read previous posts in thread.. backports! On Thu, Nov 6, 2008 at 2:37 AM, Ivo Jimenez <[EMAIL PROTECTED]> wrote: > Hi, > > I'm also having this issue. The output of dmesg: > > 138.288033] usb 2-10: new high speed USB device using ehci_hcd and address 17 > [ 138.581980] usb 2-10: configuration #1 chosen from 1 choice > [ 138.851273] phy10: Selected rate control algorithm 'pid' > [ 138.860059] Registered led device: rt73usb-phy10:radio > [ 138.860187] Registered led device: rt73usb-phy10:assoc > [ 138.860269] Registered led device: rt73usb-phy10:quality > [ 142.908455] firmware: requesting rt73.bin > [ 143.002097] ADDRCONF(NETDEV_UP): wlan0: link is not ready > [ 149.372753] usb 2-10: USB disconnect, address 17 > [ 149.384792] phy10 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 > failed for offset 0x3040 with error -19. > [ 149.384819] phy10 -> rt2x00usb_vendor_request: Error - Vendor Request 0x06 > failed for offset 0x3040 with error -19. > [ 149.384829] phy10 -> rt2x00usb_vendor_request: Error - Vendor Request 0x06 > failed for offset 0x3028 with error -19. > [ 149.384837] phy10 -> rt2x00usb_vendor_request: Error - Vendor Request 0x06 > failed for offset 0x3064 with error -19. > [ 149.384845] phy10 -> rt2x00usb_vendor_request: Error - Vendor Request 0x0c > failed for offset 0x0000 with error -19. > [ 149.384904] phy10 -> rt2x00usb_vendor_request: Error - Vendor Request 0x0a > failed for offset 0x0000 with error -19. > [ 149.388624] phy10 -> rt2x00usb_vendor_request: Error - Vendor Request 0x0a > failed for offset 0x0000 with error -19. > [ 149.388710] phy10 -> rt2x00usb_vendor_request: Error - Vendor Request 0x0a > failed for offset 0x0000 with error -19. > [ 149.388773] phy10 -> rt2x00usb_vendor_request: Error - Vendor Request 0x0a > failed for offset 0x0000 with error -19. > [ 149.800055] usb 2-10: new high speed USB device using ehci_hcd and address > 18 > [ 150.095898] usb 2-10: configuration #1 chosen from 1 choice > [ 150.367588] phy11: Selected rate control algorithm 'pid' > [ 150.369743] Registered led device: rt73usb-phy11:radio > [ 150.369785] Registered led device: rt73usb-phy11:assoc > [ 150.369827] Registered led device: rt73usb-phy11:quality > [ 154.420685] firmware: requesting rt73.bin > [ 154.509224] ADDRCONF(NETDEV_UP): wlan0: link is not ready > [ 161.020421] usb 2-10: USB disconnect, address 18 > [ 161.025345] phy11 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 > failed for offset 0x3040 with error -19. > [ 161.025360] phy11 -> rt2x00usb_vendor_request: Error - Vendor Request 0x06 > failed for offset 0x3040 with error -19. > [ 161.025369] phy11 -> rt2x00usb_vendor_request: Error - Vendor Request 0x06 > failed for offset 0x3028 with error -19. > [ 161.025376] phy11 -> rt2x00usb_vendor_request: Error - Vendor Request 0x06 > failed for offset 0x3064 with error -19. > [ 161.025384] phy11 -> rt2x00usb_vendor_request: Error - Vendor Request 0x0c > failed for offset 0x0000 with error -19. > [ 161.025432] phy11 -> rt2x00usb_vendor_request: Error - Vendor Request 0x0a > failed for offset 0x0000 with error -19. > [ 161.025632] phy11 -> rt2x00usb_vendor_request: Error - Vendor Request 0x0a > failed for offset 0x0000 with error -19. > [ 161.025686] phy11 -> rt2x00usb_vendor_request: Error - Vendor Request 0x0a > failed for offset 0x0000 with error -19. > [ 161.025750] phy11 -> rt2x00usb_vendor_request: Error - Vendor Request 0x0a > failed for offset 0x0000 with error -19. > [ 161.424534] usb 2-10: new high speed USB device using ehci_hcd and address > 19 > [ 161.719986] usb 2-10: configuration #1 chosen from 1 choice > [ 161.985886] phy12: Selected rate control algorithm 'pid' > [ 161.987607] Registered led device: rt73usb-phy12:radio > [ 161.987652] Registered led device: rt73usb-phy12:assoc > [ 161.987692] Registered led device: rt73usb-phy12:quality > [ 166.060469] firmware: requesting rt73.bin > [ 166.148908] ADDRCONF(NETDEV_UP): wlan0: link is not ready > [ 182.479490] type=1503 audit(1225956827.624:6): > operation="inode_permission" requested_mask="r::" denied_mask="r::" fsuid=7 > name="/proc/8016/net/" pid=8016 profile="/usr/sbin/cupsd" > [ 182.483251] type=1503 audit(1225956827.628:7): operation="socket_create" > family="ax25" sock_type="dgram" protocol=0 pid=8016 profile="/usr/sbin/cupsd" > [ 182.484140] type=1503 audit(1225956827.632:8): operation="socket_create" > family="netrom" sock_type="seqpacket" protocol=0 pid=8016 > profile="/usr/sbin/cupsd" > [ 182.484158] type=1503 audit(1225956827.632:9): operation="socket_create" > family="rose" sock_type="dgram" protocol=0 pid=8016 profile="/usr/sbin/cupsd" > [ 182.484172] type=1503 audit(1225956827.632:10): operation="socket_create" > family="ipx" sock_type="dgram" protocol=0 pid=8016 profile="/usr/sbin/cupsd" > [ 182.484186] type=1503 audit(1225956827.632:11): operation="socket_create" > family="appletalk" sock_type="dgram" protocol=0 pid=8016 > profile="/usr/sbin/cupsd" > [ 182.484199] type=1503 audit(1225956827.632:12): operation="socket_create" > family="econet" sock_type="dgram" protocol=0 pid=8016 > profile="/usr/sbin/cupsd" > [ 182.484212] type=1503 audit(1225956827.632:13): operation="socket_create" > family="ash" sock_type="dgram" protocol=0 pid=8016 profile="/usr/sbin/cupsd" > [ 182.484225] type=1503 audit(1225956827.632:14): operation="socket_create" > family="x25" sock_type="seqpacket" protocol=0 pid=8016 > profile="/usr/sbin/cupsd" > [ 182.484348] type=1503 audit(1225956827.632:15): > operation="inode_permission" requested_mask="::r" denied_mask="::r" fsuid=7 > name="/proc/8016/net/dev" pid=8016 profile="/usr/sbin/cupsd" > > > I tried blacklisting it and installing from source following this thread but > unsuccessfully. > > http://tennessee.ubuntuforums.com/showthread.php?s=d7f83044800d52bc276869d2d6ee7fa2&t=934055 > > -- > rt73usb intrepid 8.10 beta -- wireless connection periodically lost; must > restart driver > https://bugs.launchpad.net/bugs/283759 > You received this bug notification because you are a direct subscriber > of