On Sat, Sep 29, 2012 at 11:51:53PM +0200, Marek Vasut wrote:
> This patchset is a STAGE 1 of preparation of the stdio and serial subsys
> for the driver model.
>
> The idea of this patchset is:
>
> 1) Clean up the struct serial_device
> Do a coding style cleanup.
> 2) Replace .init and .uninit with .start and .stop
> This is to bring struct serial_device much closer to struct stdio_dev
> so later on, these structures can be overlayed and struct serial_device
> can be easily passed to stdio subsystem directly.
> 3) Do minor cleanups on the PXA and MPC512X
> Basically for PXA this means to remove default_serial_console() call
> from every single PXA board and move it into PXA serial driver. For
> MPC512X, that means properly defining PSC console number.
> 4) Add support for CONFIG_SERIAL_MULTI into every single driver
> Implement support for both non-multi and multi operation into every
> single serial driver in the U-Boot source tree. This is a vast majority
> of this patchset.
> 5) Unconditionally enable CONFIG_SERIAL_MULTI
> Enable the multi operation throughout the whole U-Boot tree, both for
> SPL and non-SPL builds. There was also some breakage due to this, so
> this patchset also addresses that with minor fixes.
> 6) Remove unused code used for the non-multi operation
> Remove code that was used when CONFIG_SERIAL_MULTI was not selected.
> Also remove all occurances of CONFIG_SERIAL_MULTI throughout the source
> tree. Some parts of the code must have been adjusted to cope with this
> since they were initially only written for non-multi operation. These
> were minor adjustments mostly in macros though.
>
> This changeset obviously does mean size growth of U-Boot, therefore some
> statistics (stock U-Boot first, patchset last):
>
> Configuring for omap3_beagle board...
> text data bss dec hex filename
> 325687 8456 266888 601031 92bc7 ./u-boot
> 326912 8648 266944 602504 93188 ./u-boot
> 43082 1812 198020 242914 3b4e2 ./spl/u-boot-spl
> 45794 1860 198020 245674 3bfaa ./spl/u-boot-spl
>
> Configuring for P1020RDB-PC_36BIT_SPIFLASH - Board: p1_p2_rdb_pc, Options:
> P1020RDB,36BIT,SPIFLASH
> text data bss dec hex filename
> 392469 30628 267568 690665 a89e9 ./u-boot
> 394550 30940 267600 693090 a9362 ./u-boot
>
> Configuring for grsim_leon2 board...
> text data bss dec hex filename
> 95658 3328 2640 101626 18cfa ./u-boot
> 97058 3384 2640 103082 192aa ./u-boot
>
> Configuring for sandbox board...
> text data bss dec hex filename
> 137394 6364 28488 172246 2a0d6 ./u-boot
> 138674 6456 28504 173634 2a642 ./u-boot
>
> V2: Rebase on top of current -next
> V3: - Fix problem with new SPL framework (2 new patches)
> - mv drivers/serial/serial{,-ns16550}.c to make clear
> what that driver really is [ 0065/0072 ]
> - Move common/serial.c do drivers/serial, since it really has
> to link with libserial.o, not libcommon.o [ 0066/0072 ]
>
> Marek Vasut (72):
> serial: Coding style cleanup of struct serial_device
> serial: Rename .init() and .uninit() in serial_device
> serial: Properly spell out the structure member names of
> serial_driver
> serial: pxa: Implement default_serial_console in serial_pxa.c
> serial: pxa: Make use of default_serial_console in serial_pxa
> serial: pxa: Make local functions static
> serial: mpc512x: Properly define CONFIG_SYS_PSC3 in config files
