Dear Łukasz Dałek,
> On 22.09.2012 19:04, Marek Vasut wrote:
> > Dear Łukasz Dałek,
> >
> >> On 19.09.2012 23:02, Marek Vasut wrote:
> >>>> and at the offset
> >>>> + * 0x40 ascii characters 'ECEC', secondly 1st stage
> >>>> + * loads code from flash into SDRAM at address 0xa0040000
> >>>> + * so all instructions which reinitializes memory
> >>>> + * controller have to be disabled.
> >>>> + */
> >>>> +
> >>>> +static inline void writelrb(uint32_t val, uint32_t addr)
> >>>
> >>> Replace this with clrsetbits_le32()
> >>
> >> I've copied writelrb and pxa2xx_dram_init from pxa2xx.c
> >> and I think there is a reason why it's done that way and not by
> >> clrsetbits_le32. But if you insist I can replace all calls to writelrb
> >> by clrsetbits.
> >
> > And can you elaborate on the reason please?
> >
> > (hint: clrsetbits() wasn't there by the time)
>
> I don't know what was the reason. I didn't change becuse I didn't
> want to break it.
If you have time, replace it with clrsetbits() please ... in the original file.
> >>>> +{
> >>>> + writel(val, addr);
> >>>> + asm volatile("" : : : "memory");
> >>>> + readl(addr);
> >>>> + asm volatile("" : : : "memory");
> >>>> +}
> >>>> +
> >>>> +static void h2200_pxa2xx_dram_init(void)
> >>>
> >>> Why do you duplicate it ?!
> >>>
> >>> [...]
> >>
> >> Because code in pxa2xx.c disable and then re-enable memory.
> >> And u-boot is executed from memory (1st stage bootloder
> >> copied it there).
> >
> > So don't reinit the memory at all, just skip this whole part.
>
> 1st stage loader doesn't init everything (for example MSC).
So I checked ... every board calls the dram init on it's own in dram_init() ...
so just don't do that.
> >>> +
> >>> +# define CONFIG_USB_ETHER 1
> >>> +# define CONFIG_USBNET_DEV_ADDR "de:ad:be:ef:00:01"
> >>> +# define CONFIG_USBNET_HOST_ADDR "de:ad:be:ef:00:02"
> >>> Definitelly not, any mac address setting should not be present, Joe ?
> >>
> >> So tell me how should I specify mac addresses? By EXTRA_ENV_SETTINGS?
> >
> > Joe explained it, your adapter doesn't carry it's own mac?
>
> No.
Then leave it in ?
> Łukasz Dałek
Best regards,
Marek Vasut
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
