i had a try with the latest Jaunty alpha livecd with what seems like interesting results: it seems like the device gets recognised as usb storage first, only the usb storage scan takes a while and meanwhile the modem gets detected, then the storage gets mounted and the modem seems not usable, or at least i cant find device nodes and network manager does not allow me to make a connection as it does in 8.10 with the hso driver/userspace blob a subsequent pull-out/stick-in of the stick seems to trigger only the storage driver
this is dmesg covering initial stick-in/pull-out/stick-in: [ 429.316100] usb 3-1: new full speed USB device using uhci_hcd and address 2 [ 429.481624] usb 3-1: configuration #1 chosen from 1 choice [ 433.413371] Initializing USB Mass Storage driver... [ 433.416464] scsi2 : SCSI emulation for USB Mass Storage devices [ 433.416999] usbcore: registered new interface driver usb-storage [ 433.417007] USB Mass Storage support registered. [ 433.418311] usb-storage: device found at 2 [ 433.418316] usb-storage: waiting for device to settle before scanning [ 433.542594] hso: /build/buildd/linux-2.6.28/drivers/net/usb/hso.c: 1.2 Option Wireless [ 433.542653] usbcore: registered new interface driver hso [ 438.417519] usb-storage: device scan complete [ 438.420501] scsi 2:0:0:0: CD-ROM ZCOPTION HSDPA Modem 3.00 PQ: 0 ANSI: 2 [ 438.459439] sr1: scsi-1 drive [ 438.459607] sr 2:0:0:0: Attached scsi CD-ROM sr1 [ 438.459717] sr 2:0:0:0: Attached scsi generic sg2 type 5 [ 441.694558] ISO 9660 Extensions: Microsoft Joliet Level 1 [ 441.700592] ISOFS: changing to secondary root [ 1178.416150] usb 3-1: USB disconnect, address 2 [ 1203.708066] usb 3-1: new full speed USB device using uhci_hcd and address 3 [ 1203.873607] usb 3-1: configuration #1 chosen from 1 choice [ 1203.875440] scsi3 : SCSI emulation for USB Mass Storage devices [ 1203.876914] usb-storage: device found at 3 [ 1203.876919] usb-storage: waiting for device to settle before scanning [ 1208.877393] usb-storage: device scan complete [ 1208.880509] scsi 3:0:0:0: CD-ROM ZCOPTION HSDPA Modem 3.00 PQ: 0 ANSI: 2 [ 1208.916297] sr1: scsi-1 drive [ 1208.916468] sr 3:0:0:0: Attached scsi CD-ROM sr1 [ 1208.916582] sr 3:0:0:0: Attached scsi generic sg2 type 5 [ 1211.681415] ISO 9660 Extensions: Microsoft Joliet Level 1 [ 1211.690418] ISOFS: changing to secondary root the device concerned has the following usbid: Bus 003 Device 003: ID 0af0:6971 Option the hso driver remains loaded until stick is pulled no device nodes to be found: no /dev/*hs* or /dev/*HS* -- USB id 0af0:6911 should use hso and not 'option' driver https://bugs.launchpad.net/bugs/256296 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
