As to more features are added into the u-boot, which cause the u-boot
size larger than 0x40000 (256KiB), so increase the size for u-boot
through move offset of the u-boot environment. Or else, when execute
saveenv command, which will erase the end of the u-boot causing it can
not boot up again.

Also, the linux kernel image is bigger than 2MiB, so change the bootcmd
as the same time.

Signed-off-by: Bo Shen <voice.s...@atmel.com>
---
Change since v1:
  change the bootargs as to the size of mainline linux kernel image size
---
 include/configs/at91sam9260ek.h    |   17 ++++++++---------
 include/configs/at91sam9261ek.h    |   17 ++++++++---------
 include/configs/at91sam9263ek.h    |   15 ++++++++-------
 include/configs/at91sam9m10g45ek.h |   15 +++++++--------
 4 files changed, 31 insertions(+), 33 deletions(-)

diff --git a/include/configs/at91sam9260ek.h b/include/configs/at91sam9260ek.h
index f921fac..905d5c5 100644
--- a/include/configs/at91sam9260ek.h
+++ b/include/configs/at91sam9260ek.h
@@ -210,16 +210,15 @@
 
 /* bootstrap + u-boot + env + linux in nandflash */
 #define CONFIG_ENV_IS_IN_NAND  1
-#define CONFIG_ENV_OFFSET              0x60000
-#define CONFIG_ENV_OFFSET_REDUND       0x80000
+#define CONFIG_ENV_OFFSET              0xc0000
+#define CONFIG_ENV_OFFSET_REDUND       0x100000
 #define CONFIG_ENV_SIZE                0x20000         /* 1 sector = 128 kB */
-#define CONFIG_BOOTCOMMAND     "nand read 0x22000000 0xA0000 0x200000; bootm"
-#define CONFIG_BOOTARGS                "console=ttyS0,115200 "                 
\
-                               "root=/dev/mtdblock5 "                  \
-                               "mtdparts=atmel_nand:128k(bootstrap)ro,"        
\
-                               "256k(uboot)ro,128k(env1)ro,"           \
-                               "128k(env2)ro,2M(linux),-(root) "       \
-                               "rw rootfstype=jffs2"
+#define CONFIG_BOOTCOMMAND     "nand read 0x22000000 0x200000 0x300000; bootm"
+#define CONFIG_BOOTARGS                                                        
\
+       "console=ttyS0,115200 earlyprintk "                             \
+       "mtdparts=atmel_nand:"                                          \
+       "8M(bootstrap/uboot/kernel)ro,-(rootfs) "                       \
+       "root=/dev/mtdblock1 rw rootfstype=jffs2"
 
 #endif
 
diff --git a/include/configs/at91sam9261ek.h b/include/configs/at91sam9261ek.h
index 611e3e2..fc7643b 100644
--- a/include/configs/at91sam9261ek.h
+++ b/include/configs/at91sam9261ek.h
@@ -212,16 +212,15 @@
 
 /* bootstrap + u-boot + env + linux in nandflash */
 #define CONFIG_ENV_IS_IN_NAND
-#define CONFIG_ENV_OFFSET              0x60000
-#define CONFIG_ENV_OFFSET_REDUND       0x80000
+#define CONFIG_ENV_OFFSET              0xc0000
+#define CONFIG_ENV_OFFSET_REDUND       0x100000
 #define CONFIG_ENV_SIZE                0x20000         /* 1 sector = 128 kB */
-#define CONFIG_BOOTCOMMAND     "nand read 0x22000000 0xA0000 0x200000; bootm"
-#define CONFIG_BOOTARGS                "console=ttyS0,115200 "                 
\
-                               "root=/dev/mtdblock5 "                  \
-                               "mtdparts=atmel_nand:128k(bootstrap)ro,"        
\
-                               "256k(uboot)ro,128k(env1)ro,"           \
-                               "128k(env2)ro,2M(linux),-(root) "       \
-                               "rw rootfstype=jffs2"
+#define CONFIG_BOOTCOMMAND     "nand read 0x22000000 0x200000 0x300000; bootm"
+#define CONFIG_BOOTARGS                                                        
\
+       "console=ttyS0,115200 earlyprintk "                             \
+       "mtdparts=atmel_nand:"                                          \
+       "8M(bootstrap/uboot/kernel)ro,-(rootfs) "                       \
+       "root=/dev/mtdblock1 rw rootfstype=jffs2"
 
