On 10/26/2012 08:07:47 PM, xian...@openmobilefree.net wrote:
From: Xiangfu <xian...@openmobilefree.net>

  The JZ4740 CPU can load 8KB from two different addresses:
1. the normal area up to 8KB starting from NAND flash address 0x00000000 2. the backup area up to 8KB starting from NAND flash address 0x00002000

Signed-off-by: Xiangfu <xian...@openmobilefree.net>
---
 Makefile                          |   12 +++
 arch/mips/cpu/xburst/Makefile     |    7 +-
 arch/mips/cpu/xburst/cpu.c        |    4 +
 arch/mips/cpu/xburst/jz4740.c     |   82 +++++++----------
 arch/mips/cpu/xburst/spl/Makefile |   47 ++++++++++
 arch/mips/cpu/xburst/spl/start.S  |   63 +++++++++++++
 board/qi/qi_lb60/Makefile         |    4 +
 board/qi/qi_lb60/qi_lb60-spl.c    |   30 +++++++
 board/qi/qi_lb60/qi_lb60.c        |    8 +-
 board/qi/qi_lb60/u-boot-spl.lds   |   61 +++++++++++++
 drivers/mtd/nand/jz4740_nand.c    |   39 ++++++++-
include/configs/qi_lb60.h | 175 ++++++++++++++++++-------------------
 12 files changed, 386 insertions(+), 146 deletions(-)
 create mode 100644 arch/mips/cpu/xburst/spl/Makefile
 create mode 100644 arch/mips/cpu/xburst/spl/start.S
 create mode 100644 board/qi/qi_lb60/qi_lb60-spl.c
 create mode 100644 board/qi/qi_lb60/u-boot-spl.lds

For the drivers/mtd/nand part:
Acked-by: Scott Wood <scottw...@freescale.com>

-Scott
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to