Add calls to the LCD driver from Nvidia board code.
Signed-off-by: Simon Glass <s...@chromium.org>
---
Changes in v7:
- Rebase onto upstream/master
Changes in v4:
- Change order of LCD init so that PWM comes first
Changes in v3:
- Add separate call to pwm_init() in board_init()
board/nvidia/common/board.c | 19 +++++++++++++++++++
1 files changed, 19 insertions(+), 0 deletions(-)
diff --git a/board/nvidia/common/board.c b/board/nvidia/common/board.c
index f23c87d..76ec687 100644
--- a/board/nvidia/common/board.c
+++ b/board/nvidia/common/board.c
@@ -26,6 +26,7 @@
#include <linux/compiler.h>
#include <asm/io.h>
#include <asm/arch/clock.h>
+#include <asm/arch/display.h>
#include <asm/arch/emc.h>
#include <asm/arch/funcmux.h>
#include <asm/arch/pinmux.h>
@@ -124,6 +125,9 @@ int board_init(void)
if (pwm_init(gd->fdt_blob))
debug("%s: Failed to init pwm\n", __func__);
#endif
+#ifdef CONFIG_LCD
+ tegra_lcd_check_next_stage(gd->fdt_blob, 0);
+#endif
/* boot param addr */
gd->bd->bi_boot_params = (NV_PA_SDRAM_BASE + 0x100);
@@ -149,6 +153,9 @@ int board_init(void)
pin_mux_usb();
board_usb_init(gd->fdt_blob);
#endif
+#ifdef CONFIG_LCD
+ tegra_lcd_check_next_stage(gd->fdt_blob, 0);
+#endif
#ifdef CONFIG_TEGRA_NAND
pin_mux_nand();
@@ -179,7 +186,19 @@ int board_early_init_f(void)
/* Initialize periph GPIOs */
gpio_early_init();
gpio_early_init_uart();
+#ifdef CONFIG_LCD
+ tegra_lcd_early_init(gd->fdt_blob);
+#endif
return 0;
}
#endif /* EARLY_INIT */
+
+int board_late_init(void)
+{
+#ifdef CONFIG_LCD
+ /* Make sure we finish initing the LCD */
+ tegra_lcd_check_next_stage(gd->fdt_blob, 1);
+#endif
+ return 0;
+}
--
1.7.7.3
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
