Same problem is here for the Cowon iAUDIO 6. This is also a USB disk
device to play mp3/ogg etc.
Jul 3 04:34:46 flamingo kernel: [17179683.720000] usb 3-8: new high speed USB
device using ehci_hcd and address 4
Jul 3 04:34:46 flamingo kernel: [17179683.968000] usb 3-8: new high speed USB
device using ehci_hcd and address 5
Jul 3 04:34:46 flamingo kernel: [17179684.324000] scsi4 : SCSI emulation for
USB Mass Storage devices
Jul 3 04:34:51 flamingo kernel: [17179689.360000] Vendor: COWON Model:
iAUDIO 6 Rev: 0100
Jul 3 04:34:51 flamingo kernel: [17179689.360000] Type: Direct-Access
ANSI SCSI revision: 00
Jul 3 04:34:51 flamingo kernel: [17179689.360000] SCSI device sda: 7855648
512-byte hdwr sectors (4022 MB)
Jul 3 04:34:51 flamingo kernel: [17179689.360000] sda: Write Protect is off
Jul 3 04:34:51 flamingo kernel: [17179689.364000] SCSI device sda: 7855648
512-byte hdwr sectors (4022 MB)
Jul 3 04:34:51 flamingo kernel: [17179689.364000] sda: Write Protect is off
Jul 3 04:34:51 flamingo kernel: [17179689.364000] sda:<6>usb 3-8: reset high
speed USB device using ehci_hcd and address 5
Jul 3 04:34:52 flamingo kernel: [17179689.880000] usb 3-8: reset high speed
USB device using ehci_hcd and address 5
Jul 3 04:34:52 flamingo kernel: [17179690.300000] usb 3-8: reset high speed
USB device using ehci_hcd and address 5
Jul 3 04:34:53 flamingo kernel: [17179690.664000] usb 3-8: reset high speed
USB device using ehci_hcd and address 5
Jul 3 04:34:53 flamingo kernel: [17179691.032000] usb 3-8: reset high speed
USB device using ehci_hcd and address 5
Jul 3 04:34:53 flamingo kernel: [17179691.288000] sd 4:0:0:0: SCSI error:
return code = 0x70000
Jul 3 04:34:53 flamingo kernel: [17179691.288000] end_request: I/O error, dev
sda, sector 0
Jul 3 04:34:53 flamingo kernel: [17179691.296000] unable to read partition
table
Jul 3 04:34:53 flamingo kernel: [17179691.296000] sd 4:0:0:0: Attached scsi
removable disk sda
Jul 3 04:34:53 flamingo kernel: [17179691.296000] sd 4:0:0:0: Attached scsi
generic sg0 type 0
Jul 3 04:34:53 flamingo kernel: [17179691.548000] usb 3-8: reset high speed
USB device using ehci_hcd and address 5
Jul 3 04:34:54 flamingo kernel: [17179691.916000] usb 3-8: reset high speed
USB device using ehci_hcd and address 5
Jul 3 04:34:54 flamingo kernel: [17179692.280000] usb 3-8: reset high speed
USB device using ehci_hcd and address 5
Jul 3 04:34:55 flamingo kernel: [17179692.648000] usb 3-8: reset high speed
USB device using ehci_hcd and address 5
Jul 3 04:34:55 flamingo kernel: [17179693.016000] usb 3-8: reset high speed
USB device using ehci_hcd and address 5
Jul 3 04:34:55 flamingo kernel: [17179693.272000] sd 4:0:0:0: SCSI error:
return code = 0x70000
Jul 3 04:34:55 flamingo kernel: [17179693.272000] end_request: I/O error, dev
sda, sector 64
Jul 3 04:34:55 flamingo kernel: [17179693.384000] usb 3-8: reset high speed
USB device using ehci_hcd and address 5
Jul 3 04:34:56 flamingo kernel: [17179693.752000] usb 3-8: reset high speed
USB device using ehci_hcd and address 5
Jul 3 04:34:56 flamingo kernel: [17179694.116000] usb 3-8: reset high speed
USB device using ehci_hcd and address 5
Jul 3 04:34:56 flamingo kernel: [17179694.484000] usb 3-8: reset high speed
USB device using ehci_hcd and address 5
Jul 3 04:34:57 flamingo kernel: [17179694.852000] usb 3-8: reset high speed
USB device using ehci_hcd and address 5
Jul 3 04:34:57 flamingo kernel: [17179695.108000] sd 4:0:0:0: SCSI error:
return code = 0x70000
Jul 3 04:34:57 flamingo kernel: [17179695.108000] end_request: I/O error, dev
sda, sector 72
