Fix coldfire serial driver bindings no more relocated to ram after last
changes to drivers/serial/serial.c (regression).
Serial initialization in ram has to be called after that gd->reloc_off is
calculated.
Signed-off-by: Angelo Dureghello <sysa...@gmail.com>
Cc: Jason Jin <jason....@freescale.com>
---
diff --git a/arch/m68k/lib/board.c b/arch/m68k/lib/board.c
index 02d73fd..373570c 100644
--- a/arch/m68k/lib/board.c
+++ b/arch/m68k/lib/board.c
@@ -402,14 +402,14 @@ void board_init_r (gd_t *id, ulong dest_addr)
gd->flags |= GD_FLG_RELOC; /* tell others: relocation done */
- serial_initialize();
-
debug ("Now running in RAM - U-Boot at: %08lx\n", dest_addr);
WATCHDOG_RESET ();
gd->reloc_off = dest_addr - CONFIG_SYS_MONITOR_BASE;
+ serial_initialize();
+
monitor_flash_len = (ulong)&__init_end - dest_addr;
#if defined(CONFIG_NEEDS_MANUAL_RELOC)
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