> serial: Implement serial_initfunc() macro
> serial: mpc8xx: Move serial registration from serial_initialize()
> serial: s3c24xx: Move serial registration from serial_initialize()
> serial: pxa: Move serial registration from serial_initialize()
> serial: s5p: Move serial registration from serial_initialize()
> serial: microblaze: Move serial registration from serial_initialize()
> serial: mpc512x: Move serial registration from serial_initialize()
> serial: ns16550: Move serial registration from serial_initialize()
> serial: bfin: Remove the bfin_serialN_device exports from serial.h
> serial: bfin: Adjust serial_register_bfin_uart()
> serial: zoom2: Remove zoom2 serial prototypes from serial.h
> serial: bfin: Flip the jtag serial console to CONFIG_SERIAL_MULTI
> serial: mips: Implement CONFIG_SERIAL_MULTI into au1x00 serial driver
> serial: mips: Implement CONFIG_SERIAL_MULTI into asc serial driver
> serial: mips: Implement CONFIG_SERIAL_MULTI into JZ serial driver
> serial: powerpc: Implement CONFIG_SERIAL_MULTI into mpc5xx serial
> driver
> serial: powerpc: Implement CONFIG_SERIAL_MULTI into mpc8220 serial
> driver
> serial: powerpc: Implement CONFIG_SERIAL_MULTI into mpc8260 serial
> drivers
> serial: powerpc: Implement CONFIG_SERIAL_MULTI into mpc85xx serial
> driver
> serial: powerpc: Implement CONFIG_SERIAL_MULTI into iop480 serial
> driver
> serial: sparc: Implement CONFIG_SERIAL_MULTI into leon2 serial driver
> serial: sparc: Implement CONFIG_SERIAL_MULTI into leon3 serial driver
> serial: powerpc: Implement CONFIG_SERIAL_MULTI into marvell serial
> driver
> serial: powerpc: Implement CONFIG_SERIAL_MULTI into amirix serial
> driver
> serial: powerpc: Implement CONFIG_SERIAL_MULTI into bmw serial driver
> serial: powerpc: Implement CONFIG_SERIAL_MULTI into cogent serial
> driver
> serial: powerpc: Implement CONFIG_SERIAL_MULTI into cpci750 serial
> driver
> serial: powerpc: Implement CONFIG_SERIAL_MULTI into evb64260 serial
> driver
> serial: powerpc: Implement CONFIG_SERIAL_MULTI into ml2 serial driver
> serial: powerpc: Implement CONFIG_SERIAL_MULTI into sconsole serial
> driver
> serial: powerpc: Implement CONFIG_SERIAL_MULTI into p3mx serial
> driver
> serial: arm: Implement CONFIG_SERIAL_MULTI into altera_jtag serial
> driver
> serial: arm: Implement CONFIG_SERIAL_MULTI into altera serial driver
> serial: arm: Implement CONFIG_SERIAL_MULTI into atmel serial driver
> serial: arm: Implement CONFIG_SERIAL_MULTI into lpc32xx serial driver
> serial: mcf: Implement CONFIG_SERIAL_MULTI into MCF serial driver
> serial: Implement CONFIG_SERIAL_MULTI into ns9750 serial driver
> serial: oc: Implement CONFIG_SERIAL_MULTI into OpenCores serial
> driver
> serial: arm: Implement CONFIG_SERIAL_MULTI into s3c4510b serial
> driver
> serial: arm: Implement CONFIG_SERIAL_MULTI into s3c64xx serial driver
> serial: sandbox: Implement CONFIG_SERIAL_MULTI into sandbox serial
> driver
> serial: arm: Implement CONFIG_SERIAL_MULTI into clps7111 serial
> driver
> serial: arm: Implement CONFIG_SERIAL_MULTI into imx serial driver
> serial: arm: Implement CONFIG_SERIAL_MULTI into ixp serial driver
> serial: arm: Implement CONFIG_SERIAL_MULTI into ks8695 serial driver
> serial: arm: Implement CONFIG_SERIAL_MULTI into lh7a40x serial driver
> serial: arm: Implement CONFIG_SERIAL_MULTI into lpc2292 serial driver
> serial: Implement CONFIG_SERIAL_MULTI into max3100 serial driver
> serial: arm: Implement CONFIG_SERIAL_MULTI into mxc serial driver
> serial: arm: Implement CONFIG_SERIAL_MULTI into netarm serial driver
> serial: arm: Implement CONFIG_SERIAL_MULTI into pl01x serial driver
> serial: arm: Implement CONFIG_SERIAL_MULTI into s3c44b0 serial driver
> serial: arm: Implement CONFIG_SERIAL_MULTI into sa1100 serial driver
> serial: sh: Implement CONFIG_SERIAL_MULTI into sh serial driver
> serial: mxs: spl: Remove empty serial_* functions from SPL code
> serial: Use puts() and hang() instead of panic() in SPL
> serial: ns16550: Call usbtty_poll only in non-SPL build
> serial: ns16550: Rename serial.c to serial_ns16550.c
> serial: Move common/serial.c to drivers/serial/
> serial: Unconditionally enable CONFIG_SERIAL_MULTI
> serial: Remove CONFIG_SERIAL_MULTI from config files
> serial: Remove CONFIG_SERIAL_MULTI from serial drivers
> serial: Remove CONFIG_SERIAL_MULTI from remaining sources
> serial: Compile drivers/serial/serial.c by default
> serial: Enhance the manual relocation
>
> arch/arm/cpu/arm926ejs/mxs/spl_boot.c | 4 -
> arch/arm/lib/board.c | 2 -
> arch/blackfin/cpu/jtag-console.c | 37 +-
> arch/blackfin/cpu/serial.c | 6 +-
> arch/blackfin/lib/board.c | 2 -
> arch/m68k/lib/board.c | 2 -
> arch/microblaze/lib/board.c | 2 -
> arch/mips/cpu/mips32/au1x00/au1x00_serial.c | 42 +-
> arch/mips/cpu/mips32/incaip/asc_serial.c | 35 +-
> arch/mips/cpu/xburst/jz_serial.c | 35 +-
> arch/nds32/lib/board.c | 2 -
> arch/powerpc/cpu/mpc512x/serial.c | 92 ++---
> arch/powerpc/cpu/mpc5xx/serial.c | 69 ++--
> arch/powerpc/cpu/mpc5xxx/serial.c | 181 +++-----
> arch/powerpc/cpu/mpc8220/uart.c | 35 +-
> arch/powerpc/cpu/mpc8260/serial_scc.c | 39 +-
> arch/powerpc/cpu/mpc8260/serial_smc.c | 39 +-
> arch/powerpc/cpu/mpc85xx/serial_scc.c | 39 +-
> arch/powerpc/cpu/mpc8xx/serial.c | 43 +-
> arch/powerpc/cpu/ppc4xx/iop480_uart.c | 36 +-
> arch/powerpc/lib/board.c | 2 -
> arch/sandbox/lib/board.c | 2 -
> arch/sparc/cpu/leon2/serial.c | 51 ++-
> arch/sparc/cpu/leon3/serial.c | 51 ++-
> arch/x86/lib/board.c | 2 -
> board/Marvell/common/serial.c | 48 ++-
> board/amirix/ap1000/serial.c | 35 +-
> board/balloon3/balloon3.c | 5 -
> board/bmw/serial.c | 36 +-
> board/cogent/serial.c | 34 +-
> board/esd/cpci750/serial.c | 36 +-
> board/evb64260/serial.c | 54 ++-
> board/logicpd/zoom2/zoom2_serial.c | 7 +-
> board/logicpd/zoom2/zoom2_serial.h | 16 +-
> board/ml2/serial.c | 35 +-
> board/palmld/palmld.c | 5 -
> board/palmtc/palmtc.c | 5 -
> board/pcippc2/sconsole.c | 35 +-
> board/pdm360ng/pdm360ng.c | 6 -
> board/prodrive/p3mx/serial.c | 36 +-
> board/toradex/colibri_pxa270/colibri_pxa270.c | 5 -
> board/trizepsiv/conxs.c | 7 -
> board/vpac270/vpac270.c | 5 -
> board/zipitz2/zipitz2.c | 5 -
> common/Makefile | 1 -
> common/cmd_nvedit.c | 2 -
> common/fdt_support.c | 4 -
> common/iomux.c | 2 -
> common/serial.c | 305 --------------
> common/stdio.c | 2 -
> drivers/serial/Makefile | 4 +-
> drivers/serial/altera_jtag_uart.c | 39 +-
> drivers/serial/altera_uart.c | 51 ++-
> drivers/serial/atmel_usart.c | 35 +-
> drivers/serial/lpc32xx_hsuart.c | 57 ++-
> drivers/serial/mcfuart.c | 33 +-
> drivers/serial/ns16550.c | 2 +-
> drivers/serial/ns9750_serial.c | 33 +-
