Hi Albert,
please pull from u-boot-imx, thanks.
The following changes since commit 59852d03867108217fe88e3bfc3e1e9cedfe63c5:
Merge branch 'master' of git://www.denx.de/git/u-boot-microblaze
(2012-11-09 08:47:25 -0700)
are available in the git repository at:
git://www.denx.de/git/u-boot-imx.git master
for you to fetch changes up to 34275d70fec6cc369a931090ebb686bc213bb80d:
arch-mx6: add mx6dl_pins.h (2012-11-10 08:15:40 +0100)
----------------------------------------------------------------
Fabio Estevam (11):
mx25pdk: Include CONFIG_MX25
mx25pdk: Add esdhc support
pmic_fsl: Introduce FSL_PMIC_I2C_LENGTH
mx25: Place common functions into sys_proto.h
pmic: Add support for mc34704
mx25pdk: Add Ethernet support
mx53loco: Allow booting a zImage kernel
mx25pdk: Allow booting a zImage kernel
mx51evk: Allow booting a zImage kernel
mx35pdk: Allow booting a zImage kernel
mx6qsabre_common: Allow booting a zImage kernel
Stefano Babic (8):
ARM: Fix start.S when used with SPL in arm1136
MX35: add LOW_LEVEL_SRAM_STACK to use SPL_FRAMEWORK
MX35: Add soc_boot_mode and soc_boot_device to MX35
SPL: Added SPL target for mx35 SOC to SPL Makefile
ARM: Add SPL target to arm1136
MX35: add support for woodburn board
MX5: added CONFIG_PMIC_FSL_MC13892 to mx53evk
Merge git://git.denx.de/u-boot
Troy Kisky (4):
mx6: soc: update get_cpu_rev and get_imx_type for mx6solo/sololite
mx6: use CONFIG_MX6 instead of CONFIG_MX6Q
imx-common: cpu: add imx_ddr_size
arch-mx6: add mx6dl_pins.h
MAINTAINERS | 1 +
Makefile | 1 +
arch/arm/cpu/arm1136/config.mk | 3 +
arch/arm/cpu/arm1136/mx35/Makefile | 1 +
arch/arm/cpu/arm1136/mx35/generic.c | 75 ++++++
arch/arm/cpu/arm1136/mx35/mx35_sdram.c | 137 +++++++++++
arch/arm/cpu/arm1136/start.S | 31 ++-
arch/arm/cpu/arm1136/u-boot-spl.lds | 62 +++++
arch/arm/cpu/armv7/mx6/soc.c | 32 ++-
arch/arm/imx-common/cpu.c | 66 +++++-
arch/arm/include/asm/arch-mx25/imx-regs.h | 4 -
arch/arm/include/asm/arch-mx25/sys_proto.h | 3 +
arch/arm/include/asm/arch-mx35/imx-regs.h | 2 +
arch/arm/include/asm/arch-mx35/mmc_host_def.h | 31 +++
arch/arm/include/asm/arch-mx35/spl.h | 38 +++
arch/arm/include/asm/arch-mx35/sys_proto.h | 2 +
arch/arm/include/asm/arch-mx5/sys_proto.h | 10 +-
arch/arm/include/asm/arch-mx6/imx-regs.h | 2 +
arch/arm/include/asm/arch-mx6/mx6dl_pins.h | 149 ++++++++++++
arch/arm/include/asm/arch-mx6/sys_proto.h | 10 +-
board/freescale/mx25pdk/mx25pdk.c | 114 +++++++++
board/freescale/mx31ads/u-boot.lds | 2 +
board/syteco/zmx25/zmx25.c | 1 +
board/woodburn/Makefile | 43 ++++
board/woodburn/imximage.cfg | 4 +
board/woodburn/lowlevel_init.S | 38 +++
board/woodburn/woodburn.c | 261 +++++++++++++++++++++
boards.cfg | 2 +
drivers/gpio/mxc_gpio.c | 6 +-
drivers/misc/pmic_fsl.c | 8 +-
drivers/video/ipu_regs.h | 2 +-
include/configs/mx25pdk.h | 40 +++-
include/configs/mx35pdk.h | 2 +
include/configs/mx51evk.h | 2 +-
include/configs/mx53evk.h | 1 +
include/configs/mx53loco.h | 2 +
include/configs/mx6qarm2.h | 1 +
include/configs/mx6qsabre_common.h | 2 +
include/configs/mx6qsabrelite.h | 1 +
include/configs/woodburn.h | 34 +++
include/configs/woodburn_common.h | 313
+++++++++++++++++++++++++
include/configs/woodburn_sd.h | 60 +++++
include/mc34704.h | 49 ++++
nand_spl/board/freescale/mx31pdk/u-boot.lds | 2 +
spl/Makefile | 6 +
45 files changed, 1617 insertions(+), 39 deletions(-)
create mode 100644 arch/arm/cpu/arm1136/mx35/mx35_sdram.c
create mode 100644 arch/arm/cpu/arm1136/u-boot-spl.lds
create mode 100644 arch/arm/include/asm/arch-mx35/mmc_host_def.h
create mode 100644 arch/arm/include/asm/arch-mx35/spl.h
create mode 100644 arch/arm/include/asm/arch-mx6/mx6dl_pins.h
create mode 100644 board/woodburn/Makefile
create mode 100644 board/woodburn/imximage.cfg
create mode 100644 board/woodburn/lowlevel_init.S
create mode 100644 board/woodburn/woodburn.c
create mode 100644 include/configs/woodburn.h
create mode 100644 include/configs/woodburn_common.h
create mode 100644 include/configs/woodburn_sd.h
create mode 100644 include/mc34704.h
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de
=====================================================================
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
