On Wed, Sep 19, 2012 at 1:00 PM, Otavio Salvador <ota...@ossystems.com.br> wrote: > On Wed, Sep 19, 2012 at 2:57 PM, Robert Nelson <robertcnel...@gmail.com> > wrote: >> On Wed, Sep 19, 2012 at 10:13 AM, Otavio Salvador >> <ota...@ossystems.com.br> wrote: >>> OpenEmbedded has change partitioning layout of generated image so it >>> does not raise warnings during the boot regarding unkown partition >>> being used for U-Boot. >>> >>> Signed-off-by: Otavio Salvador <ota...@ossystems.com.br> >>> --- >>> include/configs/mx6qsabrelite.h | 8 +++----- >>> 1 file changed, 3 insertions(+), 5 deletions(-) >>> >>> diff --git a/include/configs/mx6qsabrelite.h >>> b/include/configs/mx6qsabrelite.h >>> index 72d0154..0d5fd40 100644 >>> --- a/include/configs/mx6qsabrelite.h >>> +++ b/include/configs/mx6qsabrelite.h >>> @@ -141,12 +141,10 @@ >>> #define CONFIG_EXTRA_ENV_SETTINGS \ >>> "script=boot.scr\0" \ >>> "uimage=uImage\0" \ >>> - "console=ttymxc1\0" \ >>> - "fdt_high=0xffffffff\0" \ >>> - "initrd_high=0xffffffff\0" \ >> >> Your going to need fdt_high/initrd_high for when using linux device tree's... > > I am not against keeping it but it is not used right now.
It may not be used in openembedded, but device tree is the only option for a pure mainline kernel for this board, so it's needed. ;) Regards, -- Robert Nelson http://www.rcn-ee.com/ _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