Jul 3 04:34:57 flamingo kernel: [17179695.220000] usb 3-8: reset high speed
USB device using ehci_hcd and address 5
Jul 3 04:34:57 flamingo kernel: [17179695.588000] usb 3-8: reset high speed
USB device using ehci_hcd and address 5
Jul 3 04:34:58 flamingo kernel: [17179695.952000] usb 3-8: reset high speed
USB device using ehci_hcd and address 5
Jul 3 04:34:58 flamingo kernel: [17179696.320000] usb 3-8: reset high speed
USB device using ehci_hcd and address 5
Jul 3 04:34:59 flamingo kernel: [17179696.688000] usb 3-8: reset high speed
USB device using ehci_hcd and address 5
Jul 3 04:34:59 flamingo kernel: [17179696.940000] sd 4:0:0:0: SCSI error:
return code = 0x70000
Jul 3 04:34:59 flamingo kernel: [17179696.940000] end_request: I/O error, dev
sda, sector 80
Jul 3 04:34:59 flamingo kernel: [17179697.056000] usb 3-8: reset high speed
USB device using ehci_hcd and address 5
Jul 3 04:34:59 flamingo kernel: [17179697.420000] usb 3-8: reset high speed
USB device using ehci_hcd and address 5
Jul 3 04:35:00 flamingo kernel: [17179697.788000] usb 3-8: reset high speed
USB device using ehci_hcd and address 5
Jul 3 04:35:00 flamingo kernel: [17179698.156000] usb 3-8: reset high speed
USB device using ehci_hcd and address 5
:
Jul 3 04:35:00 flamingo kernel: [17179698.524000] usb 3-8: reset high speed
USB device using ehci_hcd and address 5
Jul 3 04:35:01 flamingo kernel: [17179698.776000] sd 4:0:0:0: SCSI error:
return code = 0x70000
Jul 3 04:35:01 flamingo kernel: [17179698.776000] end_request: I/O error, dev
sda, sector 88
Jul 3 04:35:01 flamingo kernel: [17179698.892000] usb 3-8: reset high speed
USB device using ehci_hcd and address 5
Jul 3 04:35:01 flamingo kernel: [17179699.256000] usb 3-8: reset high speed
USB device using ehci_hcd and address 5
Jul 3 04:35:01 flamingo kernel: [17179699.624000] usb 3-8: reset high speed
USB device using ehci_hcd and address 5
Jul 3 04:35:02 flamingo kernel: [17179699.992000] usb 3-8: reset high speed
USB device using ehci_hcd and address 5
Jul 3 04:35:02 flamingo kernel: [17179700.360000] usb 3-8: reset high speed
USB device using ehci_hcd and address 5
Jul 3 04:35:02 flamingo kernel: [17179700.612000] sd 4:0:0:0: SCSI error:
return code = 0x70000
Jul 3 04:35:02 flamingo kernel: [17179700.612000] end_request: I/O error, dev
sda, sector 96
Jul 3 04:35:03 flamingo kernel: [17179700.724000] usb 3-8: reset high speed
USB device using ehci_hcd and address 5
Jul 3 04:35:03 flamingo kernel: [17179701.092000] usb 3-8: reset high speed
USB device using ehci_hcd and address 5
Jul 3 04:35:02 flamingo kernel: [17179701.460000] usb 3-8: reset high speed
USB device using ehci_hcd and address 5
Jul 3 04:35:02 flamingo kernel: [17179701.828000] usb 3-8: reset high speed
USB device using ehci_hcd and address 5
Jul 3 04:35:03 flamingo kernel: [17179702.196000] usb 3-8: reset high speed
USB device using ehci_hcd and address 5
Jul 3 04:35:03 flamingo kernel: [17179702.448000] sd 4:0:0:0: SCSI error:
return code = 0x70000
Jul 3 04:35:03 flamingo kernel: [17179702.448000] end_request: I/O error, dev
sda, sector 104
Jul 3 04:35:03 flamingo kernel: [17179702.560000] usb 3-8: reset high speed
USB device using ehci_hcd and address 5
Jul 3 04:35:03 flamingo kernel: [17179702.928000] usb 3-8: reset high speed
USB device using ehci_hcd and address 5
Jul 3 04:35:04 flamingo kernel: [17179703.296000] usb 3-8: reset high speed
USB device using ehci_hcd and address 5
Jul 3 04:35:04 flamingo kernel: [17179703.664000] usb 3-8: reset high speed
USB device using ehci_hcd and address 5
Jul 3 04:35:04 flamingo kernel: [17179703.872000] tun: Universal TUN/TAP
