This adds support for WIFI/BT GPIOs which were previously missing.
Signed-off-by: Anders Hedlund <anders.j.hedl...@gmail.com>
Cc: Enric Balletbo i Serra <eballe...@iseebcn.com>
Cc: Jonas Zetterberg <j...@jozz.se>
---
board/isee/igep0020/igep0020.h | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/board/isee/igep0020/igep0020.h b/board/isee/igep0020/igep0020.h
index 3335ecc..283b75e 100644
--- a/board/isee/igep0020/igep0020.h
+++ b/board/isee/igep0020/igep0020.h
@@ -132,6 +132,12 @@ static void setup_net_chip(void);
MUX_VAL(CP(MMC1_DAT1), (IEN | PTU | EN | M0)) /* MMC1_DAT1 */\
MUX_VAL(CP(MMC1_DAT2), (IEN | PTU | EN | M0)) /* MMC1_DAT2 */\
MUX_VAL(CP(MMC1_DAT3), (IEN | PTU | EN | M0)) /* MMC1_DAT3 */\
+ MUX_VAL(CP(CAM_HS), (IDIS | PTU | DIS | M4)) /* GPIO_94 */\
+ MUX_VAL(CP(CAM_VS), (IDIS | PTU | DIS | M4)) /* GPIO_95 */\
+ MUX_VAL(CP(MMC2_DAT4), (IDIS | PTU | DIS | M4)) /* GPIO_136 */\
+ MUX_VAL(CP(MMC2_DAT5), (IDIS | PTU | DIS | M4)) /* GPIO_137 */\
+ MUX_VAL(CP(MMC2_DAT6), (IDIS | PTU | DIS | M4)) /* GPIO_138 */\
+ MUX_VAL(CP(MMC2_DAT7), (IDIS | PTU | DIS | M4)) /* GPIO_139 */\
MUX_VAL(CP(UART3_TX_IRTX), (IDIS | PTD | DIS | M0)) /* UART3_TX */\
MUX_VAL(CP(UART3_RX_IRRX), (IEN | PTD | DIS | M0)) /* UART3_RX */\
MUX_VAL(CP(I2C1_SCL), (IEN | PTU | EN | M0)) /* I2C1_SCL */\
--
1.7.10.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
