On 08/17/2012 09:59 AM, Prafulla Wadaskar wrote: > > >> -----Original Message----- >> From: Valentin Longchamp [mailto:valentin.longch...@keymile.com] >> Sent: 16 August 2012 16:47 >> To: u-boot@lists.denx.de >> Cc: Valentin Longchamp; Holger Brunck; Prafulla Wadaskar; Joe >> Hershberger >> Subject: [PATCH] net/phy: support the mv88e6352 switch >> >> This patch add support for the configuration of an external switch >> from >> the 88E6xxx series from Marvell trough an MDIO link using indirect >> adressing. This can be used if we do not want to use an EEPROM for the >> configuration. >> >> This driver is not generic and was not tested on other switches than >> the >> 88e6352. This is proposed as a first implementation that is somewhat >> limited but works and that can be used as a basis for further >> developments for this switch family. >> >> Signed-off-by: Valentin Longchamp <valentin.longch...@keymile.com> >> cc: Holger Brunck <holger.bru...@keymile.com> >> cc: Prafulla Wadaskar <prafu...@marvell.com> >> cc: Joe Hershberger <joe.hershber...@gmail.com> >> --- >> drivers/net/phy/Makefile | 1 + >> drivers/net/phy/mv88e6352.c | 318 >> +++++++++++++++++++++++++++++++++++++++++++ >> include/mv88e6352.h | 92 +++++++++++++ >> 3 files changed, 411 insertions(+), 0 deletions(-) >> create mode 100644 drivers/net/phy/mv88e6352.c >> create mode 100644 include/mv88e6352.h > > Hi Valentin > > I do not have any specific feedback for this patch, > To me this looks okay. > > Joe may pull it if he finds everything okay. > > Regards... > Prafulla . . . >
Hi Joe, We have never received any feedback from you regarding this patch. Could you please consider review it and if applicable apply it since it is a dependency for another series in the Marvell tree. Thank you and best regards Valentin _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
