Hi Yann,
On Fri, 5 Oct 2012 14:09:53 +0200, Yann Vernier
<yann.vern...@orsoc.se> wrote:
> Changed CONFIG_SYS_TEXT_BASE to actual address (required for
> board_init_f) and moved it into cm4{008,1xx}.h, along with a warning
> that it must match CONFIG_SYS_FLASH_BASE (since lowlevel_init
> relocates there).
> lowlevel_init now uses CONFIG_SYS_RCS0_BASE to map ROM.
> ---
> Changes for v2:
> - Update to use CONFIG_SYS_FLASH_ constants only (no PHYS_FLASH)
> - Use tabs where appropriate
> - Update cm41xx also
> - Explain the lowlevel_init change
> Changes for v3:
> - Use memory mappings per defined macros
> - Change the final adjustment of lr and ip
> - Verified mapping flash at 0x3000000 on KS8695X demo board
> ---
> arch/arm/cpu/arm920t/ks8695/lowlevel_init.S | 63
> +++++++++++++++++++--------
> board/cm4008/config.mk | 1 -
> board/cm41xx/config.mk | 1 -
> 3 files changed, 45 insertions(+), 20 deletions(-)
>
> diff --git a/arch/arm/cpu/arm920t/ks8695/lowlevel_init.S
> b/arch/arm/cpu/arm920t/ks8695/lowlevel_init.S
> index 1bba571..74579ed 100644
> --- a/arch/arm/cpu/arm920t/ks8695/lowlevel_init.S
> +++ b/arch/arm/cpu/arm920t/ks8695/lowlevel_init.S
> @@ -25,6 +25,7 @@
> #include <config.h>
> #include <version.h>
> #include <asm/arch/platform.h>
> +#include <asm/arch/regvalues.h>
>
> #ifndef CONFIG_SKIP_LOWLEVEL_INIT
>
> @@ -91,12 +92,31 @@ lowlevel_init:
> * remap the memory and flash regions. we want to end up with
> * ram from address 0, and flash at 32MB.
> */
> +#if CONFIG_SYS_RCS0_BASE!=CONFIG_SYS_TEXT_BASE
> +#error CONFIG_SYS_RCS0_BASE and CONFIG_SYS_TEXT_BASE must match for
> highflash address to work
> + /* Also needed for pointers in board_init_f() */
> +#endif
> +#if CONFIG_SYS_RCS0_BASE>=KS8695_IO_BASE
> +#error Cannot relocate ROM past IO registers
> + /* Firstly, the IO registers are at the top supported address.
> + Secondly, as we grow the ROM region it must not overlap the
> registers. */
> +#endif
> +#if CONFIG_SYS_RCS0_BASE&0xffff
> +#error Cannot map memory to addresses not divisible by 64K
> +#endif
> ldr r1, =(KS8695_IO_BASE+KS8695_MEM_CTRL0)
> - ldr r2, =0xbfc00040
> + /* The default ROM mapping is at 0x0 - 0x01ffffff.
> + Remap it to 0x0 - 0x03feffff so that it covers 0x02000000,
> + where CONFIG_SYS_FLASH_BASE maps it, as well as 0.
> + Relies on the limited address lines to repeat ROM images
> + on every multiple of the real ROM size. */
> + ldr r2,
> =(KS8695_MEM_RANGE(0,0x03ff0000)|(CONFIG_KS8695_ROMCON0_VALUE&0xfff))
> str r2, [r1] /* large flash map */
> - ldr pc, =(highflash+0x02000000-0x00f00000) /* jump to high flash
> address */
> + /* Relies on CONFIG_SYS_RCS0_BASE==CONFIG_SYS_TEXT_BASE */
> + ldr pc, =(highflash) /* jump to high flash address */
> highflash:
> - ldr r2, =0x8fe00040
> + /* Move ROM to high address, and reconfigure to 4MiB size */
> + ldr r2, =CONFIG_KS8695_ROMCON0_VALUE
> str r2, [r1] /* remap flash range */
>
> /*
> @@ -105,28 +125,35 @@ highflash:
> * then you can have it all mapped nicely. Has no effect if you
> * only have a 4Mb or smaller flash.
