Hi Troy, On Wed, Aug 22, 2012 at 4:21 PM, Troy Kisky <troy.ki...@boundarydevices.com> wrote: > On 8/22/2012 1:40 PM, Andy Fleming wrote: >> >> >> >> 1) Modify the driver so that the PHY address is passed in from board >> initialization code programmatically. As a nod to the effort of doing >> so for all boards, you can create a default value (ie - as it was), >> that can be overridden by board code. >> 2) Modify the search function to look for a valid PHY for a given >> mask, and return the address of that PHY >> 3) Add code to the board file which passes in the mask to the search >> function, and then passes the resulting PHY address to the driver. >> >> For a somewhat elaborate example of this, look at drivers/net/tsec.c. >> tsec_standard_init() and tsec_eth_init(). >> >> Andy >> > Thanks for providing some direction. I think I know what you are after now.
Are you planning to update this before the release? Thanks, -Joe _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
