Hi Pali Rohár,
On 10/19/12 14:00, Pali Rohár wrote:
> This patch adding support for new board Nokia RX-51 (N900).
>
> Based on previous work by: Alistair Buxton <a.j.bux...@gmail.com>
>
> Signed-off-by: Pali Rohár <pali.ro...@gmail.com>
> Cc: Ивайло Димитров <freemangor...@abv.bg>
> ---
[...]
> diff --git a/board/nokia/rx51/rx51.c b/board/nokia/rx51/rx51.c
> new file mode 100644
> index 0000000..60446cb
> --- /dev/null
> +++ b/board/nokia/rx51/rx51.c
[...]
> +/*
> + * Routine: board_init
> + * Description: Early hardware init.
> + */
> +int board_init(void)
> +{
> + gpmc_init(); /* in SRAM or SDRAM, finish GPMC */
> + /* board id for Linux */
> + gd->bd->bi_arch_number = MACH_TYPE_NOKIA_RX51;
This should be specified in the board config file
(see CONFIG_MACH_TYPE in README), unless, you have multiple
board types supported in the same board file/binary
(which does not look like the case here) and it is runtime
detectable.
> + /* boot param addr */
> + gd->bd->bi_boot_params = OMAP34XX_SDRC_CS0 + 0x100;
> +
> + return 0;
> +}
[...]
--
Regards,
Igor.
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
