0x60,0x64 irq 12
[17179571.728000] serio: i8042 KBD port at 0x60,0x64 irq 1
[17179571.728000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ
sharing enabled
[17179571.728000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179571.728000] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[17179571.728000] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179571.728000] 00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[17179571.732000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024
blocksize
[17179571.732000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[17179571.732000] ide: Assuming 33MHz system bus speed for PIO modes; override
with idebus=xx
[17179571.732000] mice: PS/2 mouse device common for all mice
[17179571.740000] EISA: Probing bus 0 at eisa.0
[17179571.740000] EISA: Detected 0 cards.
[17179571.740000] NET: Registered protocol family 2
[17179571.932000] input: AT Translated Set 2 keyboard as /class/input/input0
[17179571.944000] IP route cache hash table entries: 65536 (order: 6, 262144
bytes)
[17179571.944000] TCP established hash table entries: 262144 (order: 8, 1048576
bytes)
[17179571.944000] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[17179571.944000] TCP: Hash tables configured (established 262144 bind 65536)
[17179571.944000] TCP reno registered
[17179571.944000] TCP bic registered
[17179571.944000] NET: Registered protocol family 1
[17179571.944000] NET: Registered protocol family 8
[17179571.944000] NET: Registered protocol family 20
[17179571.944000] Using IPI Shortcut mode
[17179571.944000] ACPI wakeup devices:
[17179571.944000] PCI0 CSAD HUB0 HRB UAR1 UAR2 PS2M PS2K USB0 USB1 USBE MODM
[17179571.944000] ACPI: (supports S0 S1 S3 S4 S5)
[17179571.944000] Freeing unused kernel memory: 288k freed
[17179571.988000] vga16fb: initializing
[17179571.992000] vga16fb: mapped to 0xc00a0000
[17179572.384000] Console: switching to colour frame buffer device 80x25
[17179572.384000] fb0: VGA16 VGA frame buffer device
[17179573.452000] Capability LSM initialized
[17179574.472000] SCSI subsystem initialized
[17179574.472000] ACPI: bus type scsi registered
[17179574.472000] libata version 1.20 loaded.
[17179574.472000] sata_promise 0000:04:04.0: version 1.03
[17179574.472000] ACPI: PCI Interrupt 0000:04:04.0[A] -> GSI 23 (level, low) ->
IRQ 169
[17179574.492000] ata1: SATA max UDMA/133 cmd 0xF8860200 ctl 0xF8860238 bmdma
0x0 irq 169
[17179574.492000] ata2: SATA max UDMA/133 cmd 0xF8860280 ctl 0xF88602B8 bmdma
0x0 irq 169
[17179574.492000] ata3: SATA max UDMA/133 cmd 0xF8860300 ctl 0xF8860338 bmdma
0x0 irq 169
[17179574.492000] ata4: SATA max UDMA/133 cmd 0xF8860380 ctl 0xF88603B8 bmdma
0x0 irq 169
[17179574.860000] ata1: dev 0 cfg 00:427a 49:2f00 82:746b 83:7f61 84:4023
85:7469 86:3c41 87:4023 88:407f 93:0000
[17179574.860000] ata1: dev 0 ATA-7, max UDMA/133, 625142448 sectors: LBA48
[17179574.860000] sata_get_dev_handle: SATA dev addr=0x40000, handle=0x00000000
[17179574.860000] ata1: dev 0 configured for UDMA/133
[17179574.860000] sata_get_dev_handle: SATA dev addr=0x40000, handle=0x00000000
[17179574.860000] scsi0 : sata_promise
[17179575.228000] ata2: dev 0 cfg 00:427a 49:2f00 82:746b 83:7f61 84:4023
85:7469 86:3c41 87:4023 88:407f 93:0000
[17179575.228000] ata2: dev 0 ATA-7, max UDMA/133, 625142448 sectors: LBA48
[17179575.228000] sata_get_dev_handle: SATA dev addr=0x40000, handle=0x00000000
[17179575.228000] ata2: dev 0 configured for UDMA/133
[17179575.228000] sata_get_dev_handle: SATA dev addr=0x40000, handle=0x00000000
[17179575.228000] scsi1 : sata_promise
[17179575.432000] ata3: no device found (phy stat 00000000)
[17179575.432000] scsi2 : sata_promise
[17179575.800000] ata4: dev 0 cfg 00:427a 49:2f00 82:746b 83:7f61 84:4023
85:7469 86:3c41 87:4023 88:407f 93:0000
[17179575.800000] ata4: dev 0 ATA-7, max UDMA/133, 625142448 sectors: LBA48
[17179575.800000] sata_get_dev_handle: SATA dev addr=0x40000, handle=0x00000000
[17179575.800000] ata4: dev 0 configured for UDMA/133