device driver, 1.6
Jul 3 04:35:04 flamingo kernel: [17179703.872000] tun: (C) 1999-2004 Max
Krasnyansky <[EMAIL PROTECTED]>
Jul 3 04:35:04 flamingo kernel: [17179704.028000] usb 3-8: reset high speed
USB device using ehci_hcd and address 5
Jul 3 04:35:05 flamingo kernel: [17179704.284000] sd 4:0:0:0: SCSI error:
return code = 0x70000
Jul 3 04:35:05 flamingo kernel: [17179704.284000] end_request: I/O error, dev
sda, sector 112
Jul 3 04:35:05 flamingo kernel: [17179704.396000] usb 3-8: reset high speed
USB device using ehci_hcd and address 5
Jul 3 04:35:05 flamingo kernel: [17179704.764000] usb 3-8: reset high speed
USB device using ehci_hcd and address 5
Jul 3 04:35:06 flamingo kernel: [17179705.132000] usb 3-8: reset high speed
USB device using ehci_hcd and address 5
Jul 3 04:35:06 flamingo kernel: [17179705.500000] usb 3-8: reset high speed
USB device using ehci_hcd and address 5
Jul 3 04:35:06 flamingo kernel: [17179705.864000] usb 3-8: reset high speed
USB device using ehci_hcd and address 5
Jul 3 04:35:07 flamingo kernel: [17179706.120000] sd 4:0:0:0: SCSI error:
return code = 0x70000
Jul 3 04:35:07 flamingo kernel: [17179706.120000] end_request: I/O error, dev
sda, sector 120
Jul 3 04:35:07 flamingo kernel: [17179706.232000] usb 3-8: reset high speed
USB device using ehci_hcd and address 5
Jul 3 04:35:07 flamingo kernel: [17179706.600000] usb 3-8: reset high speed
USB device using ehci_hcd and address 5
Jul 3 04:35:07 flamingo kernel: [17179706.968000] usb 3-8: reset high speed
USB device using ehci_hcd and address 5
Jul 3 04:35:08 flamingo kernel: [17179707.332000] usb 3-8: reset high speed
USB device using ehci_hcd and address 5
Jul 3 04:35:08 flamingo kernel: [17179707.700000] usb 3-8: reset high speed
USB device using ehci_hcd and address 5
Jul 3 04:35:08 flamingo kernel: [17179707.956000] sd 4:0:0:0: SCSI error:
return code = 0x70000
Jul 3 04:35:08 flamingo kernel: [17179707.956000] end_request: I/O error, dev
sda, sector 128
Jul 3 04:35:08 flamingo kernel: [17179708.068000] usb 3-8: reset high speed
USB device using ehci_hcd and address 5
Jul 3 04:35:09 flamingo kernel: [17179708.436000] usb 3-8: reset high speed
USB device using ehci_hcd and address 5
Jul 3 04:35:09 flamingo kernel: [17179708.804000] usb 3-8: reset high speed
USB device using ehci_hcd and address 5
Jul 3 04:35:10 flamingo kernel: [17179709.168000] usb 3-8: reset high speed
USB device using ehci_hcd and address 5
Jul 3 04:35:10 flamingo kernel: [17179709.536000] usb 3-8: reset high speed
USB device using ehci_hcd and address 5
Jul 3 04:35:10 flamingo kernel: [17179709.792000] sd 4:0:0:0: SCSI error:
return code = 0x70000
Jul 3 04:35:10 flamingo kernel: [17179709.792000] end_request: I/O error, dev
sda, sector 136
Jul 3 04:35:10 flamingo kernel: [17179709.904000] usb 3-8: reset high speed
USB device using ehci_hcd and address 5
Jul 3 04:35:11 flamingo kernel: [17179710.272000] usb 3-8: reset high speed
USB device using ehci_hcd and address 5
Jul 3 04:35:11 flamingo kernel: [17179710.640000] usb 3-8: reset high speed
USB device using ehci_hcd and address 5
Jul 3 04:35:11 flamingo kernel: [17179711.004000] usb 3-8: reset high speed
USB device using ehci_hcd and address 5
Jul 3 04:35:12 flamingo kernel: [17179711.372000] usb 3-8: reset high speed
USB device using ehci_hcd and address 5
Jul 3 04:35:12 flamingo kernel: [17179711.628000] sd 4:0:0:0: SCSI error:
return code = 0x70000
:
--
Ipods react badly to checks for EFI partition tables
https://launchpad.net/bugs/37163
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