> */
> +#if CONFIG_SYS_RCS1_WIDTH
> ldr r1, =(KS8695_IO_BASE+KS8695_MEM_CTRL1)
> - ldr r2, =0x9fe40040
> + ldr r2, =CONFIG_KS8695_ROMCON1_VALUE
> str r2, [r1] /* remap flash2 region, contiguous */
> - ldr r1, =(KS8695_IO_BASE+KS8695_MEM_GENERAL)
> - ldr r2, =0x30000005
> - str r2, [r1] /* enable both flash selects */
> +#endif
>
> -#ifdef CONFIG_CM41xx
> /*
> - * map the second flash chip, using the external IO lines.
> + * map additional flash chip, using the external IO lines.
> */
> +#if CONFIG_SYS_ECS0_WIDTH
> ldr r1, =(KS8695_IO_BASE+KS8695_IO_CTRL0)
> - ldr r2, =0xafe80b6d
> - str r2, [r1] /* remap io0 region, contiguous */
> + ldr r2, =CONFIG_KS8695_EXTACON0_VALUE
> + str r2, [r1] /* map io0 region */
> +#endif
> +#if CONFIG_SYS_ECS1_WIDTH
> ldr r1, =(KS8695_IO_BASE+KS8695_IO_CTRL1)
> - ldr r2, =0xbfec0b6d
> - str r2, [r1] /* remap io1 region, contiguous */
> - ldr r1, =(KS8695_IO_BASE+KS8695_MEM_GENERAL)
> - ldr r2, =0x30050005
> - str r2, [r1] /* enable second flash */
> + ldr r2, =CONFIG_KS8695_EXTACON1_VALUE
> + str r2, [r1] /* map io1 region */
> +#endif
> +#if CONFIG_SYS_ECS2_WIDTH
> + ldr r1, =(KS8695_IO_BASE+KS8695_IO_CTRL2)
> + ldr r2, =CONFIG_KS8695_EXTACON2_VALUE
> + str r2, [r1] /* map io2 region */
> #endif
>
> + ldr r1, =(KS8695_IO_BASE+KS8695_MEM_GENERAL)
> + ldr r2, =CONFIG_KS8695_ERGCON_VALUE
> + str r2, [r1] /* enable relevant flash selects */
> +
> /*
> * before relocating, we have to setup RAM timing
> */
> @@ -198,8 +225,8 @@ highflash:
> nobutton:
> #endif
>
> - add lr, lr, #0x02000000 /* flash is now mapped high */
> - add ip, ip, #0x02000000 /* this is a hack */
> + add lr, lr, #CONFIG_SYS_TEXT_BASE /* flash is now mapped high */
> + add ip, ip, #CONFIG_SYS_TEXT_BASE /* this is a hack */
> mov pc, lr /* all done, return */
>
> #endif /* CONFIG_SKIP_LOWLEVEL_INIT */
> diff --git a/board/cm4008/config.mk b/board/cm4008/config.mk
> deleted file mode 100644
> index 0d5923b..0000000
> --- a/board/cm4008/config.mk
> +++ /dev/null
> @@ -1 +0,0 @@
> -CONFIG_SYS_TEXT_BASE = 0x00f00000
> diff --git a/board/cm41xx/config.mk b/board/cm41xx/config.mk
> deleted file mode 100644
> index 0d5923b..0000000
> --- a/board/cm41xx/config.mk
> +++ /dev/null
> @@ -1 +0,0 @@
> -CONFIG_SYS_TEXT_BASE = 0x00f00000
This seems to remove CONFIG_SYS_TEXT_BASE from config.mk files but does
not put it elsewhere. How do the corresponding boards build once this
patch is applied?
Amicalement,
--
Albert.
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