[17179575.800000] sata_get_dev_handle: SATA dev addr=0x40000, handle=0x00000000
[17179575.800000] scsi3 : sata_promise
[17179575.800000] Vendor: ATA Model: WDC WD3200KS-00P Rev: 21.0
[17179575.800000] Type: Direct-Access ANSI SCSI
revision: 05
[17179575.800000] Vendor: ATA Model: WDC WD3200KS-00P Rev: 21.0
[17179575.800000] Type: Direct-Access ANSI SCSI
revision: 05
[17179575.800000] Vendor: ATA Model: WDC WD3200KS-00P Rev: 21.0
[17179575.800000] Type: Direct-Access ANSI SCSI
revision: 05
[17179575.808000] Driver 'sd' needs updating - please use bus_type methods
[17179575.812000] SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB)
[17179575.816000] SCSI device sda: drive cache: write back
[17179575.816000] SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB)
[17179575.816000] SCSI device sda: drive cache: write back
[17179575.816000] sda: sda1
[17179575.836000] sd 0:0:0:0: Attached scsi disk sda
[17179575.836000] SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB)
[17179575.840000] SCSI device sdb: drive cache: write back
[17179575.840000] SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB)
[17179575.840000] SCSI device sdb: drive cache: write back
[17179575.840000] sdb: sdb1
[17179575.864000] sd 1:0:0:0: Attached scsi disk sdb
[17179575.864000] SCSI device sdc: 625142448 512-byte hdwr sectors (320073 MB)
[17179575.868000] SCSI device sdc: drive cache: write back
[17179575.872000] SCSI device sdc: 625142448 512-byte hdwr sectors (320073 MB)
[17179575.872000] SCSI device sdc: drive cache: write back
[17179575.872000] sdc: sdc1
[17179575.892000] sd 3:0:0:0: Attached scsi disk sdc
[17179576.076000] ata_piix 0000:00:1f.2: version 1.05
[17179576.076000] ata_piix 0000:00:1f.2: combined mode detected (p=1, s=0)
[17179576.076000] ata_pci_init_one: pci_dev class+intf: 0x1018a
[17179576.076000] ata_pci_init_one: NO_LEGACY == 0
[17179576.076000] ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) ->
IRQ 177
[17179576.076000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[17179576.076000] ata5: PATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0xF000 irq
14
[17179576.240000] ata5: dev 0 cfg 00:0040 49:2f00 82:7c6b 83:7b09 84:4003
85:7c69 86:3a01 87:4003 88:407f 93:0000
[17179576.240000] ata5: dev 0 ATA-7, max UDMA/133, 240121728 sectors: LBA
[17179576.240000] ata_acpi_push_id: skipping for PATA mode
[17179576.248000] ata5: dev 1 cfg 00:427a 49:2f00 82:346b 83:7f61 84:4003
85:3469 86:3c41 87:4003 88:407f 93:0000
[17179576.248000] ata5: dev 1 ATA-6, max UDMA/133, 488397168 sectors: LBA48
[17179576.248000] ata_acpi_push_id: skipping for PATA mode
[17179576.248000] ata5: dev 0 configured for UDMA/133
[17179576.248000] ata5: dev 1 configured for UDMA/133
[17179576.248000] pata_get_dev_handle: ENTER: dev->bus_id='0000:00:1f.2'
[17179576.248000] pata_get_dev_handle: dev_handle: 0xdffe7300, parent_handle:
0xdf96fcc0
[17179576.248000] pata_get_dev_handle: for dev=0x1f.2, addr=0x1f0002,
parent=0xdff73a00, *handle=0xdffe7300
[17179576.248000] do_drive_get_GTF: drive w/ adr=0: v: 0xdffe7e20
[17179576.248000] pata_get_dev_handle: ENTER: dev->bus_id='0000:00:1f.2'
[17179576.248000] pata_get_dev_handle: dev_handle: 0xdffe7300, parent_handle:
0xdf96fcc0
[17179576.248000] pata_get_dev_handle: for dev=0x1f.2, addr=0x1f0002,
parent=0xdff73a00, *handle=0xdffe7300
[17179576.248000] do_drive_get_GTF: drive w/ adr=1: v: 0xdffe7da0
[17179576.252000] scsi4 : ata_piix
[17179576.252000] Vendor: ATA Model: Maxtor 6Y120M0 Rev: YAR5
[17179576.252000] Type: Direct-Access ANSI SCSI
revision: 05
[17179576.252000] SCSI device sdd: 240121728 512-byte hdwr sectors (122942 MB)
[17179576.252000] SCSI device sdd: drive cache: write back
[17179576.252000] SCSI device sdd: 240121728 512-byte hdwr sectors (122942 MB)
[17179576.252000] SCSI device sdd: drive cache: write back
[17179576.252000] sdd: sdd1 sdd2 sdd3 sdd4
[17179576.296000] sdd4: <bsd: sdd5 sdd6 sdd7 sdd8 sdd9 sdd10 sdd11 >
[17179576.300000] sd 4:0:0:0: Attached scsi disk sdd
[17179576.300000] Vendor: ATA Model: WDC WD2500JD-00H Rev: 08.0
[17179576.300000] Type: Direct-Access ANSI SCSI
revision: 05
[17179576.300000] SCSI device sde: 488397168 512-byte hdwr sectors (250059 MB)
[17179576.300000] SCSI device sde: drive cache: write back
[17179576.300000] SCSI device sde: 488397168 512-byte hdwr sectors (250059 MB)
[17179576.300000] SCSI device sde: drive cache: write back
[17179576.300000] sde: sde1
[17179576.316000] sd 4:0:1:0: Attached scsi disk sde
[17179576.316000] pata_get_dev_handle: ENTER: dev->bus_id='0000:00:1f.2'
[17179576.316000] pata_get_dev_handle: dev_handle: 0xdffe7300, parent_handle:
0xdf96fcc0
[17179576.316000] pata_get_dev_handle: for dev=0x1f.2, addr=0x1f0002,
parent=0xdff73a00, *handle=0xdffe7300
[17179576.316000] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xF008 irq
15
[17179576.652000] ata6: dev 0 cfg 00:85c0 49:0b00 82:0210 83:5000 84:4000
85:0210 86:1000 87:4000 88:101f 93:4101
[17179576.652000] ata6: dev 0 ATAPI, max UDMA/66
[17179576.652000] ata_acpi_push_id: skipping for PATA mode
[17179576.652000] ata6: dev 0 configured for UDMA/66
[17179576.652000] pata_get_dev_handle: ENTER: dev->bus_id='0000:00:1f.2'
[17179576.652000] pata_get_dev_handle: dev_handle: 0xdffe7300, parent_handle:
0xdf96fcc0
[17179576.652000] pata_get_dev_handle: for dev=0x1f.2, addr=0x1f0002,
parent=0xdff73a00, *handle=0xdffe7300
[17179576.652000] do_drive_get_GTF: drive w/ adr=0: v: 0xdffe7ca0
[17179576.652000] scsi5 : ata_piix
[17179576.652000] Vendor: SONY Model: DVD RW DW-Q120A Rev: PYS1
[17179576.652000] Type: CD-ROM ANSI SCSI
revision: 05
[17179576.652000] pata_get_dev_handle: ENTER: dev->bus_id='0000:00:1f.2'
[17179576.652000] pata_get_dev_handle: dev_handle: 0xdffe7300, parent_handle:
0xdf96fcc0
[17179576.652000] pata_get_dev_handle: for dev=0x1f.2, addr=0x1f0002,
parent=0xdff73a00, *handle=0xdffe7300
[17179577.356000] usbcore: registered new driver usbfs
[17179577.356000] usbcore: registered new driver hub
[17179577.356000] USB Universal Host Controller Interface driver v2.3
[17179577.356000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) ->
IRQ 185
[17179577.356000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[17179577.356000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[17179577.356000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus
number 1
[17179577.356000] uhci_hcd 0000:00:1d.0: irq 185, io base 0x0000c400
[17179577.356000] hub 1-0:1.0: USB hub found
[17179577.356000] hub 1-0:1.0: 2 ports detected
[17179577.368000] ieee1394: Initialized config rom entry `ip1394'
[17179577.460000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) ->
IRQ 193
[17179577.460000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[17179577.460000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[17179577.460000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus
number 2
[17179577.460000] uhci_hcd 0000:00:1d.1: irq 193, io base 0x0000c000
[17179577.460000] hub 2-0:1.0: USB hub found
[17179577.460000] hub 2-0:1.0: 2 ports detected
[17179577.564000] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) ->
IRQ 169
[17179577.564000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[17179577.564000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[17179577.564000] PCI: cache line size of 128 is not supported by device
0000:00:1d.7
[17179577.564000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus
number 3
[17179577.564000] ehci_hcd 0000:00:1d.7: irq 169, io mem 0xfc200000
[17179577.568000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10
Dec 2004
[17179577.568000] hub 3-0:1.0: USB hub found
[17179577.568000] hub 3-0:1.0: 4 ports detected
[17179577.672000] ohci1394: $Rev: 1313 $ Ben Collins <[EMAIL PROTECTED]>
[17179577.672000] ACPI: PCI Interrupt 0000:04:03.0[A] -> GSI 20 (level, low) ->
IRQ 201
[17179577.720000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[201]
MMIO=[fc125000-fc1257ff] Max Packet=[2048]
[17179577.756000] ide0: I/O resource 0x1F0-0x1F7 not free.
[17179577.756000] ide0: ports already in use, skipping probe
[17179577.756000] ide1: I/O resource 0x170-0x177 not free.
[17179577.756000] ide1: ports already in use, skipping probe
[17179577.824000] Attempting manual resume
[17179577.848000] EXT3-fs: mounted filesystem with ordered data mode.
[17179577.864000] kjournald starting. Commit interval 5 seconds
[17179577.956000] usb 3-1: new high speed USB device using ehci_hcd and address
2
[17179578.088000] hub 3-1:1.0: USB hub found
[17179578.088000] hub 3-1:1.0: 4 ports detected
[17179579.104000] ieee1394: Host added: ID:BUS[0-00:1023]
GUID[0011d800004edea0]
[17179584.992000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[17179584.992000] sd 1:0:0:0: Attached scsi generic sg1 type 0
[17179584.992000] sd 3:0:0:0: Attached scsi generic sg2 type 0
[17179584.992000] sd 4:0:0:0: Attached scsi generic sg3 type 0
[17179584.992000] sd 4:0:1:0: Attached scsi generic sg4 type 0
[17179584.992000] 5:0:0:0: Attached scsi generic sg5 type 5
[17179585.784000] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[17179585.784000] Uniform CD-ROM driver Revision: 3.20
[17179585.784000] sr 5:0:0:0: Attached scsi CD-ROM sr0
[17179587.144000] Linux agpgart interface v0.101 (c) Dave Jones
[17179587.148000] agpgart: Detected an Intel i875 Chipset.
[17179587.152000] agpgart: AGP aperture is 128M @ 0xf0000000
[17179587.340000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[17179587.344000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[17179587.616000] Real Time Clock Driver v1.12
[17179587.668000] nvidia: module license 'NVIDIA' taints kernel.
[17179587.672000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) ->
IRQ 185
[17179587.672000] NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-8776 Mon
Oct 16 21:56:04 PDT 2006
[17179587.872000] Intel(R) PRO/1000 Network Driver - version 7.0.33-k2
[17179587.872000] Copyright (c) 1999-2005 Intel Corporation.
[17179587.872000] ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 18 (level, low) ->
IRQ 177
[17179587.872000] PCI: Setting latency timer of device 0000:02:01.0 to 64
[17179587.940000] e1000: 0000:02:01.0: e1000_probe: (PCI:33MHz:32-bit)
00:13:d4:90:19:c0
[17179587.940000] Floppy drive(s): fd0 is 1.44M
[17179587.944000] input: PC Speaker as /class/input/input1
[17179587.948000] hw_random hardware driver 1.0.0 loaded
[17179587.960000] FDC 0 is a post-1991 82077
[17179587.980000] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) ->
IRQ 209
[17179587.980000] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[17179588.084000] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
[17179588.104000] parport: PnPBIOS parport detected.
[17179588.104000] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[17179588.136000] logips2pp: Detected unknown logitech mouse model 101
[17179588.404000] intel8x0_measure_ac97_clock: measured 52267 usecs
[17179588.404000] intel8x0: clocking to 48000
[17179588.600000] input: ImExPS/2 Logitech Explorer Mouse as /class/input/input2
[17179589.208000] ts: Compaq touchscreen protocol output
[17179589.752000] e1000: eth0: e1000_watchdog_task: NIC Link is Up 100 Mbps
Full Duplex
[17179589.756000] ACPI: PCI Interrupt 0000:04:09.0[A] -> GSI 21 (level, low) ->
IRQ 217
[17179590.760000] NET: Registered protocol family 17
[17179590.824000] lp0: using parport0 (interrupt-driven).
