Hi, Andreas
On 10/10/2012 5:51 AM, Andreas Bießmann wrote:
Hi Josh,
On 09.10.12 12:11, Josh Wu wrote:
Hi, Andreas
Any feedback of these patches?
short answer: no ;)
I think they could go into next (no obvious objections), but I would
like to do some runtime tests on avr32 before. Beside that, if you do
not insist on applying them ASAP to next I would like to wait until the
release next Monday and apply the patches to u-boot-atmel/master then.
Is that OK for you?
Yes, I'm fine with this. thank you.
Best Regards,
Josh Wu
Best regards
Andreas Bießmann
Best Regards,
Josh Wu
On 9/14/2012 4:22 PM, Josh Wu wrote:
This patch series enable MCI0 solt in at91sam9x5ek board.
Josh Wu (3):
mmc: at91: add multi block read/write support.
ARM: at91sam9x5: enable MCI0 support for 9x5ek board.
mmc: at91: use max timeout value. It will avoid some situation that
timeout happened.
arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c | 15 +++++++++++++++
board/atmel/at91sam9x5ek/at91sam9x5ek.c | 10 ++++++++++
drivers/mmc/gen_atmel_mci.c | 15 +++++++++++++--
include/atmel_mci.h | 7 ++++++-
include/configs/at91sam9x5ek.h | 10 ++++++++++
5 files changed, 54 insertions(+), 3 deletions(-)
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
