Public bug reported: Just upgraded from Hardy to Intrepid, running with linux- image-2.6.27-7-generic 2.6.27-7.14, plugging in a Philips GoGear USB MP3 stick doesn't mount it (and has no effect on the desktop, an error message might be nice...)
It used to work fine with Hardy (admittedly haven't tried in a couple of months) and mounts with no problems on a Mac. dmesg reports the following: [ 3853.400035] usb 1-5: reset high speed USB device using ehci_hcd and address 3 [ 3853.812310] usb 1-5.2: new high speed USB device using ehci_hcd and address 11 [ 3853.937165] usb 1-5.2: configuration #1 chosen from 1 choice [ 3853.960398] scsi11 : SCSI emulation for USB Mass Storage devices [ 3853.961611] usb-storage: device found at 11 [ 3853.961619] usb-storage: waiting for device to settle before scanning [ 3855.934779] usb 1-5.2: USB disconnect, address 11 [ 3858.464042] usb 1-5: reset high speed USB device using ehci_hcd and address 3 [ 3858.876378] usb 1-5.2: new high speed USB device using ehci_hcd and address 12 [ 3859.002191] usb 1-5.2: configuration #1 chosen from 1 choice [ 3859.032920] scsi12 : SCSI emulation for USB Mass Storage devices [ 3859.037775] usb-storage: device found at 12 [ 3859.037784] usb-storage: waiting for device to settle before scanning [ 3861.054450] usb 1-5.2: USB disconnect, address 12 [ 3863.532057] usb 1-5: reset high speed USB device using ehci_hcd and address 3 [ 3863.944425] usb 1-5.2: new high speed USB device using ehci_hcd and address 13 [ 3864.070226] usb 1-5.2: configuration #1 chosen from 1 choice [ 3864.099302] scsi13 : SCSI emulation for USB Mass Storage devices [ 3864.105693] usb-storage: device found at 13 [ 3864.105703] usb-storage: waiting for device to settle before scanning [ 3869.104281] usb-storage: device scan complete [ 3869.106846] scsi 13:0:0:0: Direct-Access Philips GoGear Audio 0100 PQ: 0 ANSI: 4 [ 3869.129387] sd 13:0:0:0: [sdc] 502272 2048-byte hardware sectors (1029 MB) [ 3869.181347] sd 13:0:0:0: [sdc] Write Protect is off [ 3869.181361] sd 13:0:0:0: [sdc] Mode Sense: 3e 00 00 00 [ 3869.181365] sd 13:0:0:0: [sdc] Assuming drive cache: write through [ 3869.191471] sd 13:0:0:0: [sdc] 502272 2048-byte hardware sectors (1029 MB) [ 3869.197774] sd 13:0:0:0: [sdc] Write Protect is off [ 3869.197788] sd 13:0:0:0: [sdc] Mode Sense: 3e 00 00 00 [ 3869.197821] sd 13:0:0:0: [sdc] Assuming drive cache: write through [ 3869.199082] sdc: sdc1 [ 3869.201084] sd 13:0:0:0: [sdc] Attached SCSI removable disk [ 3869.201659] sd 13:0:0:0: Attached scsi generic sg3 type 0 [ 3869.485110] sd 13:0:0:0: [sdc] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK [ 3869.485127] end_request: I/O error, dev sdc, sector 40 [ 3869.485136] Buffer I/O error on device sdc, logical block 5 [ 3869.485141] Buffer I/O error on device sdc, logical block 6 [ 3869.485146] Buffer I/O error on device sdc, logical block 7 [ 3869.485150] Buffer I/O error on device sdc, logical block 8 [ 3869.485154] Buffer I/O error on device sdc, logical block 9 [ 3869.485158] Buffer I/O error on device sdc, logical block 10 [ 3869.485162] Buffer I/O error on device sdc, logical block 11 [ 3869.487869] sd 13:0:0:0: [sdc] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK [ 3869.487878] end_request: I/O error, dev sdc, sector 2009080 [ 3869.487883] Buffer I/O error on device sdc, logical block 251135 [ 3869.488960] sd 13:0:0:0: [sdc] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK [ 3869.488969] end_request: I/O error, dev sdc, sector 2009080 [ 3869.488974] Buffer I/O error on device sdc, logical