the bug. > > Status in Ubuntu: New > Status in Mandriva Linux: In Progress > > Bug description: > I may have something.. So I blacklisted the recompiled/newly installed legacy > rt73 drivers, and i went back to using the rt73usb included initially with > intrepid. i was using the Internet as normal, and then it crapped out, and > these are the tail logs.. > > Quote: > Oct 15 07:53:19 jupiter2 NetworkManager: <debug> [1224071599.522971] > periodic_update(): Roamed from BSSID (none) ((none)) to 00:0F:3D:39:10:96 > (LODGER) > Oct 15 07:55:13 jupiter2 NetworkManager: <debug> [1224071713.601943] > periodic_update(): Roamed from BSSID 00:0F:3D:39:10:96 (LODGER) to (none) > ((none)) > Oct 15 07:55:19 jupiter2 NetworkManager: <debug> [1224071719.605557] > periodic_update(): Roamed from BSSID (none) ((none)) to 00:0F:3D:39:10:96 > (LODGER) > > ****** Connection seemed to crap out around this point!!!******** > > Oct 15 08:00:01 jupiter2 /USR/SBIN/CRON[9353]: (root) CMD ([ -x > /usr/sbin/update-motd ] && /usr/sbin/update-motd 2>/dev/null) > Oct 15 08:03:26 jupiter2 kernel: [ 4474.961767] usb 8-5.2: reset high speed > USB device using ehci_hcd and address 4 > Oct 15 08:10:01 jupiter2 /USR/SBIN/CRON[9577]: (root) CMD ([ -x > /usr/sbin/update-motd ] && /usr/sbin/update-motd 2>/dev/null) > Oct 15 08:17:01 jupiter2 /USR/SBIN/CRON[9828]: (root) CMD ( cd / && run-parts > --report /etc/cron.hourly) > Oct 15 08:20:01 jupiter2 /USR/SBIN/CRON[10010]: (root) CMD ([ -x > /usr/sbin/update-motd ] && /usr/sbin/update-motd 2>/dev/null) > Oct 15 08:22:12 jupiter2 kernel: [ 5601.528260] phy0 -> > rt2x00queue_write_tx_frame: Error - Arrived at non-free entry in the non-full > queue 2. > Oct 15 08:22:12 jupiter2 kernel: [ 5601.528262] Please file bug report to > http://rt2x00.serialmonkey.com. > Oct 15 08:22:12 jupiter2 kernel: [ 5601.528340] phy0 -> > rt2x00queue_write_tx_frame: Error - Arrived at non-free entry in the non-full > queue 2. > Oct 15 08:22:12 jupiter2 kernel: [ 5601.528341] Please file bug report to > http://rt2x00.serialmonkey.com. > > ****** At this point here, I sudo ifconfig wlan0 down. Then I sudo modprobe > -r rt73usb. Then I sudo modprobe rt73usb. Then I sudo ifconfig wlan0 up. Then > I reselect the proper network from the NetworkManager drop down, and then it > connects and I have internet again! **************** > > > Oct 15 08:28:48 jupiter2 avahi-daemon[5359]: Interface wlan0.IPv4 no longer > relevant for mDNS. > Oct 15 08:28:48 jupiter2 avahi-daemon[5359]: Leaving mDNS multicast group on > interface wlan0.IPv4 with address 192.168.0.100. > Oct 15 08:28:48 jupiter2 dhclient: receive_packet failed on wlan0: Network is > down > Oct 15 08:28:48 jupiter2 avahi-daemon[5359]: Withdrawing address record for > 192.168.0.100 on wlan0. > Oct 15 08:28:51 jupiter2 NetworkManager: <debug> [1224073731.029387] > periodic_update(): Roamed from BSSID 00:0F:3D:39:10:96 (LODGER) to (none) > ((none)) > Oct 15 08:28:55 jupiter2 kernel: [ 6003.929519] usbcore: deregistering > interface driver