On Wed, Sep 26, 2012 at 04:04:14PM -0400, Andrew Bradford wrote:
> If configured to use UART{1,2,4,5}, such as on the Beaglebone RS232
> cape, enable the required clocks for the UART in use.
> 
> Signed-off-by: Andrew Bradford <and...@bradfordembedded.com>
> ---
>  arch/arm/cpu/armv7/am33xx/clock.c |   28 ++++++++++++++++++++++++++++
>  1 file changed, 28 insertions(+)
> 
> diff --git a/arch/arm/cpu/armv7/am33xx/clock.c 
> b/arch/arm/cpu/armv7/am33xx/clock.c
> index 2b19506..4eb9226 100644
> --- a/arch/arm/cpu/armv7/am33xx/clock.c
> +++ b/arch/arm/cpu/armv7/am33xx/clock.c
> @@ -114,6 +114,34 @@ static void enable_per_clocks(void)
>       while (readl(&cmwkup->wkup_uart0ctrl) != PRCM_MOD_EN)
>               ;
>  
> +     /* UART1 */
> +#ifdef CONFIG_SERIAL2
> +     writel(PRCM_MOD_EN, &cmper->uart1clkctrl);
> +     while (readl(&cmper->uart1clkctrl) != PRCM_MOD_EN)
> +             ;
> +#endif /* CONFIG_SERIAL2 */
> +
> +     /* UART2 */
> +#ifdef CONFIG_SERIAL3
> +     writel(PRCM_MOD_EN, &cmper->uart2clkctrl);
> +     while (readl(&cmper->uart2clkctrl) != PRCM_MOD_EN)
> +             ;
> +#endif /* CONFIG_SERIAL3 */

Profile 5 on the AM335x EVM supports UART3. I know we discussed on IRC
that BeagleBone doesn't have that uart pinned out, but I think since
this is generic code *and* it can be tested on the full EVM, you should
include support for it here.

> +
> +     /* UART4 */
> +#ifdef CONFIG_SERIAL5
> +     writel(PRCM_MOD_EN, &cmper->uart4clkctrl);
> +     while (readl(&cmper->uart4clkctrl) != PRCM_MOD_EN)
> +             ;
> +#endif /* CONFIG_SERIAL5 */
> +
> +     /* UART5 */
> +#ifdef CONFIG_SERIAL6
> +     writel(PRCM_MOD_EN, &cmper->uart5clkctrl);
> +     while (readl(&cmper->uart5clkctrl) != PRCM_MOD_EN)
> +             ;
> +#endif /* CONFIG_SERIAL6 */
> +
>       /* MMC0*/
>       writel(PRCM_MOD_EN, &cmper->mmc0clkctrl);
>       while (readl(&cmper->mmc0clkctrl) != PRCM_MOD_EN)
> -- 
> 1.7.10
> 
> _______________________________________________
> U-Boot mailing list
> U-Boot@lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to