On 09/27/2012 06:44 PM, Simon Glass wrote: > This series adds support for the Tegra2x's display peripheral. This > supports the LCD display on Seaboard and we use this to enable console > output in U-Boot on the LCD.
I tested this on Seaboard, and found a couple of minor issues: 1) Nothing sets up the environment to enable LCD output; I had to execute: setenv stdout serial,lcd ... in order to see anything on the display. I'd expect patch 16/16 to cause this to happen automatically? It's probably best to fix this by revising patch 16 rather than later, since I presume this is trivial to fix? 2) The display works fine for cold boot, or hitting the physical reset button, but when I execute "reset" at the U-Boot prompt, or "reboot" within Linux, the display is messed up; it looks like the LCD isn't able to sync to the timings sent by the display controller or something similar. Since this is slightly a corner case, it may be OK to fix it later (but not much later; reboot is very useful to me.) I'll provide review comments on the patches themselves later. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