rt73usb > Oct 15 08:28:55 jupiter2 nm-system-settings: SCPlugin-Ifupdown: devices > removed (udi: /org/freedesktop/Hal/devices/net_00_16_44_7c_a0_e2_0) > Oct 15 08:28:55 jupiter2 NetworkManager: <info> (wlan0): now unmanaged > Oct 15 08:28:55 jupiter2 NetworkManager: <info> (wlan0): device state change: > 8 -> 1 > Oct 15 08:28:55 jupiter2 NetworkManager: <info> (wlan0): deactivating device. > Oct 15 08:28:55 jupiter2 NetworkManager: <info> wlan0: canceled DHCP > transaction, dhcp client pid 8501 > Oct 15 08:28:55 jupiter2 modprobe: WARNING: Not loading blacklisted module > rt73 > Oct 15 08:28:55 jupiter2 modprobe: WARNING: Not loading blacklisted module > rt73 > Oct 15 08:28:55 jupiter2 NetworkManager: > nm_system_device_flush_ip4_routes_with_iface: assertion `iface_idx >= 0' > failed > Oct 15 08:28:55 jupiter2 NetworkManager: > nm_system_device_flush_ip4_addresses_with_iface: assertion `iface_idx >= 0' > failed > Oct 15 08:28:55 jupiter2 modprobe: WARNING: Not loading blacklisted module > rt73 > Oct 15 08:28:55 jupiter2 last message repeated 2 times > Oct 15 08:28:55 jupiter2 NetworkManager: <info> (wlan0): cleaning up... > Oct 15 08:28:55 jupiter2 modprobe: WARNING: Not loading blacklisted module > rt73 > Oct 15 08:28:55 jupiter2 nm-dispatcher.action: Error in get_property: Method > "Get" with signature "ss" on interface "org.freedesktop.DBus.Properties" > doesn't exist > Oct 15 08:28:55 jupiter2 modprobe: WARNING: Not loading blacklisted module > rt73 > Oct 15 08:28:55 jupiter2 last message repeated 13 times > Oct 15 08:29:10 jupiter2 kernel: [ 6019.060139] phy0: Selected rate control > algorithm 'pid' > Oct 15 08:29:10 jupiter2 kernel: [ 6019.060438] Registered led device: > rt73usb-phy0:radio > Oct 15 08:29:10 jupiter2 kernel: [ 6019.060452] Registered led device: > rt73usb-phy0:assoc > Oct 15 08:29:10 jupiter2 kernel: [ 6019.060464] Registered led device: > rt73usb-phy0:quality > Oct 15 08:29:10 jupiter2 kernel: [ 6019.061014] usbcore: registered new > interface driver rt73usb > Oct 15 08:29:10 jupiter2 nm-system-settings: SCPlugin-Ifupdown: devices added > (udi: /org/freedesktop/Hal/devices/net_00_16_44_7c_a0_e2_0, iface: wlan0) > Oct 15 08:29:10 jupiter2 NetworkManager: <info> wlan0: driver is 'rt73usb'. > Oct 15 08:29:10 jupiter2 NetworkManager: <info> wlan0: driver supports SSID > scans (scan_capa 0x01). > Oct 15 08:29:10 jupiter2 NetworkManager: <info> Found new 802.11 WiFi device > 'wlan0'. > Oct 15 08:29:10 jupiter2 NetworkManager: <info> (wlan0): exported as > /org/freedesktop/Hal/devices/net_00_16_44_7c_a0_e2_0 > Oct 15 08:29:13 jupiter2 kernel: [ 6022.272165] firmware: requesting rt73.bin > Oct 15 08:29:14 jupiter2 NetworkManager: <info> (wlan0): device state change: > 1 -> 2 > Oct 15 08:29:14 jupiter2 NetworkManager: <info> (wlan0): preparing device. > Oct 15 08:29:14 jupiter2 NetworkManager: <info> (wlan0): deactivating device. > Oct 15 08:29:14 jupiter2 NetworkManager: <info> (wlan0): device state change: > 2 -> 3 > Oct 15 08:29:14 jupiter2 