block 251135 [ 3869.491155] usb 1-5.2: USB disconnect, address 13 [ 3869.496050] scsi 13:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK [ 3869.496064] end_request: I/O error, dev sdc, sector 2009080 [ 3869.496074] Buffer I/O error on device sdc, logical block 251135 [ 3869.497081] scsi 13:0:0:0: rejecting I/O to dead device [ 3872.164046] usb 1-5: reset high speed USB device using ehci_hcd and address 3 [ 3872.576343] usb 1-5.2: new high speed USB device using ehci_hcd and address 14 [ 3872.706356] usb 1-5.2: configuration #1 chosen from 1 choice [ 3872.745111] scsi14 : SCSI emulation for USB Mass Storage devices [ 3872.756122] usb-storage: device found at 14 [ 3872.756134] usb-storage: waiting for device to settle before scanning [ 3877.756312] usb-storage: device scan complete [ 3877.758946] scsi 14:0:0:0: Direct-Access Philips GoGear Audio 0100 PQ: 0 ANSI: 4 [ 3877.776274] sd 14:0:0:0: [sdc] 502272 2048-byte hardware sectors (1029 MB) [ 3877.777265] sd 14:0:0:0: [sdc] Write Protect is off [ 3877.777273] sd 14:0:0:0: [sdc] Mode Sense: 3e 00 00 00 [ 3877.777277] sd 14:0:0:0: [sdc] Assuming drive cache: write through [ 3877.779388] sd 14:0:0:0: [sdc] 502272 2048-byte hardware sectors (1029 MB) [ 3877.780264] sd 14:0:0:0: [sdc] Write Protect is off [ 3877.780272] sd 14:0:0:0: [sdc] Mode Sense: 3e 00 00 00 [ 3877.780275] sd 14:0:0:0: [sdc] Assuming drive cache: write through [ 3877.780928] sdc: sdc1 [ 3877.782877] sd 14:0:0:0: [sdc] Attached SCSI removable disk [ 3877.783401] sd 14:0:0:0: Attached scsi generic sg3 type 0 [ 3878.033577] sd 14:0:0:0: [sdc] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK [ 3878.033593] end_request: I/O error, dev sdc, sector 40 [ 3878.033601] __ratelimit: 18 callbacks suppressed [ 3878.033606] Buffer I/O error on device sdc, logical block 5 [ 3878.033612] Buffer I/O error on device sdc, logical block 6 [ 3878.033616] Buffer I/O error on device sdc, logical block 7 [ 3878.033620] Buffer I/O error on device sdc, logical block 8 [ 3878.033625] Buffer I/O error on device sdc, logical block 9 [ 3878.033629] Buffer I/O error on device sdc, logical block 10 [ 3878.033633] Buffer I/O error on device sdc, logical block 11 [ 3878.036479] sd 14:0:0:0: [sdc] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK [ 3878.036488] end_request: I/O error, dev sdc, sector 2009080 [ 3878.036493] Buffer I/O error on device sdc, logical block 251135 [ 3878.037631] sd 14:0:0:0: [sdc] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK [ 3878.037640] end_request: I/O error, dev sdc, sector 2009080 [ 3878.037645] Buffer I/O error on device sdc, logical block 251135 [ 3878.041029] usb 1-5.2: USB disconnect, address 14 [ 3878.046341] scsi 14:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK [ 3878.046364] end_request: I/O error, dev sdc, sector 2009080 [ 3878.046373] Buffer I/O error on device sdc, logical block 251135 [ 3878.047186] scsi 14:0:0:0: rejecting I/O to dead device lspci reports the following information about the USB controller: 00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) 00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) 00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) 00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) 00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86) ** Affects: linux (Ubuntu) Importance: Undecided Status: New -- Intrepid refuses to mount an USB drive with "Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK" https://bugs.launchpad.net/bugs/289457 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs