I'm under Kubuntu 8.10, upgraded from 8.04 (spanish). I recently
installed a SATA DVD and I'm having a similar problem. Something I noted
while looking through this is that my paralell ata HD is not hda, but
sda, but that doesn't affect the way it works. I think that's why the
dvd gets reported as scsi instead of sata.
I'm on a Asus A7N8X deluxe revision 2.0, Nforce 2 chipset.
uname -r
2.6.27-7-generic
sudo lshw -C disk
*-cdrom
description: SCSI CD-ROM
physical id: 0.0.0
bus info: [EMAIL PROTECTED]:0.0.0
logical name: /dev/cdrom2
logical name: /dev/scd0
logical name: /dev/sr0
capabilities: audio
configuration: status=ready
*-disk
description: ATA Disk
product: Maxtor 6Y080L0
vendor: Maxtor
physical id: 0.0.0
bus info: [EMAIL PROTECTED]:0.0.0
logical name: /dev/sda
version: YAR4
serial: Y24R5FNE
size: 76GiB (81GB)
capabilities: partitioned partitioned:dos
configuration: ansiversion=5 signature=05ad05ad
ls /dev -l | grep cd
lrwxrwxrwx 1 root root 4 2008-11-08 07:22 cdrom2 -> scd0
crw-rw-rw- 1 root tty 2, 221 2008-11-08 07:22 ptycd
brw-rw----+ 1 root cdrom 11, 0 2008-11-08 07:22 scd0
crw-rw---- 1 root cdrom 21, 0 2008-11-08 07:22 sg0
lrwxrwxrwx 1 root root 4 2008-11-08 07:22 sr0 -> scd0
crw-rw-rw- 1 root tty 3, 221 2008-11-08 07:22 ttycd
sudo hdparm -I /dev/scd0
/dev/scd0:
ATAPI CD-ROM, with removable media
Model Number: Optiarc DVD RW AD-7200S
Firmware Revision: 1.60
Standards:
Likely used CD-ROM ATAPI-1
Configuration:
DRQ response: 50us.
Packet size: 12 bytes
Capabilities:
LBA, IORDY(cannot be disabled)
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=120ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
Power Management feature set
PACKET command feature set
DEVICE_RESET command
NOP cmd
* SATA-I signaling speed (1.5Gb/s)
* Host-initiated interface power management
* Phy event counters
Device-initiated interface power management
* Software settings preservation
mount /dev/scd0
mount: dispositivo de bloques /dev/scd0 está protegido contra escritura; se
monta como sólo lectura
mount: wrong fs type, bad option, bad superblock on /dev/scd0,
missing codepage or helper program, or other error
En algunos casos se encuentra información en syslog, pruebe
dmesg | tail o algo parecido
--
mounting dvd says: block device is write protected
https://bugs.launchpad.net/bugs/244445
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
