I am seeing this too, on an ASUS EeePC 901. The relevant excerpt from dmesg output is:
[11127.048879] sd 1:0:1:0: [sdb] Starting disk [11127.160088] usb 5-5: reset high speed USB device using ehci_hcd and address 2 [11127.404086] usb 5-8: reset high speed USB device using ehci_hcd and address 4 [11128.205066] uvcvideo 5-8:1.0: no reset_resume for driver uvcvideo? [11128.205078] uvcvideo 5-8:1.1: no reset_resume for driver uvcvideo? [11128.316087] usb 4-1: reset full speed USB device using uhci_hcd and address 2 [11129.112128] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [11129.112146] pci 0000:00:02.0: setting latency timer to 64 [11129.266506] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (05e3:0505) [11129.588299] PM: resume devices took 3.452 seconds [11129.588349] PM: Finishing wakeup. [11129.588353] Restarting tasks ... done. [11131.038119] ATL1E 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [11131.038167] ATL1E 0000:04:00.0: setting latency timer to 64 [11131.666280] Xorg[7734]: segfault at 5f444441 ip b79f6d64 sp bfe15030 error 4 in libdri.so[b79f3000+8000] [11132.848626] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input18 [11132.897308] ACPI: Power Button (FF) [PWRF] [11132.897588] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input19 [11132.936969] ACPI: Lid Switch [LID] Also attached is the X.org log. ** Attachment added: "Xorg.0.log.old" http://launchpadlibrarian.net/19328419/Xorg.0.log.old -- X keeps crashing after resuming from suspend/hibernate [945GM] https://bugs.launchpad.net/bugs/270670 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