[17179590.856000] sbp2: $Rev: 1306 $ Ben Collins <[EMAIL PROTECTED]>
[17179590.856000] ieee1394: sbp2: Driver forced to serialize I/O
(serialize_io=1)
[17179590.856000] ieee1394: sbp2: Try serialize_io=0 for better performance
[17179590.896000] Adding 2048276k swap on /dev/sdd3. Priority:-1 extents:1
across:2048276k
[17179591.196000] EXT3 FS on sdd2, internal journal
[17179591.344000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[17179591.344000] md: bitmap version 4.39
[17179592.144000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: [EMAIL
PROTECTED]
[17179593.588000] NET: Registered protocol family 10
[17179593.588000] lo: Disabled Privacy Extensions
[17179593.588000] IPv6 over IPv4 tunneling driver
[17179596.768000] cdrom: open failed.
[17179597.772000] kjournald starting. Commit interval 5 seconds
[17179597.772000] EXT3 FS on sdd1, internal journal
[17179597.772000] EXT3-fs: mounted filesystem with ordered data mode.
[17179597.776000] kjournald starting. Commit interval 5 seconds
[17179597.776000] EXT3 FS on sda1, internal journal
[17179597.776000] EXT3-fs: mounted filesystem with ordered data mode.
[17179597.780000] kjournald starting. Commit interval 5 seconds
[17179597.780000] EXT3 FS on sdb1, internal journal
[17179597.780000] EXT3-fs: mounted filesystem with ordered data mode.
[17179597.784000] kjournald starting. Commit interval 5 seconds
[17179597.784000] EXT3 FS on sdc1, internal journal
[17179597.784000] EXT3-fs: mounted filesystem with ordered data mode.
[17179597.788000] kjournald starting. Commit interval 5 seconds
[17179597.788000] EXT3 FS on sde1, internal journal
[17179597.788000] EXT3-fs: mounted filesystem with ordered data mode.
[17179603.912000] eth0: no IPv6 routers present
[17179604.160000] ACPI: Power Button (FF) [PWRF]
[17179604.160000] ACPI: Power Button (CM) [PWRB]
[17179604.248000] ibm_acpi: ec object not found
[17179604.276000] pcc_acpi: loading...
[17179611.796000] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
[17179611.796000] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[17179611.796000] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
[17179612.552000] ppdev: user-space parallel port driver
[17179613.152000] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[17179613.152000] apm: overridden by ACPI.
[17179616.436000] device eth0 entered promiscuous mode
[17179619.384000] Bluetooth: Core ver 2.8
[17179619.384000] NET: Registered protocol family 31
[17179619.384000] Bluetooth: HCI device and connection manager initialized
[17179619.384000] Bluetooth: HCI socket layer initialized
[17179619.396000] Bluetooth: L2CAP ver 2.8
[17179619.396000] Bluetooth: L2CAP socket layer initialized
[17179619.412000] Bluetooth: RFCOMM socket layer initialized
[17179619.412000] Bluetooth: RFCOMM TTY layer initialized
[17179619.412000] Bluetooth: RFCOMM ver 1.7
[17179620.360000] /dev/vmmon[5463]: Module vmmon: registered with major=10
minor=165
[17179620.360000] /dev/vmmon[5463]: Module vmmon: initialized
[17179620.748000] /dev/vmnet: open called by PID 5487 (vmnet-bridge)
[17179620.748000] /dev/vmnet: hub 0 does not exist, allocating memory.
[17179620.748000] /dev/vmnet: port on hub 0 successfully opened
[17179620.748000] bridge-eth0: enabling the bridge
[17179620.748000] bridge-eth0: up
[17179620.748000] bridge-eth0: already up
[17179620.748000] bridge-eth0: attached
[17179620.844000] /dev/vmnet: open called by PID 5501 (vmnet-natd)
[17179620.844000] /dev/vmnet: hub 8 does not exist, allocating memory.
[17179620.844000] /dev/vmnet: port on hub 8 successfully opened
[17179630.788000] /dev/vmnet: open called by PID 5599 (vmnet-netifup)
[17179630.788000] /dev/vmnet: hub 1 does not exist, allocating memory.
[17179630.788000] /dev/vmnet: port on hub 1 successfully opened
[17179630.800000] /dev/vmnet: open called by PID 5600 (vmnet-netifup)
[17179630.800000] /dev/vmnet: port on hub 8 successfully opened
[17179630.864000] /dev/vmnet: open called by PID 5626 (vmnet-dhcpd)
[17179630.864000] /dev/vmnet: port on hub 8 successfully opened
[17179630.864000] /dev/vmnet: open called by PID 5611 (vmnet-dhcpd)
[17179630.868000] /dev/vmnet: port on hub 1 successfully opened
[17179641.080000] vmnet8: no IPv6 routers present
[17179641.412000] vmnet1: no IPv6 routers present
[17179749.504000] usb 3-1.2: new high speed USB device using ehci_hcd and
address 3
[17179749.752000] Initializing USB Mass Storage driver...
