On 10/05/2012 12:29 PM, Albert ARIBAUD wrote:
Hi Eric,
On Fri, 05 Oct 2012 11:42:19 -0700, Eric Nelson
<eric.nel...@boundarydevices.com> wrote:
On 10/05/2012 10:24 AM, Albert ARIBAUD wrote:
Hi Eric,
On Thu, 4 Oct 2012 12:49:07 -0700, Eric Nelson
<eric.nel...@boundarydevices.com> wrote:
Signed-off-by: Eric Nelson<eric.nel...@boundarydevices.com>
---
board/boundary/nitrogen6x/Makefile | 41 ++
board/boundary/nitrogen6x/README | 77 +++
board/boundary/nitrogen6x/nitrogen6x.c | 840
++++++++++++++++++++++++++++++++
boards.cfg | 1 +
include/configs/nitrogen6x.h | 242 +++++++++
5 files changed, 1201 insertions(+), 0 deletions(-)
create mode 100644 board/boundary/nitrogen6x/Makefile
create mode 100644 board/boundary/nitrogen6x/README
create mode 100644 board/boundary/nitrogen6x/nitrogen6x.c
create mode 100644 include/configs/nitrogen6x.h
If this is essentially a copy of sabrelite, I am surprised that git
does not report any copies. Did you use -C with git format-patch ?
Hi Albert,
I didn't use '-C' (didn't know about it: thanks for the tip!).
It wouldn't have detected copies though, because I made slight
changes in each of these files, replacing the board names and
file names in board/boundary/ and altering the default environment
(policy bits) in nitrogen6x.h.
You should try -C. It does actually handle well 'imperfect' copies with
slight, or not so light changes.
Thanks again for the tip Albert. I'll use this for V2 (and knowing my
history, probably V3...).
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
