Hi Stephen, On Fri, 12 Oct 2012 15:30:42 -0600, Stephen Warren <swar...@wwwdotorg.org> wrote:
> On 10/12/2012 03:26 PM, Tom Warren wrote: > > Folks, > > > > u-boot-tegra/next has been updated with new patches from Lucas, Marc, and > > Stephen, rebased against u-boot-arm, and pushed to denx.de. > > u-boot-tegra/next right now is based on u-boot-arm/master, but includes > patches that are both: > > a) Already in u-boot-arm/next (but *not* u-boot-arm/master since master > is for the current release and next is for the next release) > > b) New. > > I think you want to create (rebase) u-boot-tegra/next based on > u-boot-arm/next, and drop the following patches (they would rebase out > anyway if you just rebase onto u-boot-arm/next): > > c699a7b tegra: nand: add board pinmux > c7560dd tegra: clean up board include hell > 1ddfbf3 tegra: add funcmux entry for NAND attached to KBC > 8d49ab8 tegra20: rework UART GPIO handling > 5904a2e tegra20: add clock_set_pllout function > 0e0eb51 tegra20: complete periph_id enum > 7811a6d tegra: enable CONFIG_CMD_PART > 517ef6d Tegra20: Move some include files to arch-tegra for sharing with > Tegra30 > 1367676 Tegra20: Move some code files to common directories for upcoming > Tegra30 patches. > 7d92ef4 tegra: Rename Medcom to Medcom-Wide > c527d55 tegra: Update Avionic Design vendor prefix I've rebased arm/next onto u-boot/next as they are now in sync -- whatever was on my next is now on master or in u-boot/next, with the addition of the lh7a40x removal. Amicalement, -- Albert. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
