On 04/10/2012 03:47, Troy Kisky wrote:
> Use CONFIG_MX6 when the particular processor
> variant isn't important.
>
> Reserve the use of CONFIG_MX6Q to
> specifically test for quad cores variant.
>
> Signed-off-by: Troy Kisky <troy.ki...@boundarydevices.com>
> ---
> drivers/gpio/mxc_gpio.c | 6 +++---
> drivers/video/ipu_regs.h | 2 +-
> include/configs/mx6qarm2.h | 1 +
> include/configs/mx6qsabre_common.h | 1 +
> include/configs/mx6qsabrelite.h | 1 +
> 5 files changed, 7 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/gpio/mxc_gpio.c b/drivers/gpio/mxc_gpio.c
> index 2c79bff..a388064 100644
> --- a/drivers/gpio/mxc_gpio.c
> +++ b/drivers/gpio/mxc_gpio.c
> @@ -42,14 +42,14 @@ static unsigned long gpio_ports[] = {
> [1] = GPIO2_BASE_ADDR,
> [2] = GPIO3_BASE_ADDR,
> #if defined(CONFIG_MX25) || defined(CONFIG_MX27) || defined(CONFIG_MX51) || \
> - defined(CONFIG_MX53) || defined(CONFIG_MX6Q)
> + defined(CONFIG_MX53) || defined(CONFIG_MX6)
> [3] = GPIO4_BASE_ADDR,
> #endif
> -#if defined(CONFIG_MX27) || defined(CONFIG_MX53) || defined(CONFIG_MX6Q)
> +#if defined(CONFIG_MX27) || defined(CONFIG_MX53) || defined(CONFIG_MX6)
> [4] = GPIO5_BASE_ADDR,
> [5] = GPIO6_BASE_ADDR,
> #endif
> -#if defined(CONFIG_MX53) || defined(CONFIG_MX6Q)
> +#if defined(CONFIG_MX53) || defined(CONFIG_MX6)
> [6] = GPIO7_BASE_ADDR,
> #endif
> };
> diff --git a/drivers/video/ipu_regs.h b/drivers/video/ipu_regs.h
> index a43aa03..982e252 100644
> --- a/drivers/video/ipu_regs.h
> +++ b/drivers/video/ipu_regs.h
> @@ -55,7 +55,7 @@
> #define IPU_TPM_REG_BASE 0x01060000
> #define IPU_DC_TMPL_REG_BASE 0x01080000
> #define IPU_ISP_TBPR_REG_BASE 0x010C0000
> -#elif defined(CONFIG_MX6Q)
> +#elif defined(CONFIG_MX6)
> #define IPU_CPMEM_REG_BASE 0x00100000
> #define IPU_LUT_REG_BASE 0x00120000
> #define IPU_SRM_REG_BASE 0x00140000
> diff --git a/include/configs/mx6qarm2.h b/include/configs/mx6qarm2.h
> index 965bea3..8e5b81e 100644
> --- a/include/configs/mx6qarm2.h
> +++ b/include/configs/mx6qarm2.h
> @@ -22,6 +22,7 @@
> #ifndef __CONFIG_H
> #define __CONFIG_H
>
> +#define CONFIG_MX6
> #define CONFIG_MX6Q
> #define CONFIG_DISPLAY_CPUINFO
> #define CONFIG_DISPLAY_BOARDINFO
> diff --git a/include/configs/mx6qsabre_common.h
> b/include/configs/mx6qsabre_common.h
> index 247e8d6..5a940da 100644
> --- a/include/configs/mx6qsabre_common.h
> +++ b/include/configs/mx6qsabre_common.h
> @@ -17,6 +17,7 @@
> #ifndef __MX6QSABRE_COMMON_CONFIG_H
> #define __MX6QSABRE_COMMON_CONFIG_H
>
> +#define CONFIG_MX6
> #define CONFIG_MX6Q
> #define CONFIG_DISPLAY_CPUINFO
> #define CONFIG_DISPLAY_BOARDINFO
> diff --git a/include/configs/mx6qsabrelite.h b/include/configs/mx6qsabrelite.h
> index e7bf658..6a10232 100644
> --- a/include/configs/mx6qsabrelite.h
> +++ b/include/configs/mx6qsabrelite.h
> @@ -22,6 +22,7 @@
> #ifndef __CONFIG_H
> #define __CONFIG_H
>
> +#define CONFIG_MX6
> #define CONFIG_MX6Q
> #define CONFIG_DISPLAY_CPUINFO
> #define CONFIG_DISPLAY_BOARDINFO
>
This changes affects also mx6qsabreauto and mx6qsabresd, that I have
already merged.
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de
=====================================================================
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
