We are sorry for not being able to give feedback to your bug report earlier.
I am not an expert at Xorg, but it does looks like X was not able to connect to your monitor to read it's supported modes, synchronization speed capabilities, etc: (II) NV(0): I2C bus "DDC" initialized. (II) NV(0): Probing for EDID on I2C bus A... (II) NV(0): I2C device "DDC:ddc2" registered at address 0xA0. (II) NV(0): I2C device "DDC:ddc2" removed. (II) NV(0): ... none found (--) NV(0): HW is currently programmed for CRT (II) NV(0): Using CRT on CRTC 0 (--) NV(0): VideoRAM: 8192 kBytes (==) NV(0): Using gamma correction (1.0, 1.0, 1.0) (II) NV(0): Configured Monitor: Using default hsync range of 31.50-37.90 kHz (II) NV(0): Configured Monitor: Using default vrefresh range of 50.00-70.00 Hz (WW) NV(0): Unable to estimate virtual size (II) NV(0): Clock range: 12.00 to 350.00 MHz (II) NV(0): Not using default mode "640x350" (vrefresh out of range) What is the mark and model of your monitor? Because it has been a long while since you reported this bug, it could be interesting to test it with upcoming Jaunty version to make sure the issue still happens there with the latest code. ISO images are available at http://cdimages.ubuntu.com/daily/current/ - if you can reproduce it in the LiveCD environment, you shouldn't need to modify your installed system. ** Summary changed: - Geforce 2 MX max resolution 800x600 in 8.10 + 8.10 alpha, EDID failing -> max 800x600 and Geforce 2 MX with VideoRAM: 8192 kBytes? -- 8.10 alpha, EDID failing -> max 800x600 and Geforce 2 MX with VideoRAM: 8192 kBytes? https://bugs.launchpad.net/bugs/268616 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