> drivers/serial/opencores_yanu.c | 35 +-
> drivers/serial/s3c4510b_uart.c | 33 +-
> drivers/serial/s3c64xx.c | 33 +-
> drivers/serial/sandbox.c | 35 +-
> drivers/serial/serial.c | 550
> +++++++++++++------------
> drivers/serial/serial_clps7111.c | 34 +-
> drivers/serial/serial_imx.c | 36 +-
> drivers/serial/serial_ixp.c | 36 +-
> drivers/serial/serial_ks8695.c | 41 +-
> drivers/serial/serial_lh7a40x.c | 34 +-
> drivers/serial/serial_lpc2292.c | 34 +-
> drivers/serial/serial_max3100.c | 42 +-
> drivers/serial/serial_mxc.c | 40 +-
> drivers/serial/serial_netarm.c | 33 +-
> drivers/serial/serial_ns16550.c | 264 ++++++++++++
> drivers/serial/serial_pl01x.c | 37 +-
> drivers/serial/serial_pxa.c | 65 +--
> drivers/serial/serial_s3c24x0.c | 78 +---
> drivers/serial/serial_s3c44b0.c | 36 +-
> drivers/serial/serial_s5p.c | 27 +-
> drivers/serial/serial_sa1100.c | 36 +-
> drivers/serial/serial_sh.c | 33 +-
> drivers/serial/serial_xuartlite.c | 69 ++--
> include/common.h | 12 -
> include/configs/DU440.h | 1 -
> include/configs/KAREF.h | 1 -
> include/configs/METROBOX.h | 1 -
> include/configs/MPC8569MDS.h | 1 -
> include/configs/P1010RDB.h | 1 -
> include/configs/P1_P2_RDB.h | 1 -
> include/configs/P2020COME.h | 1 -
> include/configs/PMC440.h | 1 -
> include/configs/TB5200.h | 1 -
> include/configs/amcc-common.h | 1 -
> include/configs/aria.h | 1 +
> include/configs/balloon3.h | 1 +
> include/configs/bfin_adi_common.h | 1 -
> include/configs/colibri_pxa270.h | 1 +
> include/configs/coreboot.h | 1 -
> include/configs/eNET.h | 1 -
> include/configs/harmony.h | 1 -
> include/configs/jadecpu.h | 1 -
> include/configs/korat.h | 1 -
> include/configs/lubbock.h | 1 +
> include/configs/lwmon.h | 1 -
> include/configs/lwmon5.h | 1 -
> include/configs/mcc200.h | 5 -
> include/configs/mecp5123.h | 1 +
> include/configs/medcom.h | 1 -
> include/configs/mpc5121ads.h | 1 +
> include/configs/omap3_zoom2.h | 3 +-
> include/configs/origen.h | 1 -
> include/configs/palmld.h | 1 +
> include/configs/palmtc.h | 1 +
> include/configs/paz00.h | 1 -
> include/configs/pcs440ep.h | 1 -
> include/configs/pdm360ng.h | 3 -
> include/configs/plutux.h | 1 -
> include/configs/pxa255_idp.h | 1 +
> include/configs/quad100hd.h | 1 -
> include/configs/s5p_goni.h | 1 -
> include/configs/s5pc210_universal.h | 1 -
> include/configs/sc3.h | 1 -
> include/configs/seaboard.h | 1 -
> include/configs/smdk5250.h | 1 -
> include/configs/smdkc100.h | 1 -
> include/configs/smdkv310.h | 1 -
> include/configs/tec.h | 1 -
> include/configs/tegra-common-post.h | 5 -
> include/configs/trats.h | 1 -
> include/configs/trimslice.h | 1 -
> include/configs/trizepsiv.h | 2 +-
> include/configs/ventana.h | 1 -
> include/configs/vpac270.h | 1 +
> include/configs/whistler.h | 1 -
> include/configs/xaeniax.h | 2 +-
> include/configs/zeus.h | 1 -
> include/configs/zipitz2.h | 1 +
> include/serial.h | 79 +---
> post/board/pdm360ng/coproc_com.c | 3 -
> 138 files changed, 2111 insertions(+), 1547 deletions(-)
> delete mode 100644 common/serial.c
> create mode 100644 drivers/serial/serial_ns16550.cThis has been applied, with the various follow-up patches that fixed warnings used, to u-boot/next, thanks! -- Tom
signature.asc
Description: Digital signature
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