NetworkManager: <info> (wlan0): supplicant interface > state change: 1 -> 2. > Oct 15 08:29:14 jupiter2 NetworkManager: <info> Activation (wlan0) starting > connection 'Auto LODGER' > Oct 15 08:29:14 jupiter2 NetworkManager: <info> (wlan0): device state change: > 3 -> 4 > Oct 15 08:29:14 jupiter2 NetworkManager: <info> Activation (wlan0) Stage 1 of > 5 (Device Prepare) scheduled... > Oct 15 08:29:14 jupiter2 NetworkManager: <info> Activation (wlan0) Stage 1 of > 5 (Device Prepare) started... > Oct 15 08:29:14 jupiter2 NetworkManager: <info> Activation (wlan0) Stage 2 of > 5 (Device Configure) scheduled... > Oct 15 08:29:14 jupiter2 NetworkManager: <info> Activation (wlan0) Stage 1 of > 5 (Device Prepare) complete. > Oct 15 08:29:14 jupiter2 NetworkManager: <info> Activation (wlan0) Stage 2 of > 5 (Device Configure) starting... > Oct 15 08:29:14 jupiter2 NetworkManager: <info> (wlan0): device state change: > 4 -> 5 > Oct 15 08:29:14 jupiter2 NetworkManager: <info> Activation (wlan0/wireless): > access point 'Auto LODGER' has security, but secrets are required. > Oct 15 08:29:14 jupiter2 NetworkManager: <info> (wlan0): device state change: > 5 -> 6 > Oct 15 08:29:14 jupiter2 NetworkManager: <info> Activation (wlan0) Stage 2 of > 5 (Device Configure) complete. > Oct 15 08:29:15 jupiter2 kernel: [ 6023.884609] wlan0: authenticate with AP > 00:16:b6:2e:13:f8 > Oct 15 08:29:15 jupiter2 kernel: [ 6023.886242] wlan0: authenticated > Oct 15 08:29:15 jupiter2 kernel: [ 6023.886247] wlan0: associate with AP > 00:16:b6:2e:13:f8 > Oct 15 08:29:15 jupiter2 kernel: [ 6023.888496] wlan0: RX AssocResp from > 00:16:b6:2e:13:f8 (capab=0x401 status=0 aid=4) > Oct 15 08:29:15 jupiter2 kernel: [ 6023.888501] wlan0: associated > Oct 15 08:29:15 jupiter2 kernel: [ 6023.889065] wlan0: disassociating by > local choice (reason=3) > Oct 15 08:29:15 jupiter2 NetworkManager: <info> (wlan0): supplicant > connection state change: 1 -> 4 > Oct 15 08:29:15 jupiter2 NetworkManager: <info> (wlan0): supplicant > connection state change: 4 -> 0 > Oct 15 08:29:15 jupiter2 NetworkManager: <info> Activation (wlan0) Stage 1 of > 5 (Device Prepare) scheduled... > Oct 15 08:29:15 jupiter2 NetworkManager: <info> Activation (wlan0) Stage 1 of > 5 (Device Prepare) started... > Oct 15 08:29:15 jupiter2 NetworkManager: <info> (wlan0): device state change: > 6 -> 4 > Oct 15 08:29:15 jupiter2 NetworkManager: <info> Activation (wlan0) Stage 2 of > 5 (Device Configure) scheduled... > Oct 15 08:29:15 jupiter2 NetworkManager: <info> Activation (wlan0) Stage 1 of > 5 (Device Prepare) complete. > Oct 15 08:29:15 jupiter2 NetworkManager: <info> Activation (wlan0) Stage 2 of > 5 (Device Configure) starting... > Oct 15 08:29:15 jupiter2 NetworkManager: <info> (wlan0): device state change: > 4 -> 5 > Oct 15 08:29:15 jupiter2 NetworkManager: <info> Activation (wlan0/wireless): > connection 'Auto LODGER' has security, and secrets exist. No new secrets > needed. > Oct 15 08:29:15 jupiter2 NetworkManager: <info> Config: added 