Hi Yann,
On Fri, 5 Oct 2012 14:09:58 +0200, Yann Vernier
<yann.vern...@orsoc.se> wrote:
> Previously code to do this was in the Ethernet driver itself.
> Since it is board specific, moved it here, and altered it to
> support preset MAC from environment.
> ---
> board/cm4008/cm4008.c | 12 ++++++++++++
> board/cm41xx/cm41xx.c | 12 ++++++++++++
> 2 files changed, 24 insertions(+)
>
> diff --git a/board/cm4008/cm4008.c b/board/cm4008/cm4008.c
> index 6c0da9a..e14f8f4 100644
> --- a/board/cm4008/cm4008.c
> +++ b/board/cm4008/cm4008.c
> @@ -75,10 +75,22 @@ int board_late_init (void)
> return 0;
> }
>
> +#ifdef CONFIG_DRIVER_KS8695ETH
> int board_eth_init(bd_t *bis)
> {
> + uchar enetaddr[6];
> + const uchar * const fp=CONFIG_SYS_FLASH_BASE+0x1c000;
> +
> + /* read MAC address from flash */
> + if (!eth_getenv_enetaddr("ethaddr", enetaddr)) {
> + memcpy(&enetaddr[0], fp, 6);
> + if (is_valid_ether_addr(enetaddr))
> + eth_setenv_enetaddr("ethaddr", enetaddr);
> + }
> +
> return ks8695_eth_initialize();
> }
> +#endif
>
> int board_init (void)
> {
> diff --git a/board/cm41xx/cm41xx.c b/board/cm41xx/cm41xx.c
> index 6aef617..771701d 100644
> --- a/board/cm41xx/cm41xx.c
> +++ b/board/cm41xx/cm41xx.c
> @@ -75,10 +75,22 @@ int board_late_init (void)
> return 0;
> }
>
> +#ifdef CONFIG_DRIVER_KS8695ETH
> int board_eth_init(bd_t *bis)
> {
> + uchar enetaddr[6];
> + const uchar * const fp=CONFIG_SYS_FLASH_BASE+0x1c000;
Magic number here.
> +
> + /* read MAC address from flash */
> + if (!eth_getenv_enetaddr("ethaddr", enetaddr)) {
> + memcpy(&enetaddr[0], fp, 6);
> + if (is_valid_ether_addr(enetaddr))
> + eth_setenv_enetaddr("ethaddr", enetaddr);
> + }
> +
> return ks8695_eth_initialize();
> }
> +#endif
>
> int board_init (void)
> {
Amicalement,
--
Albert.
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