[17179749.752000] scsi6 : SCSI emulation for USB Mass Storage devices
[17179749.752000] usb-storage: device found at 3
[17179749.752000] usb-storage: waiting for device to settle before scanning
[17179749.752000] usbcore: registered new driver usb-storage
[17179749.752000] USB Mass Storage support registered.
[17179749.768000] usbcore: registered new driver hiddev
[17179749.772000] hiddev96: USB HID v1.10 Device [Western Digital External HDD]
on usb-0000:00:1d.7-1.2
[17179749.772000] usbcore: registered new driver usbhid
[17179749.772000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[17179754.752000] Vendor: WD Model: 3200JB External Rev: 0112
[17179754.752000] Type: Direct-Access ANSI SCSI
revision: 00
[17179754.756000] SCSI device sdf: 625142448 512-byte hdwr sectors (320073 MB)
[17179754.756000] sdf: assuming drive cache: write through
[17179754.756000] SCSI device sdf: 625142448 512-byte hdwr sectors (320073 MB)
[17179754.756000] sdf: assuming drive cache: write through
[17179754.756000] sdf: sdf1
[17179754.760000] sd 6:0:0:0: Attached scsi disk sdf
[17179754.760000] sd 6:0:0:0: Attached scsi generic sg6 type 0
[17179754.760000] usb-storage: device scan complete
[17179755.188000] FAT: utf8 is not a recommended IO charset for FAT
filesystems, filesystem will be case sensitive!
[17183582.976000] NET: Registered protocol family 4
[17183727.344000] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
[17183727.344000] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[17183727.344000] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
[17185525.336000] e1000: eth0: e1000_watchdog_task: NIC Link is Down
[17185555.324000] e1000: eth0: e1000_watchdog_task: NIC Link is Up 100 Mbps
Full Duplex
[17185570.080000] e1000: eth0: e1000_watchdog_task: NIC Link is Down
[17191061.160000] e1000: eth0: e1000_watchdog_task: NIC Link is Up 100 Mbps
Full Duplex
[17254891.088000] /dev/vmnet: open called by PID 13921 (vmware-vmx)
[17254891.088000] bridge-eth0: enabled promiscuous mode
[17254891.088000] /dev/vmnet: port on hub 0 successfully opened
[17254891.400000] /dev/vmmon[13927]: host clock rate change request 0 -> 19
[17254897.820000] sr 5:0:0:0: Device not ready.
[17254897.832000] sr 5:0:0:0: Device not ready.
[17254897.840000] sr 5:0:0:0: Device not ready.
[17254897.848000] sr 5:0:0:0: Device not ready.
[17254897.860000] sr 5:0:0:0: Device not ready.
[17254897.868000] sr 5:0:0:0: Device not ready.
[17254897.876000] sr 5:0:0:0: Device not ready.
[17254897.884000] sr 5:0:0:0: Device not ready.
[17254897.892000] sr 5:0:0:0: Device not ready.
[17254897.900000] sr 5:0:0:0: Device not ready.
[17254897.908000] sr 5:0:0:0: Device not ready.
[17254897.920000] sr 5:0:0:0: Device not ready.
[17254897.932000] sr 5:0:0:0: Device not ready.
[17254897.944000] sr 5:0:0:0: Device not ready.
[17254897.956000] sr 5:0:0:0: Device not ready.
[17254897.968000] sr 5:0:0:0: Device not ready.
[17254897.980000] sr 5:0:0:0: Device not ready.