 #endif
 
diff --git a/include/configs/at91sam9263ek.h b/include/configs/at91sam9263ek.h
index 3503822..fb94bc7 100644
--- a/include/configs/at91sam9263ek.h
+++ b/include/configs/at91sam9263ek.h
@@ -324,14 +324,15 @@
 
 /* bootstrap + u-boot + env + linux in nandflash */
 #define CONFIG_ENV_IS_IN_NAND          1
-#define CONFIG_ENV_OFFSET              0x60000
-#define CONFIG_ENV_OFFSET_REDUND       0x80000
+#define CONFIG_ENV_OFFSET              0xc0000
+#define CONFIG_ENV_OFFSET_REDUND       0x100000
 #define CONFIG_ENV_SIZE                0x20000         /* 1 sector = 128 kB */
-#define CONFIG_BOOTCOMMAND     "nand read 0x22000000 0xA0000 0x200000; bootm"
-#define CONFIG_BOOTARGS                "console=ttyS0,115200 " \
-                               "root=/dev/mtdblock5 " \
-                               
"mtdparts=atmel_nand:128k(bootstrap)ro,256k(uboot)ro,128k(env1)ro,128k(env2)ro,2M(linux),-(root)
 " \
-                               "rw rootfstype=jffs2"
+#define CONFIG_BOOTCOMMAND     "nand read 0x22000000 0x200000 0x300000; bootm"
+#define CONFIG_BOOTARGS                                                        
\
+       "console=ttyS0,115200 earlyprintk "                             \
+       "mtdparts=atmel_nand:"                                          \
+       "8M(bootstrap/uboot/kernel)ro,-(rootfs) "                       \
+       "root=/dev/mtdblock1 rw rootfstype=jffs2"
 
 #endif
 
diff --git a/include/configs/at91sam9m10g45ek.h 
b/include/configs/at91sam9m10g45ek.h
index e988d81..a09acd1 100644
--- a/include/configs/at91sam9m10g45ek.h
+++ b/include/configs/at91sam9m10g45ek.h
@@ -149,19 +149,18 @@
 
 /* bootstrap + u-boot + env in nandflash */
 #define CONFIG_ENV_IS_IN_NAND
-#define CONFIG_ENV_OFFSET              0x60000
-#define CONFIG_ENV_OFFSET_REDUND       0x80000
+#define CONFIG_ENV_OFFSET              0xc0000
+#define CONFIG_ENV_OFFSET_REDUND       0x100000
 #define CONFIG_ENV_SIZE                        0x20000
 
-#define CONFIG_BOOTCOMMAND     "nand read 0x70000000 0x100000 0x200000;" \
+#define CONFIG_BOOTCOMMAND                                             \
+       "nand read 0x70000000 0x200000 0x300000;"                       \
        "bootm 0x70000000"
 #define CONFIG_BOOTARGS                                                        
\
        "console=ttyS0,115200 earlyprintk "                             \
-       "root=/dev/mtdblock5 "                                          \
-       "mtdparts=atmel_nand:128k(bootstrap)ro,"                        \
-       "256k(uboot)ro,128k(env1)ro,128k(env2)ro,"                      \
-       "2M@1M(linux),-(root) "                                         \
-       "rw rootfstype=jffs2"
+       "mtdparts=atmel_nand:"                                          \
+       "8M(bootstrap/uboot/kernel)ro,-(rootfs) "                       \
+       "root=/dev/mtdblock1 rw rootfstype=jffs2"
 
 #define CONFIG_BAUDRATE                        115200
 
-- 
1.7.9.5

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to