Dear Albert Aribaud, any chance to get this pulled before -rc2?
Best regards Andreas Bießmann On 22.09.2012 05:36, Andreas Bießmann wrote: > Another resent ... sorry for the noise! > I found the root cause why it did not appear on patchwork, my > sendemail.assume8bitencoding was set to 'true' but it should be set to > 'UTF-8'. Therefore the header where corupted (Content-Type: text/plain; > charset=true). This mail should finally reach patchwork now. > > resent cause the old one didn't make its way into patchwork. > > Dear Albert Aribaud, > > as mentioned before there are some fixes left for this upcoming release, here > they are. > > The following changes since commit 057df193b40d31799d41d43bc832a972f658bfe4: > > Merge remote-tracking branch 'u-boot-ti/master' into m (2012-09-05 20:20:04 > +0200) > > are available in the git repository at: > > > git://git.denx.de/u-boot-atmel.git master > > for you to fetch changes up to dc3e30bab7c5ef87bd24ebcbb7cdfc3fb2b44555: > > Atmel: sam9g10/9m10/9x5: Add support to boot DT kernel (2012-09-17 19:02:44 > +0200) > > ---------------------------------------------------------------- > Bo Shen (3): > spi: add atmel at25df321 serial flash support > spiflash: at25: using common spi flash operation > Atmel: sam9g10/9m10/9x5: Add support to boot DT kernel > > Wu, Josh (2): > at91sam9x5: set default EBI I/O drive configuration. > atmel_nand: fix the U-Boot output information about nand flash with > PMECC enable. > > board/atmel/at91sam9x5ek/at91sam9x5ek.c | 4 ++++ > drivers/mtd/nand/atmel_nand.c | 5 +++-- > drivers/mtd/spi/atmel.c | 17 ++++++++++++++++- > include/configs/at91sam9261ek.h | 2 ++ > include/configs/at91sam9m10g45ek.h | 2 ++ > include/configs/at91sam9x5ek.h | 2 ++ > 6 files changed, 29 insertions(+), 3 deletions(-) > > Best regards > > Andreas Bießmann > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
