I just bought a brand new PH Photosmart C6280 All-in-one and I have the problems explained in the origtional poster of this bug. Iam using HArdy 8.04-1 (with all updates).
What works: detecting and Installing If I print to the printer I get the message "printer not connected" or "Paper jam". My logs (messages, syslog, etc.) are filling up with messages of errors. Sometimes after a few minutes a piece of paper is comming out of the printer with a single line of a document, but mostly only garbage. lsmod | grep usb usb_storage 73664 0 libusual 19108 1 usb_storage usblp 15872 0 usbhid 32128 0 hid 38784 1 usbhid scsi_mod 151436 6 usb_storage,sbp2,sr_mod,sg,sd_mod,libata usbcore 146412 8 usb_storage,libusual,usblp,wacom,usbhid,ehci_hcd,ohci_hcd tail -f /var/log/messages Dec 7 12:14:46 test-desktop kernel: [14975.146143] usb 3-3: reset high speed USB device using ehci_hcd and address 48 Dec 7 12:14:47 test-desktop kernel: [14975.689654] usb 3-3: reset high speed USB device using ehci_hcd and address 48 Dec 7 12:14:47 test-desktop kernel: [14976.233198] usb 3-3: reset high speed USB device using ehci_hcd and address 48 Dec 7 12:14:48 test-desktop kernel: [14976.752771] usb 3-3: reset high speed USB device using ehci_hcd and address 48 Dec 7 12:14:48 test-desktop kernel: [14977.162925] usb 3-3: USB disconnect, address 48 Dec 7 12:14:48 test-desktop kernel: [14977.163225] usblp0: removed Dec 7 12:14:48 test-desktop kernel: [14977.276368] usb 3-3: new high speed USB device using ehci_hcd and address 49 Dec 7 12:14:49 test-desktop kernel: [14977.819875] usb 3-3: new high speed USB device using ehci_hcd and address 50 Dec 7 12:14:49 test-desktop kernel: [14978.363426] usb 3-3: new high speed USB device using ehci_hcd and address 51 Dec 7 12:14:50 test-desktop kernel: [14978.884259] usb 3-3: new high speed USB device using ehci_hcd and address 52 Dec 7 12:15:08 test-desktop kernel: [14997.399541] usb 3-3: new high speed USB device using ehci_hcd and address 53 Dec 7 12:15:09 test-desktop kernel: [14997.943085] usb 3-3: new high speed USB device using ehci_hcd and address 54 Dec 7 12:15:09 test-desktop kernel: [14998.486632] usb 3-3: new high speed USB device using ehci_hcd and address 55 Dec 7 12:15:10 test-desktop kernel: [14999.006200] usb 3-3: new high speed USB device using ehci_hcd and address 56 If I look into the syslog I see that the linux kernel is constantly claming that the aparatus is not accepting the address: tail -f /var/log/syslog Dec 7 12:26:29 test-desktop hal_lpadmin: Found configured printer: Photosmart_C6200_USB Dec 7 12:26:29 test-desktop NetworkManager: <debug> [1228649189.220612] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_3f0_6a11_MY87UHH31J0506_if1_printer_MY87UHH31J0506'). Dec 7 12:26:29 test-desktop NetworkManager: <debug> [1228649189.232485] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_3f0_6a11_MY87UHH31J0506_if1'). Dec 7 12:26:29 test-desktop NetworkManager: <debug> [1228649189.257562] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_3f0_6a11_MY87UHH31J0506_if2'). Dec 7 12:26:29 test-desktop NetworkManager: <debug> [1228649189.271583] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_3f0_6a11_MY87UHH31J0506_if3'). Dec 7 12:26:29 test-desktop NetworkManager: <debug> [1228649189.277772] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_3f0_6a11_MY87UHH31J0506'). Dec 7 12:26:29 test-desktop kernel: [15677.275757] usb 3-3: new high speed USB device using ehci_hcd and address 48 Dec 7 12:26:29 test-desktop kernel: [15677.683396] usb 3-3: device not accepting address 48, error -71 Dec 7 12:26:29 test-desktop kernel: [15677.795389] usb 3-3: new high speed USB device using ehci_hcd and address 49 Dec 7 12:26:30 test-desktop kernel: [15678.202968] usb 3-3: device not accepting address 49, error -71 lpinfo -v network socket network beh direct hal direct hpfax direct hp:/usb/Photosmart_C6200_series?serial=MY87UHH31J0506 network http network ipp network lpd direct parallel:/dev/lp0 file cups-pdf:/ direct scsi network smb The output of the printingbuginfo script is attached. If you can see in the the output. The printer is not shown in the lsusb list, but if you run the command twice then printer will show up (see below). [EMAIL PROTECTED]:~$ lsusb Bus 003 Device 003: ID 0424:a700 Standard Microsystems Corp. Bus 003 Device 001: ID 0000:0000 Bus 002 Device 001: ID 0000:0000 Bus 001 Device 003: ID 056a:0015 Wacom Co., Ltd Bus 001 Device 001: ID 0000:0000 [EMAIL PROTECTED]:~$ lsusb Bus 003 Device 016: ID 03f0:6a11 Hewlett-Packard Bus 003 Device 003: ID 0424:a700 Standard Microsystems Corp. Bus 003 Device 001: ID 0000:0000 Bus 002 Device 001: ID 0000:0000 Bus 001 Device 003: ID 056a:0015 Wacom Co., Ltd Bus 001 Device 001: ID 0000:0000 Finally the printer is working fine with XP + USB on the same computer so it seems not to bee a printer problem in my point of view. Also printing via ethernet in Ubuntu works fine but is very cumbersum in my case. Hoping on proper solution... René ** Attachment added: "Output printingbuginfo script" http://launchpadlibrarian.net/20277819/printingbuginfo -- [Hardy]HP printer is not detected properly by HPLIP https://bugs.launchpad.net/bugs/181242 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