[17254947.488000] /dev/vmmon[13927]: host clock rate change request 19 -> 1043
[17254958.692000] /dev/vmmon[13927]: host clock rate change request 1043 -> 1001
[17254969.300000] /dev/vmmon[13927]: host clock rate change request 1001 -> 2942
[17254979.300000] /dev/vmmon[13927]: host clock rate change request 2942 -> 1960
[17296896.192000] bridge-eth0: disabled promiscuous mode
[17296896.252000] /dev/vmmon[13921]: host clock rate change request 1960 -> 0
[17296896.256000] vmmon: Had to deallocate locked 3323 pages from vm driver
e416d000
[17296896.260000] vmmon: Had to deallocate AWE 4038 pages from vm driver
e416d000
[17297987.368000] u32 classifier
[17297987.368000] OLD policer on
[17297987.392000] Ingress scheduler: Classifier actions prefered over netfilter
[17341189.000000] Ingress scheduler: Classifier actions prefered over netfilter
[17341667.548000] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
[17341667.548000] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[17341667.548000] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
[17342232.360000] usb 3-1.3: new high speed USB device using ehci_hcd and
address 4
[17342232.544000] scsi7 : SCSI emulation for USB Mass Storage devices
[17342232.544000] usb-storage: device found at 4
[17342232.544000] usb-storage: waiting for device to settle before scanning
[17342237.552000] Vendor: Kingston Model: DataTraveler 2.0 Rev: 1.00
[17342237.552000] Type: Direct-Access ANSI SCSI
revision: 02
[17342237.560000] SCSI device sdg: 1001472 512-byte hdwr sectors (513 MB)
[17342237.564000] sdg: Write Protect is off
[17342237.564000] sdg: Mode Sense: 0b 00 00 08
[17342237.564000] sdg: assuming drive cache: write through
[17342237.572000] SCSI device sdg: 1001472 512-byte hdwr sectors (513 MB)
[17342237.572000] sdg: Write Protect is off
[17342237.572000] sdg: Mode Sense: 0b 00 00 08
[17342237.572000] sdg: assuming drive cache: write through
[17342237.572000] sdg: sdg1
[17342237.572000] sd 7:0:0:0: Attached scsi removable disk sdg
[17342237.572000] sd 7:0:0:0: Attached scsi generic sg7 type 0
[17342237.572000] usb-storage: device scan complete
[17342237.984000] FAT: utf8 is not a recommended IO charset for FAT
filesystems, filesystem will be case sensitive!
[17360076.920000] cdrom: This disc doesn't have any tracks I recognize!
[17360077.880000] Assertion failed! qc->n_elem >
0,drivers/scsi/libata-core.c,ata_fill_sg,line=2531
[17360107.856000] Assertion failed! qc->n_elem >
0,drivers/scsi/libata-core.c,ata_fill_sg,line=2531
[17360107.868000] Assertion failed! qc->n_elem >
0,drivers/scsi/libata-core.c,ata_fill_sg,line=2531
[17360107.888000] Assertion failed! qc->n_elem >
0,drivers/scsi/libata-core.c,ata_fill_sg,line=2531
lspci
: 0000:00:00.0 Host bridge: Intel Corporation 82875P/E7210 Memory Controller
Hub (rev 02)
Subsystem: ASUSTeK Computer Inc.: Unknown device 80f6
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR-
Latency: 0
Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
Capabilities: [e4] #09 [2106]
Capabilities: [a0] AGP version 3.0
Status: RQ=32 Iso- ArqSz=2 Cal=2 SBA+ ITACoh- GART64- HTrans-
64bit- FW+ AGP3+ Rate=x4,x8
Command: RQ=1 ArqSz=0 Cal=2 SBA+ AGP+ GART64- 64bit- FW- Rate=x8
0000:00:01.0 PCI bridge: Intel Corporation 82875P Processor to AGP Controller
(rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: f8000000-faffffff
Prefetchable memory behind bridge: e0000000-efffffff
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
0000:00:03.0 PCI bridge: Intel Corporation 82875P/E7210 Processor to PCI to CSA
Bridge (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 32
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: fb000000-fc0fffff
Prefetchable memory behind bridge: 60000000-600fffff
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
0000:00:1c.0 PCI bridge: Intel Corporation 6300ESB 64-bit PCI-X Bridge (rev 02)
(prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR+
Latency: 32, Cache Line Size: 0x10 (64 bytes)
Bus: primary=00, secondary=03, subordinate=03, sec-latency=64
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: 00000000fff00000-0000000000000000
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: [50] PCI-X bridge device.
Secondary Status: 64bit+, 133MHz-, SCD-, USC-, SCO-, SRD- Freq=1
Status: Bus=0 Dev=28 Func=0 64bit+ 133MHz- SCD- USC-, SCO-, SRD-
: Upstream: Capacity=65535, Commitment Limit=0
: Downstream: Capacity=65535, Commitment Limit=0
0000:00:1d.0 USB Controller: Intel Corporation 6300ESB USB Universal Host
Controller (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc.: Unknown device 8117
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 185
Region 4: I/O ports at c400 [size=32]
0000:00:1d.1 USB Controller: Intel Corporation 6300ESB USB Universal Host
Controller (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc.: Unknown device 8117
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 193
Region 4: I/O ports at c000 [size=32]
0000:00:1d.4 System peripheral: Intel Corporation 6300ESB Watchdog Timer (rev
02)
Subsystem: ASUSTeK Computer Inc.: Unknown device 8117
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Region 0: Memory at fc201000 (32-bit, non-prefetchable) [size=16]
0000:00:1d.5 PIC: Intel Corporation 6300ESB I/O Advanced Programmable Interrupt
Controller (rev 02) (prog-if 20 [IO(X)-APIC])
Subsystem: ASUSTeK Computer Inc.: Unknown device 8117
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
Capabilities: [50] PCI-X non-bridge device.