'ssid' value > 'LODGER' > Oct 15 08:29:15 jupiter2 NetworkManager: <info> Config: added 'scan_ssid' > value '1' > Oct 15 08:29:15 jupiter2 NetworkManager: <info> Config: added 'bssid' value > '00:0f:3d:39:10:96' > Oct 15 08:29:15 jupiter2 NetworkManager: <info> Config: added 'key_mgmt' > value 'NONE' > Oct 15 08:29:15 jupiter2 NetworkManager: <info> Config: added 'auth_alg' > value 'SHARED' > Oct 15 08:29:15 jupiter2 NetworkManager: <info> Config: added 'wep_key0' > value '<omitted>' > Oct 15 08:29:15 jupiter2 NetworkManager: <info> Config: added 'wep_tx_keyidx' > value '0' > Oct 15 08:29:15 jupiter2 NetworkManager: <info> Activation (wlan0) Stage 2 of > 5 (Device Configure) complete. > Oct 15 08:29:15 jupiter2 NetworkManager: <info> Config: set interface ap_scan > to 1 > Oct 15 08:29:19 jupiter2 NetworkManager: <info> (wlan0): supplicant > connection state change: 0 -> 2 > Oct 15 08:29:20 jupiter2 NetworkManager: <info> (wlan0): supplicant > connection state change: 2 -> 3 > Oct 15 08:29:21 jupiter2 kernel: [ 6030.477636] wlan0: authenticate with AP > 00:0f:3d:39:10:96 > Oct 15 08:29:21 jupiter2 kernel: [ 6030.484519] wlan0: authenticated > Oct 15 08:29:21 jupiter2 kernel: [ 6030.484523] wlan0: associate with AP > 00:0f:3d:39:10:96 > Oct 15 08:29:21 jupiter2 kernel: [ 6030.486778] wlan0: RX AssocResp from > 00:0f:3d:39:10:96 (capab=0x431 status=0 aid=1) > Oct 15 08:29:21 jupiter2 kernel: [ 6030.486782] wlan0: associated > Oct 15 08:29:21 jupiter2 NetworkManager: <info> (wlan0): supplicant > connection state change: 3 -> 4 > Oct 15 08:29:21 jupiter2 NetworkManager: <info> (wlan0): supplicant > connection state change: 4 -> 7 > Oct 15 08:29:21 jupiter2 NetworkManager: <info> Activation (wlan0/wireless) > Stage 2 of 5 (Device Configure) successful. Connected to wireless network > 'LODGER'. > Oct 15 08:29:21 jupiter2 NetworkManager: <info> Activation (wlan0) Stage 3 of > 5 (IP Configure Start) scheduled. > Oct 15 08:29:21 jupiter2 NetworkManager: <info> Activation (wlan0) Stage 3 of > 5 (IP Configure Start) started... > Oct 15 08:29:21 jupiter2 NetworkManager: <info> (wlan0): device state change: > 5 -> 7 > Oct 15 08:29:21 jupiter2 NetworkManager: <info> Activation (wlan0) Beginning > DHCP transaction. > Oct 15 08:29:21 jupiter2 NetworkManager: <info> dhclient started with pid > 10598 > Oct 15 08:29:21 jupiter2 NetworkManager: <info> Activation (wlan0) Stage 3 of > 5 (IP Configure Start) complete. > Oct 15 08:29:21 jupiter2 dhclient: Internet Systems Consortium DHCP Client > V3.1.1 > Oct 15 08:29:21 jupiter2 dhclient: Copyright 2004-2008 Internet Systems > Consortium. > Oct 15 08:29:21 jupiter2 dhclient: All rights reserved. > Oct 15 08:29:21 jupiter2 dhclient: For info, please visit > http://www.isc.org/sw/dhcp/ > Oct 15 08:29:21 jupiter2 dhclient: > Oct 15 08:29:21 jupiter2 dhclient: wmaster0: unknown hardware address type 801 > Oct 15 08:29:21 jupiter2 NetworkManager: <info> DHCP: device wlan0 state > changed normal exit -> preinit > Oct 15 08:29:21 jupiter2 dhclient: