I have the problem since Hardy. It's normal before that the driver wasn't iwl3945 but ipw3945.
Le samedi 06 décembre 2008 à 19:12 +0000, Rune Evjen a écrit : > Reloading iwl3945 module doesn't help for me. > > Geek87, > > did wireless work for you using 2.6.24-19-generic (in Hardy) ? > > Wireless was working fine on my computer until 2.6.24-19-generic, after this > (in both Hardy and Intrepid) it has been completely broken. It does however > work fine with an Zydas USB device. > > Davidiam, > > can you please check if you have the same iwl hardware as me ? > > modinfo iwl3945: > filename: > /lib/modules/2.6.27-10-generic/kernel/drivers/net/wireless/iwlwifi/iwl3945.ko > license: GPL > author: Copyright(c) 2003-2008 Intel Corporation > version: 1.2.26ks > description: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver > for Linux > srcversion: B8570227953474842B9209D > alias: pci:v00008086d00004227sv*sd*bc*sc*i* > alias: pci:v00008086d00004222sv*sd*bc*sc*i* > alias: pci:v00008086d00004227sv*sd00001014bc*sc*i* > alias: pci:v00008086d00004222sv*sd00001044bc*sc*i* > alias: pci:v00008086d00004222sv*sd00001034bc*sc*i* > alias: pci:v00008086d00004222sv*sd00001005bc*sc*i* > depends: mac80211,led-class,cfg80211,rfkill > vermagic: 2.6.27-10-generic SMP mod_unload modversions 586 > parm: antenna:select antenna (1=Main, 2=Aux, default 0 [both]) > (int) > parm: disable:manually disable the radio (default 0 [radio on]) > (int) > parm: hwcrypto:using hardware crypto engine (default 0 [software]) > (int) > parm: debug:debug output mask (int) > parm: disable_hw_scan:disable hardware scanning (default 0) (int) > parm: queues_num:number of hw queues. (int) > parm: qos_enable:enable all QoS functionality (int) > > > lspci -vv (extract): > > 03:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan] > Network Connection (rev 02) > Subsystem: Intel Corporation Device 1011 > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Interrupt: pin A routed to IRQ 220 > Region 0: Memory at d2000000 (32-bit, non-prefetchable) [size=4K] > Capabilities: [c8] Power Management version 2 > Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA > PME(D0+,D1-,D2-,D3hot+,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 > Enable+ > Address: 00000000fee0300c Data: 414a > Capabilities: [e0] Express (v1) Legacy Endpoint, MSI 00 > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 > unlimited > ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset- > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- > Unsupported- > RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ > MaxPayload 128 bytes, MaxReadReq 128 bytes > DevSta: CorrErr+ UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- > TransPend- > LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 > <128ns, L1 <64us > ClockPM+ Suprise- LLActRep- BwNot- > LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- > CommClk+ > ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- > BWMgmt- ABWMgmt- > Capabilities: [100] Advanced Error Reporting <?> > Capabilities: [140] Device Serial Number 4d-ff-ca-ff-ff-de-18-00 > Kernel driver in use: iwl3945 > Kernel modules: iwl3945 > -- iwl3945 not able to associate with kernel 2.6.26 and 2.6.27 https://bugs.launchpad.net/bugs/264881 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