Command: DPERE- ERO- RBC=0 OST=0
Status: Bus=0 Dev=29 Func=5 64bit+ 133MHz- SCD- USC-,
DC=simple, DMMRBC=0, DMOST=0, DMCRS=0, RSCEM-
0000:00:1d.7 USB Controller: Intel Corporation 6300ESB USB2 Enhanced Host
Controller (rev 02) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc.: Unknown device 8117
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin D routed to IRQ 169
Region 0: Memory at fc200000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 0a) (prog-if
00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: fc100000-fc1fffff
Prefetchable memory behind bridge: fff00000-000fffff
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
0000:00:1f.0 ISA bridge: Intel Corporation 6300ESB LPC Interface Controller
(rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
0000:00:1f.2 IDE interface: Intel Corporation 6300ESB SATA Storage Controller
(rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: ASUSTeK Computer Inc.: Unknown device 8117
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 177
Region 0: I/O ports at <unassigned>
Region 1: I/O ports at <unassigned>
Region 2: I/O ports at <unassigned>
Region 3: I/O ports at <unassigned>
Region 4: I/O ports at f000 [size=16]
0000:00:1f.3 SMBus: Intel Corporation 6300ESB SMBus Controller (rev 02)
Subsystem: ASUSTeK Computer Inc.: Unknown device 8117
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 5
Region 4: I/O ports at 0500 [size=32]
0000:00:1f.5 Multimedia audio controller: Intel Corporation 6300ESB AC'97 Audio
Controller (rev 02)
Subsystem: ASUSTeK Computer Inc.: Unknown device 80b0
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 209
Region 0: I/O ports at e000 [size=256]
Region 1: I/O ports at e400 [size=64]
Region 2: Memory at fc202000 (32-bit, non-prefetchable) [size=512]
Region 3: Memory at fc203000 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:01:00.0 VGA compatible controller: nVidia Corporation NV43 [GeForce
6600/GeForce 6600 GT] (rev a2) (prog-if 00 [VGA])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 248 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 185
Region 0: Memory at f8000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at e0000000 (32-bit, prefetchable) [size=256M]
Region 2: Memory at f9000000 (32-bit, non-prefetchable) [size=16M]
Expansion ROM at fa000000 [disabled] [size=128K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [44] AGP version 3.0
Status: RQ=256 Iso- ArqSz=0 Cal=3 SBA+ ITACoh- GART64- HTrans-
64bit- FW+ AGP3+ Rate=x4,x8
Command: RQ=32 ArqSz=2 Cal=0 SBA+ AGP+ GART64- 64bit- FW-
Rate=x8
0000:02:01.0 Ethernet controller: Intel Corporation 82547GI Gigabit Ethernet
Controller
Subsystem: ASUSTeK Computer Inc.: Unknown device 8115
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (63750ns min), Cache Line Size: 0x08 (32 bytes)
Interrupt: pin A routed to IRQ 177
Region 0: Memory at fc020000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at fc000000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at a000 [size=32]
Expansion ROM at 60000000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
0000:04:03.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A
IEEE-1394a-2000 Controller (PHY/Link) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. K8N4-E Mainboard
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (500ns min, 1000ns max), Cache Line Size: 0x08 (32 bytes)
Interrupt: pin A routed to IRQ 201
Region 0: Memory at fc125000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at fc120000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME+
0000:04:04.0 RAID bus controller: Promise Technology, Inc. PDC20319 (FastTrak
S150 TX4) (rev 02)
Subsystem: ASUSTeK Computer Inc.: Unknown device 80f5
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 96 (1000ns min, 4500ns max), Cache Line Size: 0x90 (576 bytes)
Interrupt: pin A routed to IRQ 169
Region 0: I/O ports at b000 [size=64]
Region 1: I/O ports at b400 [size=16]
Region 2: I/O ports at b800 [size=128]
Region 3: Memory at fc124000 (32-bit, non-prefetchable) [size=4K]
Region 4: Memory at fc100000 (32-bit, non-prefetchable) [size=128K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:04:09.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev
10)
Subsystem: Hercules: Unknown device a650
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (500ns min, 6000ns max)
Interrupt: pin A routed to IRQ 217
Region 0: I/O ports at bc00 [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
** Affects: Ubuntu
Importance: Undecided
Status: Unconfirmed
--
System freeze at startup
https://launchpad.net/bugs/78709
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