wmaster0: unknown hardware address type 801 > Oct 15 08:29:21 jupiter2 dhclient: Listening on LPF/wlan0/00:16:44:7c:a0:e2 > Oct 15 08:29:21 jupiter2 dhclient: Sending on LPF/wlan0/00:16:44:7c:a0:e2 > Oct 15 08:29:21 jupiter2 dhclient: Sending on Socket/fallback > Oct 15 08:29:21 jupiter2 dhclient: DHCPDISCOVER on wlan0 to 255.255.255.255 > port 67 interval 5 > Oct 15 08:29:21 jupiter2 dhclient: DHCPOFFER of 192.168.0.100 from 192.168.0.1 > Oct 15 08:29:21 jupiter2 dhclient: DHCPREQUEST of 192.168.0.100 on wlan0 to > 255.255.255.255 port 67 > Oct 15 08:29:21 jupiter2 dhclient: DHCPACK of 192.168.0.100 from 192.168.0.1 > Oct 15 08:29:21 jupiter2 NetworkManager: <info> DHCP: device wlan0 state > changed preinit -> bound > Oct 15 08:29:21 jupiter2 NetworkManager: <info> Activation (wlan0) Stage 4 of > 5 (IP Configure Get) scheduled... > Oct 15 08:29:21 jupiter2 NetworkManager: <info> Activation (wlan0) Stage 4 of > 5 (IP Configure Get) started... > Oct 15 08:29:21 jupiter2 NetworkManager: <info> address 192.168.0.100 > Oct 15 08:29:21 jupiter2 NetworkManager: <info> prefix 24 (255.255.255.0) > Oct 15 08:29:21 jupiter2 NetworkManager: <info> gateway 192.168.0.1 > Oct 15 08:29:21 jupiter2 NetworkManager: <info> nameserver '192.168.0.1' > Oct 15 08:29:21 jupiter2 NetworkManager: <info> Activation (wlan0) Stage 5 of > 5 (IP Configure Commit) scheduled... > Oct 15 08:29:21 jupiter2 NetworkManager: <info> Activation (wlan0) Stage 4 of > 5 (IP Configure Get) complete. > Oct 15 08:29:21 jupiter2 NetworkManager: <info> Activation (wlan0) Stage 5 of > 5 (IP Configure Commit) started... > Oct 15 08:29:21 jupiter2 avahi-daemon[5359]: Joining mDNS multicast group on > interface wlan0.IPv4 with address 192.168.0.100. > Oct 15 08:29:21 jupiter2 dhclient: bound to 192.168.0.100 -- renewal in > 290345 seconds. > Oct 15 08:29:21 jupiter2 avahi-daemon[5359]: New relevant interface > wlan0.IPv4 for mDNS. > Oct 15 08:29:21 jupiter2 avahi-daemon[5359]: Registering new address record > for 192.168.0.100 on wlan0.IPv4. > Oct 15 08:29:22 jupiter2 NetworkManager: <info> (wlan0): device state change: > 7 -> 8 > Oct 15 08:29:22 jupiter2 NetworkManager: <info> Policy set (wlan0) as default > device for routing and DNS. > Oct 15 08:29:22 jupiter2 NetworkManager: <info> Activation (wlan0) > successful, device activated. > Oct 15 08:29:22 jupiter2 NetworkManager: <info> Activation (wlan0) Stage 5 of > 5 (IP Configure Commit) complete. > Oct 15 08:29:22 jupiter2 ntpd[8629]: ntpd exiting on signal 15 > Oct 15 08:29:23 jupiter2 ntpdate[10687]: adjust time server 91.189.94.4 > offset -0.006663 sec > Oct 15 08:29:23 jupiter2 ntpd[10721]: ntpd [EMAIL PROTECTED] Wed Aug 20 > 17:03:52 UTC 2008 (1) > Oct 15 08:29:23 jupiter2 ntpd[10722]: precision = 1.000 usec > > What do you all think? Does this shed more late anywhere!!??? >
-- rt73usb intrepid 8.10 beta -- wireless connection periodically lost; must restart driver https://bugs.launchpad.net/bugs/283759 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
